About STAR HOKU LLC - Mixed Commodity Supplier in United States

Based in the state of Hawaii, United States, STAR HOKU LLC lists 19 active products in its catalogue. The portfolio spans agricultural commodities such as Jasmine rice (HS 1006.20), Canadian lobster (HS 1605.30), kidney beans (HS 0713.39), corn oil (HS 1507.90), mung dal (HS 0713.31), chickpeas (HS 0713.30), dried brown lentils (HS 0713.40) and organic dehydrated ginger (HS 0910.11). Metal and alloy offerings include deformed steel bars (HS 7214.20), carbon steel bars (HS 7207.19), steel billets (HS 7207.11), various aluminium scrap grades (HS 7602.00) and cast‑iron compressor scrap (HS 45766). The catalogue also references paper (HS 978675) and iron bars (HS 7604.11).

The listed top categories comprise stainless steel bars, brass bars, aluminium bars, steel bars, iron bars, copper bars, steel structures and peas, reflecting a focus on both metal fabrication and food commodities. As an imported‑tier supplier, STAR HOKU LLC sources these items for export rather than domestic manufacturing. Each product entry is paired with its official HS code, enabling buyers to align customs documentation accurately. The mix of foodstuffs and metal scrap positions the company to serve buyers in construction, manufacturing, food processing and retail sectors. No specific certifications are claimed in the supplied data.

Product Range and Specialties of STAR HOKU LLC

The food segment includes long‑grain Jasmine rice, which is commonly graded by aroma intensity, moisture content below 14 % and broken grain under 5 %. Canadian lobster is usually shipped chilled or frozen, requiring a health certificate and traceability to the Atlantic fisheries. Legumes such as red kidney beans, mung beans, chickpeas and brown lentils are dried to moisture levels of 10‑12 % and are inspected for foreign matter and pesticide residues. Refined corn oil is typically specified with free fatty acid content below 0.1 % and a flash point above 200 °C. Organic ginger supplied in dehydrated form must meet USDA organic standards and a moisture content under 12 %.

The metal catalogue lists deformed steel bars conforming to HRB400/HRB500 or SD420/SD500 grades, with carbon content around 0.2‑0.3 % and yield strength between 400‑500 MPa as defined in ASTM A615. Carbon steel bars (HS 7207.19) are described with chemical limits of C ≤0.26 %, Mn 0.60‑1.20 % and Si 0.15‑0.35 % in line with EN 10025. Steel billets (HS 7207.11) are offered in the 5SP/PS semi‑killed to killed range, commonly used for rolling into bars or structural sections. Aluminium scrap grades 97‑99 % Al and 99.9 % pure 6063 alloy are standard feedstock for remelting, usually supplied in 1‑ton bundles with mill test certificates. Cast‑iron and steel compressor scrap (HS 45766) is classified as ferrous scrap suitable for secondary steelmaking.

Trade and Export Information - STAR HOKU LLC

Exporters of rice, legumes and vegetable oils from the United States typically ship to Asian, Middle Eastern and European markets, using 20‑ft containers for bulk grain (approximately 22 metric tonnes per container) and 40‑ft containers for oil drums. Fisheries products such as Canadian lobster are commonly consigned under refrigerated containers (40‑ft reefers) to high‑value markets in Japan, the EU and the United States Gulf Coast, and require a sanitary export certificate and compliance with FDA seafood regulations.

Metal products listed under HS 7207, 7214 and 7602 are usually exported to construction and manufacturing hubs in Southeast Asia, the Middle East and Africa. Buyers often request ISO 9001 quality‑management certificates, mill test reports and REACH compliance for alloy composition. Standard packaging includes steel coils, bundled bars on wooden pallets, and aluminium scrap in sealed steel drums or bulk bags, with typical incoterms of CIF or FOB.

Sourcing from STAR HOKU LLC - Buyer Guidance

When sourcing Jasmine rice or other legumes from STAR HOKU LLC, buyers should request a recent phytosanitary certificate, a moisture analysis report, and, for organic ginger, the USDA organic certification. Sample orders are typically limited to one 25‑kg bag for grain and a 5‑litre drum for oil, allowing verification of aroma, grain break and oil clarity.

For steel bars and aluminium scrap, buyers should obtain mill test certificates that detail chemical composition, tensile strength and heat‑treatment condition. Verify that the HS code on the commercial invoice matches the product description and that the shipment includes a third‑party inspection report (e.g., SGS or Bureau Veritas). Standard minimum order quantities are 5 metric tonnes for steel bars and 2 metric tonnes for aluminium scrap, with lead times of 30‑45 days from order confirmation.

What HS code should I reference when ordering Jasmine rice from STAR HOKU LLC?

Jasmine rice is listed under HS code 1006.20, which covers milled or husked long‑grain rice. Ensure the commercial invoice uses this code for customs clearance.

Which certifications are typically required for importing Canadian lobster?

Importers normally need a health certificate issued by the Canadian Food Inspection Agency, a copy of the FDA prior notice, and a catch‑area verification for shipments under HS 1605.30.

What are the standard specifications for deformed steel bars supplied by STAR HOKU LLC?

The deformed bars conform to HRB400/HRB500 or SD420/SD500 grades, with yield strength of 400‑500 MPa, rib pattern as per ASTM A615, and carbon content around 0.2‑0.3 %.

How is aluminium scrap purity verified before shipment?

Purity is confirmed by a mill test certificate that includes a chemical analysis showing 97‑99 % Al for generic scrap or 99.9 % Al for 6063 alloy. An independent assay laboratory often validates the results.

What packaging is used for bulk corn oil exports?

Corn oil is typically packed in 200‑litre food‑grade steel drums or 25‑kg bulk bags, sealed with tamper‑evident caps and clearly labelled with HS code 1507.90.

What are the typical lead times and MOQ for steel billets (HS 7207.11)?

Minimum order quantities are usually 5 metric tonnes, with a production and delivery lead time of 30‑45 days after receipt of a confirmed purchase order.

Which documents should I request for aluminium scrap shipments?

Request a mill test certificate, a REACH compliance statement and a third‑party inspection report; the commercial invoice should list HS code 7602.00 and the exact alloy designation.