About Xuzhou Metalforming Machine Group Co., Ltd - Heavy Machinery Supplier in China

Xuzhou Metalforming Machine Group Co., Ltd is based in China. The company lists five active products in its catalogue, all classified under heavy machinery. The portfolio includes several power press models such as the Jh21-100 series C‑frame, Jh21‑200, VH‑45, Jh36‑400a and the JE25 series C‑type two‑point press. Each product is identified by its model designation without additional specifications in the public listing. The catalogue focuses on metal‑forming equipment used in stamping and forging operations.

The listed items fall under the power press segment, which is commonly coded under HS Chapter 84 for machinery. The models cover a range of tonnage and frame configurations, typical for medium to large stamping lines. No HS codes are supplied in the catalogue, so buyers must verify the appropriate tariff classification based on machine specifications. The supplier is classified as an imported tier with a harbor trust rating, indicating compliance with basic trade verification standards. Buyers can expect the product names to correspond to standard industry naming conventions for press equipment.

Product Range and Specialties of Xuzhou Metalforming Machine Group Co., Ltd

The catalogue enumerates five distinct press machines: the Jh21-100 series C‑frame, Jh21‑200, VH‑45, Jh36‑400a and the JE25 series C‑type two‑point press. In the heavy‑machinery market, such presses are typically offered in tonnage ratings from 10 t to 250 t, with frame sizes measured in millimetres and drive speeds expressed in strokes per minute. Industry standards often reference DIN 66006 for safety and performance, and buyers look for specifications such as maximum pressing force, stroke length, and drive type (hydraulic or mechanical). While the supplier’s listing does not detail these parameters, the model names align with common naming schemes used by Chinese manufacturers for medium‑ to high‑capacity presses.

Typical specifications for presses in this category include a frame rigidity measured in millimetres, hydraulic pressure ranges up to 200 MPa, and control systems that meet IEC 60204‑1 electrical safety standards. Buyers frequently request material certifications for the press frame (often structural steel grade Q235 or higher) and performance test reports that confirm repeatability and cycle time. The absence of explicit grades in the catalogue means that buyers should ask for detailed data sheets before finalising a purchase.

Trade and Export Information - Xuzhou Metalforming Machine Group Co., Ltd

China is a major exporter of heavy‑machinery, and power presses are shipped worldwide to automotive manufacturers, aerospace component makers, and general metal‑fabrication plants. The relevant HS code for most power presses is 8428.99, which falls under the broader Chapter 84 tariff line for machinery. Export shipments are usually packed in wooden crates or steel frames, loaded into 40‑ft containers, and transported under Incoterms such as FOB or CIF. Buyers in Europe, North America and Southeast Asia commonly require evidence of compliance with ISO 9001 quality management and, where applicable, CE marking for equipment placed on the EU market.

Chinese heavy‑machinery exporters often provide pre‑shipment inspection reports from agencies such as SGS or Bureau Veritas. Import regulations may demand conformity to local safety directives, for example the EU Machinery Directive 2006/42/EC or the US OSHA standards for press safety. Documentation typically includes the commercial invoice, packing list, bill of lading, and a test certificate that verifies maximum load capacity and emergency stop functionality.

Sourcing from Xuzhou Metalforming Machine Group Co., Ltd - Buyer Guidance

When sourcing power presses from this supplier, buyers should request a complete technical data sheet that lists tonnage, frame dimensions, stroke length, drive type and compliance with DIN or ISO safety standards. Samples are not practical for full‑scale presses, but a factory‑visited demonstration or a video of the machine in operation can verify build quality and control system responsiveness. Buyers should also obtain a recent third‑party inspection report, material certification for the frame, and proof of any applicable certifications such as ISO 9001 or CE marking before committing to a contract.

Verification of the machine’s hydraulic system pressure rating and the availability of spare parts is essential for long‑term operation. Clarify the packaging method (e.g., reinforced wooden crate with anti‑corrosion coating) and the preferred Incoterm, as these affect freight handling and insurance. Finally, confirm the lead time for production and delivery, which for custom‑configured presses can range from 8 to 16 weeks depending on order size and any required engineering modifications.

What types of press machines does Xuzhou Metalforming Machine Group list in its catalogue?

The catalogue lists five models: Jh21-100 series C‑frame, Jh21‑200, VH‑45, Jh36‑400a and the JE25 series C‑type two‑point power press.

Which HS code family do these press machines fall under?

Power presses are generally classified under HS Chapter 84, specifically code 8428.99 for other presses not elsewhere specified.

What specifications should a buyer request for these presses?

Buyers should ask for tonnage capacity, frame size, stroke length, drive type (hydraulic or mechanical), and compliance with DIN 66006 or IEC 60204‑1 safety standards.

Are any certifications automatically held by the supplier?

The supplied facts do not list any certifications; buyers should request copies of ISO 9001, CE marking or other relevant certificates as part of due diligence.

What typical markets import Chinese power presses?

Typical import markets include automotive and aerospace manufacturers in Europe, North America and Southeast Asia, where stamping and forming operations are common.

What packaging and shipping methods are standard for these machines?

Presses are usually crated in reinforced wooden boxes, sometimes with steel supports, and shipped in 40‑ft containers under FOB or CIF terms.

What documents are needed for customs clearance of these machines?

Customs generally require a commercial invoice, packing list, bill of lading, HS code declaration and, if requested, a third‑party inspection certificate.

How long is the typical lead time for a new press order from this supplier?

Lead times for custom‑configured presses often range from eight to sixteen weeks, depending on the model and any additional engineering specifications required.