About Jinan Wangtebei Instrument And Equipment Co., Ltd. - Light & Medium Machinery Supplier in China

China‑based Jinan Wangtebei Instrument And Equipment Co., Ltd. lists 21 active products that belong to the light and medium machinery segment. The catalogue includes electronic and hydraulic universal testing machines with capacities from 10 kN up to 2 000 kN, concrete moisture meters, flexural and compression testers, torsion and abrasion equipment, as well as concrete rebar locators and pendulum skid testers. Each item falls under HS chapter 84 (machinery) or HS chapter 90 (measuring instruments), which are the standard tariff headings for such testing and inspection devices. The supplier’s product portfolio is concentrated on laboratory, construction‑site and industrial quality‑control applications.

The product list features a 20 kN electronic universal testing machine, a series of tensile machines ranging from 30 kN to 2 000 kN, hydraulic models up to 600 kN, and a 1000 Nm computerized torsion tester. Additional offerings include a DM200C concrete moisture meter, a ZBL‑R800 concrete rebar locator, a Bohme abrasion tester, and a Zc3‑a concrete test hammer. All models are described with their nominal load capacities, indicating that the supplier targets users who need precise load‑cell performance and automated data acquisition.

Product Range and Specialties of Jinan Wangtebei Instrument And Equipment Co., Ltd.

The catalogue’s universal testing machines are offered in both electronic and hydraulic versions, a common distinction in the testing‑equipment market. Buyers typically look for load‑cell accuracies of ±0.5 % of full scale, digital read‑outs with ASTM‑compatible software, and modular fixtures for tension, compression and flexure tests. Concrete moisture meters such as the DM200C usually operate in the 0‑100 % relative humidity range and comply with standards like ASTM C566. Abrasion testers and torsion machines follow IEC 60711 or ISO 6507 test methods, with torque capacities expressed in newton‑metres (e.g., 1 000 Nm). The rebar locator and test hammer are standard field tools for reinforcement detection and concrete strength assessment, respectively, and are typically calibrated to ISO 7500‑1.

Trade and Export Information - Jinan Wangtebei Instrument And Equipment Co., Ltd.

China exports testing and measuring equipment primarily to construction, automotive, aerospace and material‑research sectors in Southeast Asia, the Middle East, Europe and North America. HS‑code 8421 covers universal testing machines, while HS‑code 9025 includes concrete moisture meters and other measuring instruments; both codes are subject to standard customs documentation and may require CE or UL marking for European and North‑American markets. Export shipments are normally packed in reinforced wooden crates or metal pallets and loaded in 20‑ft or 40‑ft containers, with FOB Shanghai or Ningbo and CIF options frequently used. Chinese manufacturers of this equipment commonly hold ISO 9001 quality‑management certification, and buyers often request CE Declaration of Conformity, ISO 9001 certificates and calibration reports before finalizing contracts.

Sourcing from Jinan Wangtebei Instrument And Equipment Co., Ltd. - Buyer Guidance

When sourcing testing machines from this supplier, request the latest CE Declaration of Conformity and any ISO‑based quality‑system certificates to verify compliance with European and North‑American regulations. Ask for a calibrated load‑cell test report that shows accuracy, repeatability and environmental tolerance for the specific kN or Nm rating you intend to purchase. Verify the software version supports the relevant ASTM or ISO test standards and confirm that the supplier can provide spare parts and a 12‑month warranty on the load cell and electronic components.

What load capacities are available for the universal testing machines?

The supplier lists electronic universal testing machines from 10 kN up to 2000 kN and hydraulic models ranging from 30 kN to 2000 kN. Each model’s specification sheet includes the maximum load, load‑cell accuracy and optional fixtures.

Are calibration certificates provided with the concrete moisture meters?

Yes, the DM200C concrete moisture meter is supplied with a factory calibration certificate that references ASTM C566. Buyers can request an additional calibration check upon receipt.

Which standards apply to the torsion testing machines?

The 1000 Nm computerized torsion tester follows IEC 60711 and ISO 6507 test methods for torque and shear testing. Documentation typically includes compliance statements and software validation reports.

What packaging is used for the larger hydraulic tensile machines?

Large hydraulic tensile machines (e.g., 600 kN, 1000 kN, 2000 kN) are shipped in reinforced wooden crates with internal bracing and covered by moisture‑resistant padding. The crates are sized to fit standard 40‑ft containers.

Which certifications should a buyer verify before purchase?

Buyers should request CE Declaration of Conformity, ISO 9001 quality‑management certification and, where required, UL or IEC safety certifications. These documents confirm that the equipment meets international safety and performance standards.

What is the typical lead time for an order of a 300 kN hydraulic tensile machine?

Standard lead time for a 300 kN hydraulic tensile machine is 30‑45 days after receipt of a confirmed purchase order and required certification documents. Expedited production may be negotiated but will affect the delivery schedule.

Can the testing machines be customized with specific software modules?

The supplier offers optional software modules that support ASTM, ISO and JIS test standards. Customization requests are handled during the order quotation stage, with additional lead time for software integration.