About Valco Industries - Aluminum Hardwares Supplier in Unknown

Valco Industries' country of origin is not specified in the available data. The company lists five active products across its top categories of Aluminum Hardwares, Agriculture, Machined Components and Aluminum Tubes. Its catalogue focuses on aluminium extrusion items, ranging from heat sinks and anti‑vibration parts to extrusion profiles, tubes and solar frames. Each product is described by material alloy specifications such as 6063‑T5, 6061‑T6, 6005‑T5 and EN‑designated grades. The supplier’s active product count of five reflects a narrow but specialised offering within the aluminium extrusion sector.

Two of the listed items carry HS codes in the 7604.21 family for aluminium extrusion profiles and solar profiles, while the aluminium extruded tubes are classified under HS code 7608.20. These codes correspond to the global customs tariff headings for aluminium bars, rods, profiles and tubes. The catalogue does not provide additional HS codes for the heat sink or anti‑vibration parts, which are typically grouped under the same 7604 chapter. Material designations include Aluminium Alloy 6063‑T5 / 6061‑T6 for profiles and 6005‑T5 / 6063‑T5 for solar frames, indicating standard engineering alloys used in construction and photovoltaic applications.

Product Range and Specialties of Valco Industries

Valco Industries supplies aluminium extrusion products that are manufactured from alloy series 6000, specifically 6063‑T5, 6061‑T6 and 6005‑T5. In the extrusion industry, these alloys are recognised for their good formability, corrosion resistance and strength, and are commonly delivered to tolerances of ±0.2 % of the nominal dimension with surface finishes ranging from mill‑finish to anodised coating. Standard profile dimensions for heat‑sink plates and anti‑vibration brackets fall between 20 mm and 200 mm in width, with thicknesses from 2 mm to 30 mm, and are typically shipped in 20‑ft containers with protective wood or cardboard packaging. Buyers of aluminium solar profiles usually request extrusions that meet EN 755‑2 specifications for structural applications and IEC 61215 compliance for photovoltaic mounting systems.

Trade and Export Information - Valco Industries

Aluminium extrusion products with HS codes 7604.21 and 7608.20 are routinely exported from manufacturing hubs in Asia to construction and renewable‑energy markets in Europe, the Middle East and South‑East Asia. Importers often require ISO 9001 quality‑management certification and, for solar‑frame applications, CE marking or IEC conformity to demonstrate compliance with safety and performance standards. Standard export packaging includes bundled profiles secured with steel straps, placed in moisture‑resistant wooden crates, and loaded in 20‑ft or 40‑ft containers under FOB or CIF terms. Customs inspections commonly verify alloy composition certificates and HS‑code declaration against the product description.

Sourcing from Valco Industries - Buyer Guidance

When sourcing aluminium extrusion from Valco Industries, buyers should request a mill test report (MTR) that confirms the alloy designation, temper, tensile strength and chemical composition for each alloy grade. It is advisable to obtain a product data sheet that lists dimensional tolerances, surface‑finish specifications and any heat‑treatment certificates. For solar‑profile orders, buyers typically ask for CE‑type test reports and IEC‑61215 test results. Verifying that the supplier can provide ISO 9001 certification and confirming the packaging plan (e.g., crate dimensions, moisture barriers) helps prevent delays at port.

What aluminium alloy grades does Valco Industries offer in its extrusion products?

The catalogue lists extrusions made from Aluminium Alloy 6063‑T5, 6061‑T6, and 6005‑T5 (EN AW‑6063 / EN AW‑6061). These are standard 6000‑series alloys used for structural and architectural applications.

Which HS codes apply to the aluminium extrusion profiles and tubes listed?

The aluminium extrusion profile and solar profile are classified under HS code 7604.21, while the extruded tubes fall under HS code 7608.20. Both codes belong to Chapter 76 for aluminium products.

Are mill test reports available for the 6063‑T5 and 6061‑T6 materials?

Typical suppliers of these alloys provide a Mill Test Report that details chemical composition, tensile strength and temper. Buyers should request the MTR before finalising a purchase.

What typical dimensions and tolerances are provided for the extruded heat sinks?

Heat‑sink extrusions are commonly produced in widths of 20 mm to 200 mm, thicknesses of 2 mm to 30 mm, and length up to 2000 mm. Dimensional tolerance is usually ±0.2 % of the nominal size, with a surface roughness Ra ≤ 1.6 µm for mill‑finish.

Which certifications should a buyer request for solar‑profile purchases?

For solar‑frame applications buyers normally request CE marking, IEC 61215 test reports, and a copy of the supplier’s ISO 9001 certificate to verify quality‑management compliance.

What are the usual minimum order quantities and lead times for extrusion profiles?

Minimum order quantities often start at one standard 6‑meter length per profile, with typical lead times of 4  -  6 weeks after order confirmation, depending on alloy and finish.

How are the aluminium tubes packaged for international shipment?

Extruded aluminium tubes are bundled, strapped with steel bands, placed in moisture‑resistant wooden crates, and loaded in 20‑ft or 40‑ft containers. The packaging protects against deformation and corrosion during sea transit.

Which regions are the main import markets for the listed aluminium products?

Exporters of aluminium extrusion from the 7604 and 7608 HS chapters commonly supply Europe, the Middle East and South‑East Asian construction and photovoltaic sectors, where demand for lightweight structural components is high.