About Selenes Kimya - Glues & Adhesives Supplier in Turkey

Selenes Kimya operates from Turkey and currently lists five distinct adhesive products in its catalogue. The company classifies its offerings under the broader categories of Glues & Adhesives, Adhesive, Sealants & Lubricants, and Construction Chemicals. Its product list includes Automatic machine selefan glue, A2 glue, Acrilic water based dispersion adhesive, A1 glue, and Messepol SVM 250. Each item is positioned for industrial bonding, sealing, or construction applications. The catalogue reflects a focus on polymer‑based and water‑based adhesive technologies.

The five products cover both solvent‑based and water‑based chemistries, ranging from ready‑to‑use glues for manual application to bulk formulations intended for automatic dispensing equipment. The Automatic machine selefan glue is described for use in high‑speed assembly lines, while the A1 and A2 glues target general purpose bonding in construction and manufacturing. The Acrilic water based dispersion adhesive provides a low‑VOC alternative for wood, panel, and flooring substrates. Messepol SVM 250 is positioned as a construction chemical, likely a sealant or mortar additive. No additional product specifications such as solids content or viscosity are supplied in the source data.

Product Range and Specialties of Selenes Kimya

The catalogue shows two manually applied glues (A1 glue, A2 glue), an automatic‑machine glue (Automatic machine selefan glue), a water‑based acrylic dispersion adhesive, and a construction‑chemical product (Messepol SVM 250). In the adhesive market, manual glues are often supplied in 20 kg drums or 200 L pails with solids content between 45 % and 65 % and viscosity measured in mPa·s. Automatic‑machine glues are typically formulated for low‑viscosity flow, with polymer solids above 55 % to ensure rapid set‑off on high‑speed lines. Water‑based acrylic dispersions usually have a pH near neutral (6.5‑7.5) and a dry film thickness of 30‑70 µm after curing. Construction chemicals such as sealants or mortar additives are commonly supplied in 25 kg bags or 200 L containers and may contain polymer modifiers to improve adhesion and flexibility.

Industry standards for these product types include ISO 9001 quality management, REACH registration for chemical safety, and, for construction adhesives, compliance with EN 1504‑2 (product standards for construction products). Typical grades for acrylic dispersion adhesives are identified by solids percentage (e.g., 50 % solids) and shear strength (e.g., 1.5 MPa on wood). Manual glues are often classified by open‑time (minutes) and tensile shear strength (e.g., 0.8‑1.2 MPa). These benchmarks help buyers compare the five items listed by Selenes Kimya against common market specifications.

Trade and Export Information - Selenes Kimya

Turkey ranks among the top European exporters of adhesives and construction chemicals, with the majority of shipments destined for EU member states, the Middle East, and North Africa. Buyers in automotive assembly, furniture manufacturing, and civil engineering frequently import products that fall under HS chapter 35 (chemical products). Export logistics for bulk adhesives usually involve 20‑foot or 40‑foot containers packed in sealed drums, with moisture‑resistant liners to meet transport regulations.

Typical import documentation for Turkish adhesive exporters includes a commercial invoice, packing list, certificate of origin, and a safety data sheet (SDS) that complies with EU CLP (Classification, Labelling and Packaging) requirements. Buyers often request proof of REACH registration or equivalent chemical compliance certificates, especially for water‑based formulations. Standard Incoterms for these goods are FOB Istanbul Port or CIF Mediterranean ports, reflecting the common trade routes for construction‑grade adhesives. Packaging is generally designed for bulk handling, with drums equipped with valve caps for safe discharge during unloading.

Sourcing from Selenes Kimya - Buyer Guidance

When evaluating Selenes Kimya’s adhesive line, buyers should request a technical data sheet that details solids content, viscosity, open‑time, and recommended substrate preparation. A safety data sheet covering hazard classification, storage conditions, and first‑aid measures is essential for compliance with workplace safety regulations. For the water‑based acrylic adhesive, a pH measurement and dry‑film thickness test report can confirm suitability for wood or panel applications.

Before placing a bulk order, verify that the supplier can provide REACH registration numbers or equivalent chemical compliance documentation, especially for products intended for the EU market. Request sample quantities in the same packaging format (e.g., 1 kg sachet or 5 L bucket) to perform shear‑strength and aging tests under the buyer’s own conditions. Confirm the minimum order quantity, typical lead time (often 4‑6 weeks for production runs), and the container type that will be used for shipment.

What types of adhesives does Selenes Kimya list in its catalogue?

The catalogue includes an automatic‑machine glue (selefan), two manual glues labeled A1 and A2, an acrylic water‑based dispersion adhesive, and a construction‑chemical product called Messepol SVM 250.

Are the listed adhesives suitable for high‑speed assembly lines?

The Automatic machine selefan glue is described for use with automatic dispensing equipment, which is typical for high‑speed assembly processes. Manual glues A1 and A2 are intended for hand application.

What documentation should a buyer request for the acrylic water‑based adhesive?

Buyers should ask for a technical data sheet showing solids content, viscosity, and pH, as well as a safety data sheet that meets EU CLP requirements. A sample test report for dry‑film thickness is also useful.

Which certifications are commonly required for Turkish adhesive exporters?

Importers usually request REACH registration, ISO 9001 quality‑management certification, and, for construction chemicals, compliance with EN 1504‑2. These can be verified with the supplier before finalizing the order.

What packaging formats are typical for the products listed by Selenes Kimya?

Bulk adhesives are commonly packed in 20 kg drums or 200 L pails, while construction chemicals may be supplied in 25 kg bags or 200 L containers. The catalogue does not specify packaging, so buyers should confirm the exact format.

What are the usual lead times and minimum order quantities for these adhesives?

Lead times for bulk adhesive production in Turkey are generally 4‑6 weeks, and minimum order quantities often start at one 20 kg drum or the equivalent volume for each product, but exact figures must be confirmed with the supplier.

Which regions typically import adhesives from Turkey?

European Union countries, Middle Eastern markets, and North African states are the main import destinations for Turkish adhesives and construction chemicals, reflecting regional demand for building and manufacturing supplies.

How should a buyer verify the quality of the A1 and A2 glues?

Request shear‑strength test results on standard substrates (e.g., wood or metal) and obtain a batch‑specific test report. Comparing the reported tensile shear values (often 0.8‑1.2 MPa) with industry benchmarks helps confirm suitability.