About Wuxi Rotech Metalwork Co., Ltd. - Motorcycle Parts Supplier in China

Wuxi Rotech Metalwork Co., Ltd. is based in China and currently lists six active products in its catalogue. The company focuses on motorcycle components, specifically items that are integral to the vehicle’s handling and performance. Its product list includes exhaust systems, alloy wheels, handle bars, rims, disc brakes and handle levers. Each entry falls under the broader motorcycle parts category and is intended for OEM or aftermarket use. The catalogue does not provide additional technical specifications, so buyers must obtain detailed data directly from the supplier.

The six products are typical of the parts classified under HS chapter 87 for motor vehicle accessories, although specific HS codes are not disclosed. Materials commonly used include aluminium alloys for wheels and rims, steel or alloy steel for brake discs, and various metal alloys for handlebars and levers. Finishes may range from powder‑coat to chrome plating depending on the component. Dimensions and weight vary by model, with alloy wheels often weighing between 8 and 12 kg and brake discs ranging from 250 mm to 350 mm in diameter. Buyers should request precise drawings and material certificates to confirm suitability.

Product Range and Specialties of Wuxi Rotech Metalwork Co., Ltd.

The catalogue offers a concise set of motorcycle parts: exhaust, alloy wheel, handle bar, rim, disc brake and handle lever. In the industry, exhaust systems are typically made from stainless steel or high‑temperature alloy steel, with wall thicknesses between 1.2 mm and 2.0 mm to balance durability and weight. Alloy wheels are usually forged or cast from aluminium‑magnesium alloys, graded by standards such as ISO 20957‑1 for strength and impact resistance. Handle bars and levers are often fabricated from chrome‑molybdenum steel, meeting ASTM A193 specifications for tensile strength and fatigue life. Disc brakes are produced to ECE R90 specifications, with ventilated or solid designs and surface hardness around 55‑60 HRC. Rims follow the same alloy standards as wheels, with tolerances defined by ISO 6846 for diameter and bolt‑pattern accuracy.

Typical industry grades for these components include aluminium alloy series 6000 for wheels (e.g., 6061‑T6) and high‑strength steel grades such as 42CrMo4 for handlebars. Surface treatments like anodizing or powder coating are common to improve corrosion resistance. Buyers usually assess parameters such as weight, dimensions, material composition, surface finish, and compliance with relevant safety standards before placing orders.

Trade and Export Information - Wuxi Rotech Metalwork Co., Ltd.

China is a major exporter of motorcycle components, supplying markets in Europe, North America, and Southeast Asia. Export shipments are generally classified under HS 8708 for parts and accessories of motor vehicles, and customs documentation often requires a certificate of origin and compliance certificates. Commonly requested certifications include ISO 9001 for quality management, CE marking for EU markets, and ECE R90 for brake components. Packaging for bulk shipments typically involves wooden pallets or bulk crates, with components protected by foam inserts or corrugated liner to prevent damage during handling.

Incoterms such as FOB Shanghai or CIF Los Angeles are frequently used, allowing buyers to manage freight and insurance according to their preferences. Chinese manufacturers often work with freight forwarders experienced in handling metal parts, ensuring proper container loading (e.g., 20‑ft containers for smaller volumes or 40‑ft containers for larger orders). Export controls require compliance with the EU REACH regulation for hazardous substances, and the US EPA’s Toxic Substances Control Act for certain metal alloys, so buyers should verify that appropriate test reports are provided.

Sourcing from Wuxi Rotech Metalwork Co., Ltd. - Buyer Guidance

When sourcing from Wuxi Rotech Metalwork, buyers should request material test reports that confirm alloy composition, tensile strength, and hardness for each component. For brake discs, a performance test report showing compliance with ECE R90 or equivalent standards is essential, as is a corrosion resistance test for wheels and rims. It is advisable to obtain a full technical drawing with dimensions, weight, and surface finish specifications before confirming order quantities.

Buyers should also ask for a copy of the supplier’s ISO 9001 certificate if available, and verify any CE or ECE approvals that apply to the specific parts. Typical minimum order quantities in the Chinese motorcycle parts sector start at 100 - 200 units per SKU, with lead times ranging from 30 to 60 days after order confirmation. Packaging details - such as wooden crates, palletization, and protective padding - should be clarified to ensure safe transit.

What motorcycle component categories does Wuxi Rotech Metalwork list in its catalogue?

The catalogue includes six items: exhaust systems, alloy wheels, handle bars, rims, disc brakes and handle levers, all classified as motorcycle parts.

How can I request a sample of the alloy wheel?

Buyers can ask the supplier to ship a standard‑size sample in a wooden crate or cardboard box, with the material grade and dimensions clearly marked on the accompanying documentation.

Which certifications should I verify for the disc brake?

For disc brakes, request compliance with ECE Regulation 90, a material test report showing hardness (typically 55‑60 HRC), and any available ISO 9001 quality‑management certification.

What are typical minimum order quantities for the rim and handle lever?

MOQs in this segment usually start at 100 - 200 units per model, but the exact figure should be confirmed with the supplier for each specific SKU.

What lead time should I expect for these motorcycle parts?

Production lead times commonly range from 30 to 60 days after order confirmation, depending on the component’s complexity and any required finish treatments.

What packaging and shipping methods are used for these parts?

Items are typically packed on wooden pallets or in bulk crates, secured with stretch film, and shipped under FOB or CIF terms to major ports.

Which documents are normally required before shipment?

Buyers should request a commercial invoice, packing list, certificate of origin, material test reports, and any applicable compliance certificates such as CE or ECE approvals.

Which regions commonly import Chinese motorcycle parts?

Major import destinations include the United States, European Union countries, and Southeast Asian markets, where the parts serve both OEM and aftermarket applications.