Rishika Imports And Exports

India‑based Rishika Imports And Exports lists ten active product lines across metal alloys, scrap, edible nuts and oil. The catalogue includes two manganese alloys (Silico Manganese and Silicon Manganese) under HS chapter 72.02.30, Aluminum Scrap (HS 76.02.00), Stainless Steel 304 (HS 72.04.21), Silicon Metal Powder (HS 28.04.69), Crude Palm Oil, Copper Cathode 99.995 % (HS 74.03.11) and Copper Millberry Scrap 99.9 % minimum (HS 74.04.00). Additional entries are Cashew Nuts and a specific grade labeled “Cashew Nuts W 320” without HS codes. The product list reflects a focus on primary metal commodities and agricultural raw materials rather than processed goods.

The listed manganese products are ferro‑silico‑manganese alloys typically containing 65‑75 % Mn and 15‑30 % Si, and a ferro‑silicon‑manganese variant used in steel deoxidation. In the global market these alloys are graded by manganese content (e.g., FeSiMn 65, 70, 75) and silicon content, with specifications for impurity limits such as Al < 0.01 % and Cu < 0.02 %. Aluminum scrap is offered in mixed forms (wire rope, beverage cans, engine parts, radiators) that are usually classified by grade (e.g., 2B, 2C) and measured in tonnes per container. Stainless steel 304 is an austenitic grade defined by 18 % Cr and 8 % Ni, commonly supplied in coils or sheets with thicknesses from 0.5 mm to 5 mm. Silicon metal powder is described with purity between 98.5 % and 99.99 %, a range that aligns with industry grades used in silicones and solar cell production. Crude palm oil (CPO) is traded as a bulk commodity with typical free fatty acid (FFA) values below 5 % and moisture under 0.1 %. Copper cathode at 99.995 % purity matches the standard electrolytic grade required for electrical applications, while millberry scrap at ≥99.9 % Cu is a high‑grade secondary copper feedstock. The cashew entries are raw kernels, with the “W 320” label likely indicating a size or grade used by processors.