About WOOD COUNTY PRIVATE LIMITED - Wooden Products Supplier in India

WOOD COUNTY PRIVATE LIMITED is based in Ahmedabad, Gujarat, India and currently lists five distinct wood‑based products in its catalogue. The listed items include a wooden flush door (HS 4418.20), jungle wood (HS 4407.29), boiling waterproof plywood (HS 4412.39), a wooden crate (HS 4415.10) and wooden dust derived from ash wood (HS 4401.39). Each entry specifies the primary material - ranging from solid tropical hardwood to pine timber and ash wood - and aligns with the HS chapter 44 family for timber and wood products.

The supplier’s catalogue focuses on both finished and semi‑finished wood items that are commonly used in furniture manufacturing, construction, and packaging applications. Products such as the flush door and plywood are classified under Indian Standard grades for hardwood and engineered wood, while the wooden crate conforms to typical timber packaging specifications. The wooden dust is a by‑product used in particle board or composite panels, matching standard moisture content limits of 12 % or lower for safe processing.

Product Range and Specialties of WOOD COUNTY PRIVATE LIMITED

The five products cover raw timber and processed wood goods. Jungle wood refers to solid tropical hardwood, which in trade is often graded by density and moisture content, with common export grades ranging from 0.6 to 0.9 g/cm³. The boiling waterproof plywood combines a hardwood core with phenol‑formaldehyde resin; industry standards such as ISO 12470 specify tensile strength of 20 MPa and water resistance measured by a boiling test of 24 hours. Wooden flush doors are typically manufactured to IS 2845 specifications, with panel thicknesses of 16 - 25 mm and surface‑finish grades A‑C. The wooden crate uses pine timber of various grades, generally meeting IS 1012 requirements for load‑bearing capacity (≈3 kN per board). Wooden dust, produced from ash wood, is graded by particle size (0.5 - 2 mm) and moisture content for use in composite panels.

Trade and Export Information - WOOD COUNTY PRIVATE LIMITED

India is a major exporter of timber and engineered wood products, and shipments under HS 44 series are routinely directed to the European Union, the United States, the Middle East and Southeast Asian markets. Buyers usually require phytosanitary certificates, FSC or PEFC sustainability verification, and compliance with the EU Timber Regulation (EUTR) for hardwoods such as jungle wood. Plywood and flush doors are often shipped in 20‑foot or 40‑foot containers with wooden pallets, protected by moisture‑resistant wrapping to meet ISPM 15 standards. The wooden crate and dust are commonly packed in bulk bags or wooden boxes, with weight limits of up to 1 ton per container pallet.

Sourcing from WOOD COUNTY PRIVATE LIMITED - Buyer Guidance

When sourcing wood products from this supplier, buyers should request detailed product data sheets that list dimensions, grade, moisture content (typically ≤12 %) and mechanical properties such as bending strength for plywood. Sample pieces or laboratory test reports for formaldehyde emission (CARB II or E1 limits) are standard for engineered wood. Buyers are advised to verify the presence of a phytosanitary certificate and, if sustainability is required, an FSC or PEFC chain‑of‑custody document before finalizing the order.

What wood products does WOOD COUNTY PRIVATE LIMITED offer?

The catalogue lists five items: a wooden flush door (HS 4418.20), jungle wood hardwood (HS 4407.29), boiling waterproof plywood (HS 4412.39), a pine‑timber wooden crate (HS 4415.10) and ash‑wood dust (HS 4401.39).

Which HS codes apply to the listed products?

The products fall under HS chapter 44: 4418.20 for flush doors, 4407.29 for solid tropical hardwood, 4412.39 for waterproof plywood, 4415.10 for wooden crates, and 4401.39 for wood dust.

What quality standards are typical for the plywood offered?

Boiling waterproof plywood usually complies with ISO 12470, featuring a phenol‑formaldehyde resin core, tensile strength around 20 MPa and a 24‑hour boiling water resistance test.

Are sustainability certifications available for the hardwood?

The supplier does not list certifications in the provided facts; buyers should request FSC or PEFC certificates if sustainable sourcing is required.

What documentation is needed for import clearance?

Standard documents include a commercial invoice, packing list, phytosanitary certificate, and, where applicable, a sustainability certificate and test reports for formaldehyde emissions.

What are typical packaging and shipping methods?

Products are usually packed in wooden pallets or bulk bags, wrapped to control moisture, and shipped in 20‑ft or 40‑ft containers. ISPM 15 treatment is required for any wooden packaging.

What is the minimum order quantity (MOQ) for the wooden crate?

The catalogue does not specify an MOQ; buyers should confirm the required quantity with the supplier, noting that bulk orders are often shipped in standard container loads.

How can I request a sample or technical data sheet?

Buyers can contact the supplier directly to ask for a physical sample or a PDF data sheet that includes dimensions, grade, moisture content and any available test results.