About Jinshan Titanium Industry Group - Titanium Products Supplier in China

Jinshan Titanium Industry Group is based in China and lists 21 distinct titanium‑related products in its catalogue. The supplier’s offerings span multiple HS‑code families, primarily 8108 for titanium articles, 8413 for pumps, 8481 for valves, 9021 for medical implants, and 7113 for jewellery. Products include titanium forgings, sheets, coils, pipe fittings, tubing, pumps, valves, impellers, anodes, mesh, baskets, fasteners, bars, wire, implants and jewellery, as well as nickel sheet, nickel rod bar and nitinol wire. Each entry specifies the material grade, such as commercially pure titanium Grade 2, Ti‑6Al‑4V (Grade 5) alloy, or nickel alloys N02200.

Within the titanium segment the catalogue differentiates between commercial‑pure grades (1‑4) and the aerospace alloy Ti‑6Al‑4V (Grade 5), and provides both flat (sheet, plate, coil) and round (wire, bar, tubing) forms. Additional product families cover specialized components such as pumps (HS 8413.60) and valves (HS 8481.80) produced from Grade 5 alloy, while medical‑grade implants reference Ti‑6Al‑4V ELI. The nickel line includes pure nickel sheet (HS 7506.20) and nickel rod bar (HS 7505.11) made from N02200 alloy, and a nickel‑titanium shape‑memory wire (HS 8108.90).

Product Range and Specialties of Jinshan Titanium Industry Group

The listed catalogue presents twenty‑one items across titanium, nickel and nickel‑titanium alloys. Titanium products range from forgings and sheet plate (HS 8108.20/90) to coil, pipe fittings, tubing and mesh, each supplied in standard grades such as CP Ti Grade 2 and Ti‑6Al‑4V Grade 5. Fasteners, bars and wire are offered in ASTM F67‑compliant dimensions, while pumps and valves follow ASTM B381 and ASTM B637 specifications respectively. Nickel sheet and rod bar are supplied in N02200 alloy meeting ASTM B466 requirements, and the nitinol wire aligns with typical shape‑memory compositions of approximately 55.8 % Ni and 44.2 % Ti.

In the global titanium market, CP Grade 2 typically exhibits a minimum tensile strength of 340 MPa and oxygen content below 0.2 %, whereas Ti‑6Al‑4V (Grade 5) is standardized to ASTM B381 with tensile strength around 950 MPa and a 6 %‑10 % aluminum, 4 %‑6 % vanadium composition. Sheet thicknesses are commonly supplied from 0.5 mm up to 25 mm, and coil widths from 300 mm to 1500 mm. Wire diameters usually range from 0.1 mm to 6 mm, with tensile values exceeding 800 MPa for Grade 5. Nickel alloys N02200 are used for corrosion‑resistant applications and are often certified to ISO 9001 and ASTM B466. Nitinol wires are graded by transformation temperature and exhibit superelastic strain up to 6‑8 %.

Trade and Export Information - Jinshan Titanium Industry Group

China ranks among the world’s largest exporters of titanium alloys, with shipments primarily destined for aerospace, automotive, chemical processing and medical device manufacturers in Europe, North America and Southeast Asia. The HS 8108 series covers most titanium articles, requiring customs documentation such as a commercial invoice, packing list and, where applicable, a Certificate of Origin. Buyers typically request mill test reports that reference ASTM or ISO standards, and for aerospace grades a compliance statement to AS9100 is common.

Export logistics for the listed items usually involve 20‑foot or 40‑foot containers packed in wooden crates, with moisture‑resistant liners for sheet and coil, and bulk bags for bars and wire. Standard Incoterms used by Chinese titanium exporters include FOB Shanghai or CIF destination port. Regulatory checks may include REACH registration for nickel products and FDA 21 CFR 820 compliance for medical implants, while jewellery (HS 7113.19) often requires hallmarking certification in the importing country.

Sourcing from Jinshan Titanium Industry Group - Buyer Guidance

Potential buyers should request the supplier’s mill test reports (MTR) that detail chemical composition, mechanical properties and heat‑treatment records for each grade. For aerospace‑grade Ti‑6Al‑4V, verify compliance with ASTM B381 and request an AS‑9100 or ISO 9001 certificate. Medical implants should be accompanied by FDA‑type 510(k) clearance documentation or CE‑Marking conformity evidence.

Before placing a large order, obtain a sample cut to the intended dimensions and conduct independent testing for tensile strength, elongation and corrosion resistance. Confirm the packaging method (e.g., double‑wall corrugated crates for sheet, bulk bags for wire) and clarify the minimum order quantity, which for custom‑cut titanium sheet often starts at one metric ton, while standard bars may be ordered in 500 kg increments. Clarify lead times, which for forged or machined components typically range from 4 to 8 weeks.

What product categories does Jinshan Titanium Industry Group offer?

The supplier lists titanium forgings, sheet plate, coil, pipe fittings, tubing, pumps, valves, impellers, anodes, mesh, baskets, fasteners, bars, wire, implants and jewellery, plus nickel sheet, nickel rod bar and nitinol wire, each identified with the appropriate HS code.

Which titanium grades are available for sheet and plate?

Both commercially pure Grade 2 (CP Ti) and the alloy Ti‑6Al‑4V (Grade 5) are offered for sheet and plate, conforming to ASTM B265 specifications.

How are the titanium pumps classified and what material is used?

Pumps are listed under HS 8413.60 and are manufactured from Ti‑6Al‑4V (Grade 5) alloy, typically meeting ASTM B381 pressure‑vessel requirements.

What certifications should a buyer request for aerospace‑grade titanium products?

Buyers should request an ISO 9001 or AS‑9100 quality‑management certificate, together with mill test reports that reference ASTM B381 for Grade 5 alloy.

Are the nickel products compliant with international standards?

The nickel sheet plate (HS 7506.20) and nickel rod bar (HS 7505.11) are produced from N02200 alloy and are commonly certified to ASTM B466 and ISO 9001.

What are typical packaging and shipping methods for the listed titanium items?

Flat products such as sheet, plate and coil are packed in wooden crates with moisture‑resistant liners; bars, wire and mesh are shipped in bulk bags or reinforced bundles, all loaded in 20‑ft or 40‑ft containers under FOB Shanghai or CIF terms.

What documentation is required for medical‑grade titanium implants?

Implants (HS 9021.10) should be accompanied by a mill test report, FDA 510(k) clearance or CE‑Marking evidence, and a material certificate showing Ti‑6Al‑4V ELI composition.

What is the typical lead time for custom‑cut titanium wire?

Custom‑cut titanium wire generally requires 4 to 6 weeks from order confirmation, depending on grade and diameter.