About Metal Titanium Co., Ltd - Titanium Wire Supplier in China

Metal Titanium Co., Ltd is located in China and lists 73 active products across its catalogue. The company’s offerings cover titanium wire, powder, bar, plate and sheet, each classified under HS chapter 81.20 for titanium articles. Products include ASTM B863 Grade 1 0.3 mm wire (HS 8108.20) and acid‑washed Grade 1 wire (HS 8108.90), as well as Ti‑6Al‑4V alloy powder (HS 8108.20). The catalogue also contains medical‑grade titanium plates and bars meeting ASTM F67 and F136 specifications. All items specify material grades such as CP Ti Grade 1 (≥ 99.5 % Ti) or Ti‑6Al‑4V Grade 5.

The listing further details wire diameters from 0.1 mm to 6 mm in grades 1, 2 and 5, titanium plates in grades 1, 2 and 5, and powders ranging from standard to ELI (extra‑low‑interstitial) forms. HS codes used are 8108.20 for most pure titanium articles and 8108.90 for certain alloy or medical‑specific items. The product set includes both raw forms and finished medical components such as ASTM F67 Grade 2 plates. This breadth reflects the supplier’s focus on both industrial and medical titanium applications.

Product Range and Specialties of Metal Titanium Co., Ltd

The catalogue enumerates a variety of titanium wire products, including hot‑sale ASTM B863 Grade 1 0.3 mm wire, acid‑washed Grade 1 0.3 mm wire, low‑price 0.2 mm Grade 1 wire and polished Grade 2 wire ranging from 0.1 mm to 6 mm. Titanium plates are offered in medical grades such as ASTM F67 Grade 2, Grade 1, and Ti‑6Al‑4V (Grade 5) alloy plate, while bars are supplied in ASTM F67 and F136 forms. Powder offerings span standard Ti‑6Al‑4V (Grade 5), ELI (Grade 23) and medical‑grade variants. All items are assigned HS codes 8108.20 or 8108.90 according to material composition and intended use.

In the broader titanium market, commercially pure grades (CP Ti 1, 2, 3, 4) are typically required to meet a minimum 99.5 % titanium purity, with mechanical properties such as tensile strength ranging from 340 MPa (Grade 1) to 550 MPa (Grade 2). Ti‑6Al‑4V alloy (Grade 5) is the most common aerospace and medical alloy, offering tensile strength around 900 MPa and a Young’s modulus near 110 GPa. ELI powder is distinguished by lower interstitial content, delivering tighter control of oxygen and nitrogen for implantable devices. Wire diameters are commonly supplied in coils or spools with tolerance ±0.01 mm, and plates are shipped in cut‑to‑size sheets or blanks of standard thicknesses (2‑10 mm).

Trade and Export Information - Metal Titanium Co., Ltd

China is a leading exporter of titanium products, supplying aerospace, medical device and automotive sectors worldwide. HS chapter 81.08 (code 8108) covers all forms of titanium articles, with sub‑headings 8108.20 for pure titanium and 8108.90 for alloy or specially processed items. Typical import markets include the United States, Europe (Germany, Italy, UK) and Japan, where buyers often require compliance with ASTM standards (F67, F136, B863) and ISO‑9001 quality management. Export logistics frequently use 20‑ft or 40‑ft containers with vacuum‑sealed drums or pallets, and Incoterms such as FOB Shanghai or CIF Hong Kong are common for bulk shipments.

Buyers usually request mill test reports, chemical analysis certificates and, for medical applications, ISO 13485 or ASTM F67/F136 test data. Compliance with REACH and US ITAR may be required for aerospace end‑uses. Packaging standards call for moisture‑controlled environments to prevent oxidation, especially for fine wire and powder. Shipping of titanium powder often follows UN Class 4.2 regulations for combustible dust, with appropriate labeling and segregation from incompatible materials.

Sourcing from Metal Titanium Co., Ltd - Buyer Guidance

When sourcing from Metal Titanium Co., Ltd, request a current mill test report that details chemical composition, tensile strength and oxygen content for the specific grade (e.g., CP Ti 1, Ti‑6Al‑4V Grade 5). For medical‑grade plates, bars or wires, ask for ASTM F67 or F136 certification and, if applicable, ISO 13485 compliance documentation. Verify the HS code on the commercial invoice matches the product material (8108.20 for pure titanium, 8108.90 for alloy or medical‑specific items) to avoid customs delays.

Confirm the packaging format - coils for wire, drums for powder, and palletized sheets for plates - and ensure moisture barriers or inert gas flushing are used for powders. Request a sample batch with full test results before placing a larger order, and clarify the lead time, which typically ranges from 15 to 30 days for standard grades and up to 45 days for medical‑grade certifications. Establish the preferred Incoterm (e.g., FOB Shanghai) and verify that any required export licenses from Chinese authorities are in place.

What titanium grades are available in the wire product line?

The wire catalogue includes commercially pure Grade 1 (≥ 99.5 % Ti), Grade 2, and alloy Grade 5 (Ti‑6Al‑4V) with diameters from 0.1 mm to 6 mm, each assigned HS code 8108.20 or 8108.90 depending on the exact material.

Which standards apply to the medical‑grade titanium plates?

Medical plates are listed under ASTM F67 for commercially pure grades and ASTM F136 for Ti‑6Al‑4V alloy, with material specifications such as Grade 2 CP Ti or Grade 5 alloy, and are coded under HS 8108.90.

How is titanium powder classified for export?

All powder items use HS 8108.20 and are described as Ti‑6Al‑4V (Grade 5), Grade 23 ELI or medical‑grade variants, with typical particle size distributions specified by the buyer.

What documentation should a buyer request before ordering medical titanium products?

Buyers should ask for a mill test report, ASTM F67/F136 compliance certificates, and, where required, ISO 13485 or ISO 9001 quality system certificates.

Are there any special shipping requirements for titanium powder?

Yes, powder is usually shipped in sealed, moisture‑controlled drums, complying with UN Class 4.2 regulations for combustible dust, and must be labeled accordingly.

What are the typical lead times for standard versus medical‑grade titanium items?

Standard commercial grades (pure Ti 1, 2, or alloy Grade 5) generally ship within 15‑30 days, while medical‑grade items that need additional certification may require up to 45 days.

Which Incoterms are commonly used for shipments from China?

Exporters from China frequently use FOB Shanghai or CIF Hong Kong for bulk titanium shipments, allowing the buyer to arrange further freight and insurance as needed.