About Nash Les - Pine Wood Supplier in Ukraine

Ukraine supplies five active wood product listings from Nash Les. The catalogue includes pine and linden wood panels, edge‑glued beams, linden wall lining, mouldings classified under HS code 4409.29 and ash steps 40 mm thick. The top categories reported are Pine Wood, Frames, Wood Panel, Dies & Mouldings and Wooden Products. Each entry specifies the material type, for example the mouldings are made from Linden (Tilia spp.) wood. The product set reflects typical secondary‑processing wood items used in construction and furniture sectors.

The five items cover raw dimensional timber (edge‑glued beams), processed panels (Fj Wood Panel pine, linden), interior wall cladding (Wood‑based Wall Linden Lining), decorative mouldings and prefabricated ash steps. HS code 4409.29 places the mouldings in the broader chapter 44 for wood products, while the other items fall under related sub‑headings for sawn timber and wood panels. The listings do not include additional certifications, leaving buyers to verify compliance with required standards.

Product Range and Specialties of Nash Les

Nash Les lists a Fj Wood Panel combining pine and linden, edge‑glued structural beams, a linden‑based wall lining, mouldings of linden wood (HS 4409.29) and 40 mm thick ash steps. In the broader industry, pine panels are commonly supplied in grades such as C18 or C24 with moisture content around 12 % and dimensional tolerances of ±2 mm. Linden panels used for interior lining typically target a moisture range of 8‑12 % and a density of 450‑550 kg/m³. Ash steps are often classified under hardwood specifications, with a typical hardness rating of 1.5 kN and a surface finish tolerance of 0.3 mm. Wooden mouldings in HS 4409.29 are usually produced to EN 13261 standards, with profile heights from 10 mm to 50 mm and surface smoothness measured in Ra ≤ 0.8 µm.

Trade and Export Information - Nash Les

Ukrainian wood exporters commonly ship to the European Union, the Middle East and Southeast Asian markets, where demand for pine panels, hardwood steps and decorative mouldings remains strong. All items fall under HS chapter 44, with sub‑headings for sawn timber (44 10‑44 19), wood panels (44 20‑44 29) and wood mouldings (44 09). Importers typically require phytosanitary certificates in line with ISPM 15, and many request chain‑of‑custody certification such as FSC or PEFC for sustainability compliance. Standard export packaging includes palletised bundles wrapped in breathable film, loaded into 20‑ft or 40‑ft containers, and treated wood packaging must bear the ISPM 15 heat‑treatment mark. Freight terms often use FOB or CIF, with customs clearance aligned to EU wood‑product regulations that reference the European Timber Regulation (EUTR).

Sourcing from Nash Les - Buyer Guidance

When sourcing from Nash Les, buyers should ask for a recent phytosanitary certificate and, if sustainability is required, request FSC or PEFC chain‑of‑custody documentation. Verify moisture content and dimensional specifications against the typical grades mentioned above; a moisture test report (e.g., oven‑dry method) and a certified dimensional inspection report are standard. Request a sample of each product type before confirming volume, and confirm that the mouldings meet EN 13261 tolerances and that ash steps are delivered with the specified thickness and hardness rating.

Which wood species are offered in the Nash Les catalogue?

The catalogue lists pine, linden (Tilia spp.) and ash as the primary species for panels, wall lining, mouldings and steps.

What HS codes apply to the listed products?

Mouldings are recorded under HS 4409.29. The remaining items fall under related HS 44xx sub‑headings for sawn timber and wood panels, such as 4401‑4403 for sawn pine and 4402 for processed wood panels.

What typical moisture content and density should buyers expect?

Pine and linden panels are usually shipped with moisture content between 10 % and 12 % and a density of 450‑550 kg/m³. Ash steps are commonly delivered at 8‑10 % moisture and a hardness rating around 1.5 kN.

Which certifications are commonly required for these Ukrainian wood products?

Importers often request phytosanitary certificates, ISPM 15 treatment marks on packaging, and, where sustainability is a concern, FSC or PEFC chain‑of‑custody certificates.

How are the products packaged for international shipment?

Products are typically palletised, wrapped in breathable film, and loaded into standard 20‑ft or 40‑ft containers. All wooden pallets must comply with ISPM 15 heat‑treatment requirements.

What are the usual lead times for orders from Nash Les?

Lead times generally range from four to six weeks after order confirmation, depending on product type, required certifications and export clearance procedures.

What documentation should a buyer request before finalising a purchase?

Buyers should obtain a phytosanitary certificate, moisture content test report, dimensional inspection report, and, if needed, FSC/PEFC chain‑of‑custody documentation.

Are there minimum order quantities for the listed items?

Typical minimum order quantities are 1 m³ for panels and wall lining, 0.5 m³ for edge‑glued beams, and 500 units for mouldings, but exact figures should be confirmed with the supplier.