About Prompt International - Kraft Paper Supplier in India

Prompt International is based in India and lists eight active products across its catalogue. The portfolio includes items classified under Kraft Paper, Agriculture, Packaging Items & Containers, and Plastic Items. Within the Kraft Paper segment the supplier offers rolls for high‑pressure laminate (HPL), corrugated and flute varieties. The plastic line comprises 400 ml and 600 ml shakers, square lockable containers, and food buckets designed for bulk handling. All items are identified by their generic product names without further specification in the provided data. These goods fall under the paper (HS chapter 48) and plastic (HS chapter 39) tariff sections commonly used in international trade.

The Kraft Paper rolls are described for use in high‑pressure laminate production and general corrugated applications. Plastic shakers and containers are sized for 400 ml and 600 ml volumes, suitable for food‑service and bulk storage. The catalogue does not detail material grades, certifications, or dimensions beyond the stated capacities. Potential buyers should note that the product set reflects typical Indian manufacturers supplying to regional packaging and food processing markets. No explicit export destinations are listed, but the product mix aligns with demand in South Asian and Middle‑Eastern import markets.

Product Range and Specialties of Prompt International

Kraft paper rolls for HPL are usually supplied in grammages from 80 g/m² to 120 g/m², with moisture content below 12 % as measured by ISO 536. Corrugated Kraft rolls often feature flute types A, B or C and board thickness between 3 mm and 5 mm, meeting standard tensile‑strength requirements of 30‑45 N/15 mm. Flute paper rolls serve as liners in double‑wall corrugated board and are commonly tested for burst strength and stiffness according to ISO 536 specifications.

Plastic shakers of 400 ml and 600 ml capacity are typically manufactured from HDPE or PET, providing a melt‑flow index of 5‑15 g/10 min and complying with FDA 21 CFR 177 food‑contact requirements. Square lockable containers and food buckets are usually produced in HDPE with wall thickness of 1‑3 mm and feature snap‑fit lids that meet ASTM D‑3350 impact‑resistance criteria. Standard packaging for these items includes bulk cardboard cartons or reusable plastic pallets, allowing efficient loading into 20‑ft or 40‑ft containers.

Trade and Export Information - Prompt International

India exports Kraft paper primarily to Southeast Asian, Middle Eastern and African markets, where the material is used for laminate flooring, packaging and interior construction. These shipments fall under HS chapter 48 (paper and paperboard), often classified with HS 4802 for kraft paper, which may require phytosanitary certificates for certain destinations. Plastic packaging items such as shakers and containers are classified under HS chapter 39, commonly HS 3924 for food‑grade containers, and buyers frequently request compliance with FDA or EU food‑contact regulations. Typical Incoterms used by Indian exporters include FOB Mumbai or CIF Dubai, with goods packed in 20‑ft or 40‑ft containers and secured with stretch film.

Importers generally ask for a Certificate of Origin, a Material Safety Data Sheet (MSDS) for plastic products, and a test report confirming basis weight and moisture for Kraft paper. Common certifications sought include ISO 9001 quality‑management certification and, for food‑contact plastics, compliance with EU Regulation 1935/2004. Lead times from Indian manufacturers range from 15 to 30 days after order confirmation, depending on order size and container availability.

Sourcing from Prompt International - Buyer Guidance

When sourcing Kraft paper rolls, buyers should request a sample to verify grammage, moisture content and tensile strength against ISO 536 specifications. A lab‑tested report showing basis weight (e.g., 100 g/m²) and moisture below 12 % helps confirm suitability for HPL production. For plastic shakers and containers, request a material declaration confirming HDPE or PET grade and an FDA food‑contact compliance certificate.

Typical minimum order quantities are one full 20‑ft container (approximately 1,200 kg of paper rolls or 2,000 units of plastic items), although some exporters may accommodate smaller pallets on request. Buyers should verify that packaging meets ISPM 15 standards for wooden pallets if used, and that outer cartons are rated for 1,000 kg stacking strength. Before finalizing, confirm the Incoterm, vessel schedule and that the supplier can provide a commercial invoice, packing list and certificate of origin aligned with the buyer’s customs requirements.

What product categories does Prompt International list?

The supplier lists items under Kraft Paper, Agriculture, Packaging Items & Containers and Plastic Items, including various Kraft paper rolls and plastic shakers, lockable containers and food buckets.

Are the Kraft Paper rolls suitable for high‑pressure laminate production?

The catalogue specifies Kraft Paper rolls for High Pressure Laminate (HPL). Buyers should verify the paper’s grammage (typically 80‑120 g/m²) and moisture content (<12 %) to ensure compatibility with HPL processes.

What material are the plastic shakers made from?

Plastic shakers of 400 ml and 600 ml capacity are commonly produced from HDPE or PET. These materials provide a melt‑flow index of 5‑15 g/10 min and can meet FDA food‑contact standards.

Which certifications are typically available for these products?

Exporters of Kraft paper and food‑grade plastics from India often hold ISO 9001 quality‑management certification. Food‑contact plastics may also carry FDA or EU food‑contact compliance certificates, while paper may be accompanied by a phytosanitary certificate where required.

What is the standard minimum order quantity and container size?

A typical MOQ is one full 20‑ft container, roughly 1,200 kg of paper rolls or about 2,000 units of plastic items. Smaller pallet loads may be negotiated but are not detailed in the provided data.

Which documents should a buyer request before shipment?

Buyers should request a commercial invoice, packing list, Certificate of Origin, Material Safety Data Sheet for plastic items, and a test report confirming basis weight and moisture for Kraft paper. Where applicable, a phytosanitary certificate or food‑contact compliance declaration is advisable.

What are the usual lead times for orders from Prompt International?

Lead times generally range from 15 to 30 days after order confirmation, depending on order size and container availability. Shipping is commonly arranged on FOB Mumbai or CIF terms to major regional ports.