About Shijiazhuang Huatao Import And Export Co., Ltd. - Industrial Machinery Supplier in China

China‑based Shijiazhuang Huatao Import And Export Co., Ltd. lists 24 active products across industrial machinery, packaging machinery, insulation panels, industrial belts, air fresheners, adhesive tape, insulation paper and wire mesh. The catalogue includes aerogel blankets, corrugator belts and rolls, spray humidifiers, roll stands, single facers, auto splicers, glue machines, automatic stackers, NC cut‑off machines and slitter blades. Each entry is identified by its product name, and two items carry explicit HS codes: the spray humidifier (HS 8415.80) and a second humidifier model (HS 8479.89).

The product set reflects typical Chinese export groups for high‑performance insulation and packaging line equipment. Aerogel blankets are classified under the broader HS chapter 84 for machinery, while the spray humidifiers fall under HS 8415 for air‑conditioning and refrigeration equipment. The belt and roll items belong to HS 8421 for machinery parts, and the glue and stacker machines align with HS 8479 for other machines. The catalogue therefore spans HS code families 8415, 8421, 8479 and related sub‑headings, providing a clear view of the product mix available for international buyers.

Product Range and Specialties of Shijiazhuang Huatao Import And Export Co., Ltd.

The catalogue offers several aerogel blanket variants, including HT200, HT650 and versions with adhesive tape or fiberglass cloth. In the insulation market, aerogel blankets are valued for low thermal conductivity (typically 0.018‑0.025 W/m·K) and high compressive strength, with thicknesses ranging from 10 mm to 30 mm. Buyers also encounter industrial belts such as corrugator belts and rolls, which are commonly specified by width (usually 1000‑1500 mm), tensile strength (≈ 150‑250 N/mm²) and surface finish for paper‑board processing. Packaging machinery items like roll stands, single facers and auto splicers are standard in corrugated board lines; typical specifications include motor power (1.5‑5 kW), frame material (cold‑rolled steel) and modular design for quick change‑over. Spray humidifiers listed with stainless‑steel 304 housing and brass fittings are used in industrial drying and climate‑control applications, where flow rates of 5‑20 m³/h and water‑tank capacities of 5‑15 L are common.

Trade and Export Information - Shijiazhuang Huatao Import And Export Co., Ltd.

China remains a major exporter of insulation panels and industrial packaging equipment, supplying Europe, North America and the Middle East where construction efficiency and packaging automation demand high‑performance materials. Aerogel blankets from China typically require compliance with CE marking for the EU and UL listing for North America; buyers also look for ISO 9001 quality‑management certification from the supplier. Spray humidifiers are classified under HS 8415.80 and are subject to EMC and safety testing under IEC 60335‑2‑80 when destined for the EU market. Machinery such as corrugator belts, roll stands and auto splicers fall under HS 8421 and often need a Declaration of Conformity (DoC) and test reports for mechanical safety (EN 12420). Standard export logistics involve 20‑ft or 40‑ft containers, wood palletisation to ISPM 15 standards, and Incoterms such as FOB Tianjin or CIF Shanghai, depending on buyer preference.

Sourcing from Shijiazhuang Huatao Import And Export Co., Ltd. - Buyer Guidance

When sourcing aerogel blankets, request a thermal‑conductivity test report (ASTM C518) and a fire‑resistance classification (e.g., Euroclass B‑s2, d0). Verify the material data sheet for the adhesive layer if the blanket includes tape, and ask for a batch‑level certificate of compliance with ISO 14001 for environmental management. For belts and rolls, obtain tensile‑strength test data (ISO 527) and a wear‑resistance report (ISO 868). Humidifier buyers should ask for flow‑rate curves, power consumption figures (W), and a CE or UL safety certification, together with a material safety data sheet for the polymer spray nozzles. For all machinery, request a recent factory audit report, a copy of the supplier’s ISO 9001 certificate and a detailed packing list specifying container dimensions and pallet configuration. Verifying these documents before order confirmation reduces risk of non‑conformity at import.

What are the typical thermal properties of the HT200 aerogel blanket?

The HT200 aerogel blanket is commonly specified with a thermal conductivity of about 0.018 W/m·K and a density near 120 kg/m³, suitable for cold‑storage insulation.

Which HS code applies to the Huatao spray humidifier?

The Huatao spray humidifier is listed under HS code 8479.89, which covers other specialised machinery not elsewhere specified.

What material standards should I check for the corrugator belts?

Corrugator belts are usually made of reinforced rubber or polymer composites; buyers should request tensile‑strength data (ISO 527) and a heat‑resistance rating, typically up to 120 °C.

Are CE or UL certifications required for the industrial glue machines?

For export to the EU, CE marking is generally required, while North American buyers often request UL certification; ask the supplier to provide the relevant test reports.

What is the typical container size for shipping the aerogel blankets?

Aerogel blankets are packed in 20‑ft or 40‑ft containers on ISPM 15‑treated wood pallets, with each pallet holding up to 12 rolls depending on thickness.

How can I verify the safety of the spray humidifier’s stainless‑steel housing?

Request an IEC 60335‑2‑80 compliance report and a material safety data sheet confirming the use of stainless‑steel 304, which meets corrosion‑resistance standards for industrial humidifiers.

What is the standard lead time for the Huatao NC cut‑off machine?

Lead times for the NC cut‑off machine typically range from 30 to 45 days after order confirmation, depending on configuration and tooling requirements.

Which documents should I ask for before placing a bulk order of slitter blades?

Ask for a product test certificate showing hardness (Rockwell C 55‑60), edge‑sharpness measurement, and a compliance statement with ISO 9001 quality‑management system.