About Tct Trade - Hand Sanitizer Supplier in United States

Tct Trade is based in the United States and currently lists five active products across its catalogue. The company offers Hand Sanitizer and a separate entry titled Sanitizer, both positioned within the personal hygiene segment. It also lists three metal‑related commodities: Carbon Anode Scrap/Butts classified under HS code 3801.90 and described as petroleum‑coke based carbon with binder pitch, ALUMINA OXIDE under HS code 2818.20 identified as calcined Al₂O₃, and Zorba 97 % Metallic with 2 % Red Metals under HS code 7404.00, a mixed non‑ferrous scrap grade based on aluminum with copper/brass content. These entries cover the categories of Hand Sanitizer, Metal Scraps, Medical Face Masks, and Aluminum Oxide as indicated in the supplier’s top categories.

Each listed item aligns with a distinct HS chapter: the sanitizer products fall within Chapter 38 for chemical preparations, while the metal scrap items belong to Chapters 38, 28 and 74 respectively. The catalogue does not provide additional specifications such as container size or purity, but the HS codes suggest compliance with standard customs classifications used for bulk chemical and scrap shipments. The inclusion of Medical Face Masks in the top categories indicates a potential but unlisted product line within the personal protective equipment segment. Overall, the supplier’s portfolio spans consumer‑grade hygiene formulations and industrial‑grade metal feedstocks, reflecting a diversified product base.

Product Range and Specialties of Tct Trade

The Hand Sanitizer and Sanitizer entries fall under the personal hygiene chemical segment, where WHO‑recommended formulations contain 60‑70 % ethyl or isopropyl alcohol, glycerol, and a small amount of hydrogen peroxide, typically packaged in 100 ml to 5 L containers and produced under GMP guidelines such as ISO 22716. Carbon Anode Scrap/Butts is a petroleum‑coke based material used as feedstock in aluminum smelting; typical grades contain ≥85 % carbon with low ash and are shipped in bulk bags or drums. Calcined alumina (Al₂O₃) is usually supplied at 99.5 % purity or higher, with particle sizes below 100 µm, serving refractory, ceramics and electronics markets; it is commonly packed in 25 kg paper‑lined bags. Zorba grade scrap, comprising approximately 97 % aluminum and 2 % red metals (copper/brass), is a standard feedstock for secondary aluminum production and is generally baled in 1‑ton bundles for efficient handling.

Trade and Export Information - Tct Trade

United States exporters of chemical preparations such as hand sanitizers typically ship to Canada, the European Union and Middle‑East markets, where importers require compliance with local health authority regulations (e.g., EU Cosmetic Regulation No 1223/2009) and may request certificates of analysis and safety data sheets. Metal scrap exports from the US are governed by EPA and RCRA regulations; the Carbon Anode Scrap (HS 3801.90) and Zorba scrap (HS 7404.00) are often sent to smelters in China, the EU and the Gulf Cooperation Council states, using 20‑ft containers loaded with bulk bags or steel‑strapped bales. Calcined alumina (HS 2818.20) is a key input for refractory and electronics manufacturers in Asia and Europe, usually packed in 25 kg bags and shipped under FOB or CIF terms. Buyers generally expect ISO 9001 quality management certification, and for environmental compliance they may request ISO 14001 or EPA‑specific documentation.

Sourcing from Tct Trade - Buyer Guidance

When sourcing hand sanitizer, request the latest material safety data sheet (MSDS), a certificate of analysis showing alcohol concentration, and evidence of compliance with FDA or EU cosmetic regulations. For carbon anode scrap, obtain a material test report confirming carbon content, ash level, and a compliance statement with EPA RCRA rules; ISO 14001 environmental certification is commonly provided. Calcined alumina buyers should ask for a purity certificate, particle‑size distribution report, and proof of ISO 9001 certification. For Zorba scrap, request a composition analysis (percentage of aluminum, copper and brass), a baling specification sheet, and any applicable environmental compliance documents. Verify that the HS codes on the commercial invoice match the catalogue entries, and confirm packaging dimensions (e.g., 1‑ton bales or 25 kg bags) before finalizing the order.

What HS codes are associated with Tct Trade’s metal scrap products?

The Carbon Anode Scrap/Butts is listed under HS code 3801.90, ALUMINA OXIDE under 2818.20, and the Zorba mixed non‑ferrous scrap under 7404.00.

Are safety data sheets available for the Hand Sanitizer products?

Suppliers of hand sanitizer typically provide an MSDS that details alcohol content, ingredient list and handling precautions; buyers should request the latest MSDS before shipment.

What typical purity is expected for the calcined alumina offered?

Calcined alumina exported from the United States usually meets a purity of 99.5 % Al₂O₃ and is supplied in 25 kg bags complying with ISO 9001 quality management standards.

How is Zorba scrap usually packaged for export?

Zorba grade scrap is commonly baled or bundled in 1‑ton units, wrapped with steel strapping and loaded into 20‑ft containers for maritime transport.

What certifications should buyers request for the carbon anode scrap?

Buyers normally ask for a material test report confirming carbon content and a compliance statement with EPA RCRA regulations; ISO 14001 environmental certification is also common.

Which markets most frequently import US‑origin hand sanitizer?

Major importers include Canada, the European Union and Middle‑East countries, where buyers often require compliance with local health authority regulations such as EU Cosmetic Regulation (EC) No 1223/2009.