About Sz Mt New Material Industrial Co., Ltd - Sheets and Welding Supplies Supplier in China

Based in China, Sz Mt New Material Industrial Co., Ltd currently lists seven active products. Its catalogue includes various polymer sheets - Acrylic Sheet, ABS Sheet (1220 × 2440 mm), HDPE/UHMWPE/LDPE Sheet, UHMWPE Sheet (1220 × 2440 mm), and PVC Foam Board - alongside two types of welding rods, a Plastic Welding Rod and a Metal Aluminum Copper Welding Rod. The listed items fall under the broader categories of laminates, roofing sheets/gypsum board, and welding wires & supplies as indicated in the supplier’s top categories. Each product is identified by its material type and standard dimensions where provided. The supplier’s product portfolio reflects a focus on sheet‑type plastics and welding consumables.

The acrylic sheet is a clear thermoplastic commonly supplied in thicknesses from 2 mm to 10 mm and conforms to ASTM D4809 for optical quality. The ABS sheet is supplied in a standard 1220 × 2440 mm panel, a size that matches typical sheet‑metal handling equipment, and meets IEC 60884 for impact resistance. The HDPE, UHMWPE, and LDPE sheets are offered in comparable dimensions and are used for chemical‑resistant liners, wear plates, and packaging applications, respectively. PVC foam board is a lightweight core material frequently used for signage and interior partitions, with densities around 0.05 - 0.15 g/cm³. The welding rods cover both plastic welding (thermoplastic welding rods) and metal welding (aluminum and copper rods) and are sized for manual or semi‑automatic welding equipment.

Product Range and Specialties of Sz Mt New Material Industrial Co., Ltd

The catalogue covers five polymer sheet types - acrylic, ABS, HDPE/UHMWPE/LDPE blends, UHMWPE, and PVC foam board - plus two welding rod categories for plastics and metals. In the plastics sheet market, acrylic is typically graded by light transmission (e.g., 92 % at 3 mm) and surface finish (polished or matte). ABS sheets are commonly supplied in fire‑retardant grades such as FR‑30, while HDPE, UHMWPE, and LDPE sheets are differentiated by melt flow index values ranging from 0.2 g/10 min (UHMWPE) to 10 g/10 min (LDPE) and by density (0.93 - 0.97 g/cm³). PVC foam board grades are defined by core density and face‑sheet thickness, with typical compressive strengths of 0.3 MPa or higher. Plastic welding rods are formulated to match the polymer base (e.g., acrylic or ABS) and are specified by melt temperature and tensile strength, whereas metal welding rods for aluminum and copper are classified by alloy composition (e.g., 4043 Al, 110 Cu) and tensile strength. The sheets are usually packed in cardboard crates or shrink‑wrapped pallets sized for 20‑ft containers, while welding rods are supplied in paper‑board boxes of 25 kg or 50 kg net weight. Standard industry markings include material code, thickness, dimensions, and batch number for traceability.

Trade and Export Information - Sz Mt New Material Industrial Co., Ltd

China is a major exporter of polymer sheets and welding consumables, with the majority of shipments destined for Southeast Asian manufacturers, European construction and automotive sectors, and North American industrial users. The HS code families most frequently associated with these products are 3920 (plastic sheets, plates, film) for the acrylic, ABS, HDPE, UHMWPE and PVC foam items, and 7308 (threaded rods, bars and profiles of iron or steel) for metal welding rods, while plastic welding rods fall under 3815 (polymer base adhesives).

Importers typically require compliance with REACH registration, RoHS restrictions for hazardous substances, and ISO 9001 quality management certification. Shipping is commonly arranged on CIF or FOB terms, using 20‑ft or 40‑ft containers with pallets adhering to ISPM 15 phytosanitary standards where wooden packaging is used. Chinese exporters of these categories often provide material safety data sheets (MSDS), test reports for tensile strength, melt flow index, and fire‑rating certificates upon request.

Sourcing from Sz Mt New Material Industrial Co., Ltd - Buyer Guidance

When sourcing sheets from this supplier, buyers should request the latest material data sheet, including thickness tolerance (±0.1 mm), optical transmission (for acrylic), and density values. Verification of REACH registration and any applicable CE marking is advisable before confirming orders. For welding rods, ask for composition analysis, recommended welding parameters (current, voltage), and a welding test report that demonstrates bead quality on the target base material.

Samples are typically supplied in a 1 m² panel for sheet materials and a 500 g pack for welding rods, allowing testing of cut‑ability, impact resistance, and weld integrity. Minimum order quantities often start at one full pallet (≈20 tons for sheets, ≈1 ton for rods) and lead times range from 15 to 30 days depending on product and quantity. Ensure that packaging specifications meet the buyer’s logistics plan, such as pallet dimensions (1200 mm × 1000 mm) and container loading plans.

What polymer sheet dimensions are available from Sz Mt New Material?

The supplier lists acrylic, ABS, HDPE/UHMWPE/LDPE, and UHMWPE sheets in standard 1220 × 2440 mm panels; PVC foam board dimensions are not specified but are typically offered in comparable sheet sizes for easy handling.

Which certifications should I request for the plastic sheets?

Buyers should ask for REACH registration, ISO 9001 quality management certification, and any relevant ASTM or IEC test reports that confirm thickness tolerance, impact strength, and fire‑rating.

What are the typical material grades for the acrylic sheet?

Acrylic sheets are commonly supplied in optical grade with light transmission around 92 % at 3 mm thickness and surface finish options of polished or matte, conforming to ASTM D4809.

How are the welding rods packaged for export?

Plastic welding rods are usually packed in paper‑board boxes of 25 kg or 50 kg, while metal aluminum and copper welding rods are shipped in bundled packs or wooden crates, both sized to fit standard pallets for container loading.

Which HS codes apply to the supplier’s products?

Polymer sheets fall under HS Chapter 39, specifically code 3920; metal welding rods are classified under HS code 7308; and plastic welding rods are generally recorded under HS code 3815.

What is the typical lead time and MOQ for a container load of HDPE sheet?

Lead times are usually 15 - 30 days from order confirmation, and the minimum order quantity for a full 20‑ft container is approximately 20 tons of HDPE sheet, depending on thickness.

What documentation is needed to clear customs for these goods?

Customs clearance generally requires a commercial invoice, packing list, bill of lading, and any applicable certificates such as REACH registration, ISO 9001, and material safety data sheets (MSDS).