About Sanway International Trade Co., Ltd. - Motorcycles, Scooters & ATV Bikes Supplier in China

Sanway International Trade Co., Ltd. is based in China and currently lists five active products across three broad categories: motorcycles and scooters, agricultural equipment, and batteries & chargers. The catalogue includes two electric two‑wheelers, a 50 cc mini‑ATV, a snow‑thrower, and a vehicle charger, reflecting a diversified product set that targets both consumer and light‑commercial markets. Each entry aligns with its respective HS‑code family - for example the car charger falls under HS 8504.40, which covers static electricity generators and chargers. The supplier’s trust tier is listed as “harbor,” indicating a moderate level of verification within trade platforms.

The listed products are: “EEC&COC scooter maple 50-2”, an electric scooter model; “Snow thrower”, a small‑scale snow‑removal machine; “Car charger” with a steel housing, copper wiring and electronic components (HS 8504.40); “Electric scooter 1500‑TD”, another electric two‑wheel vehicle; and “50CC MIN ATV”, a low‑displacement off‑road bike. These items span HS chapters 87 (vehicles) and 85 (electrical equipment), providing buyers with clear tariff references for customs clearance.

Product Range and Specialties of Sanway International Trade Co., Ltd.

The scooter models in the catalogue typically belong to the 50‑250 cc electric segment, where manufacturers often specify motor power between 1 kW and 3 kW, battery voltages of 36 V or 48 V, and range figures of 20‑40 km per charge. Industry standards such as IEC 61851 for electric vehicle charging and ECE‑R‑21 for noise and emissions are common benchmarks. The 50 cc mini‑ATV aligns with light‑utility ATVs that usually feature air‑cooled single‑cylinder engines, a wheelbase around 900 mm, and a maximum payload of 150 kg. Snow throwers exported from China are generally rated between 2 kW and 4 kW, with auger widths of 250‑350 mm and a recommended operating temperature down to - 20 °C. The car charger listed with a steel housing and copper wiring conforms to the typical static charger design that delivers 10 A‑15 A output, incorporates over‑current protection, and complies with IEC 60950 safety requirements.

Trade and Export Information - Sanway International Trade Co., Ltd.

China is one of the world’s largest exporters of two‑wheel electric mobility devices, agricultural power tools, and electronic chargers. Main import destinations for these categories include the European Union, the United States, Southeast Asian economies such as Vietnam and Thailand, and the Middle East. HS chapter 87 covers motorcycles, scooters and ATVs, while HS 8424 applies to snow‑throwers and HS 8504 to chargers; customs authorities often request CE marking for EU shipments and FCC or UL reports for North American markets. Buyers normally request test certificates such as ISO 9001 for quality management, CE conformity for vehicle components, and UN 38.3 for any lithium‑based battery packs that may be integrated. Typical packaging consists of wooden crates or reinforced pallets, sized for 20‑foot and 40‑foot containers, with moisture‑resistant liners for electronic components. Common Incoterms used by Chinese exporters are FOB Shanghai or CIF Hong Kong, allowing buyers to arrange inland freight or door‑to‑door delivery as needed.

Sourcing from Sanway International Trade Co., Ltd. - Buyer Guidance

When sourcing the electric scooters or the mini‑ATV, request the full technical data sheet, including motor power (kW), battery capacity (Ah), voltage, weight, and any CE or ECE certification numbers. For the snow thrower, ask for performance curves that show power consumption at different snow depths, as well as an EN‑ISO 12125 compliance statement. The car charger should be accompanied by an IEC 60950 safety test report, a RoHS declaration, and a material safety data sheet confirming the steel housing and copper conductors. Verify that the HS codes provided in the catalogue match the physical product specifications before finalising the purchase order. Typical minimum order quantities for these items range from 50 units for scooters to 200 units for chargers, with lead times of 30‑45 days after order confirmation, subject to component availability.

What HS codes apply to the products listed by Sanway International Trade Co., Ltd.?

The car charger is classified under HS 8504.40 (static electricity generators and chargers). The electric scooters and the 50 cc mini‑ATV fall under HS 8711 (motorcycles) and HS 8701 (ATVs) respectively, while the snow thrower is covered by HS 8424 (snow‑removal machinery).

Which certifications should a buyer request for the electric scooters?

Buyers should ask for CE marking documentation, IEC 61851 compliance for the electric drive system, and any applicable battery safety test reports such as UN 38.3. A product data sheet with motor power and battery specifications is also standard.

Are there typical packaging standards for the car charger?

Car chargers are usually packed in reinforced cardboard boxes with internal cushioning, placed on wooden pallets. Export shipments often use 20‑foot or 40‑foot containers, sealed with moisture‑resistant liners to protect the steel housing and electronic components.

What is the usual lead time for the snow thrower?

Suppliers in China generally require 30‑45 days from order confirmation to ship a snow thrower, depending on the availability of the electric motor and auger components.

Which markets commonly import Chinese agricultural equipment like the snow thrower?

Key import markets include the United States, Canada, Germany, the United Kingdom, and several Southeast Asian countries. Importers often look for EN‑ISO 12125 compliance and CE marking for safety.

What documentation is needed to clear customs for the 50 cc mini ATV?

Customs clearance typically requires the commercial invoice, packing list, HS code declaration (HS 8701), and any applicable CE or ECE certification. A test report showing emissions and noise levels may also be requested by EU authorities.

What are the standard MOQ and payment terms for the car charger?

A common minimum order quantity for chargers is around 200 units. Buyers usually negotiate payment via a letter of credit (L/C) at sight or a 30 % deposit with balance payable against shipping documents.

How can a buyer verify the material composition of the car charger?

Request the material safety data sheet (MSDS) and a RoHS compliance certificate, which detail the steel housing, copper wiring, and any hazardous substance limits.