About Jiangyin H-Fang Professional Manufacture Of Slewing Drive - Heavy Machinery Supplier in China

Jiangyin H-Fang Professional Manufacture Of Slewing Drive is located in Jiangyin, China and currently lists five distinct products. The catalogue includes a slewing drive, a slewing bearing, two variants of slewing drives for industry machinery, and a gearbox intended for solar trackers and other industrial equipment. All items fall under the Heavy Machinery category as indicated by the supplier’s top_categories field. The product titles suggest applications in rotating machinery and solar‑tracking systems. The supplier is classified as an imported tier with a harbor trust tier.

The five products are catalogued without specific HS codes, but they belong to HS chapter 84, which covers machinery and mechanical appliances. Within this chapter, slewing drives and related gear units are typically classified under sub‑heading 8425, while gearboxes for solar trackers often appear under 8483. Buyers of such equipment generally look for specifications such as torque capacity, load rating, gear ratio, and IP protection level. The supplier’s focus on industrial machinery aligns with common export flows of Chinese heavy equipment to construction, renewable‑energy, and material‑handling sectors worldwide. No additional company‑specific claims beyond the listed catalogue are provided.

Product Range and Specialties of Jiangyin H-Fang Professional Manufacture Of Slewing Drive

The catalogue’s slewing drive products are designed to transmit rotational power and support axial loads in large rotating structures. In the industry, slewing drives are offered in torque capacities ranging from 5 kNm to over 200 kNm, with gear ratios commonly between 1:10 and 1:100, and are fabricated from forged steel or high‑strength alloy for durability. Typical specifications include an IP54 or higher enclosure rating, a maximum speed of 5 rpm, and precision positioning accuracy of 0.1°. The slewing bearing listed is usually a tapered roller or angular contact type, rated for dynamic loads up to several hundred tonnes and featuring lubrication ports for maintenance.

The gearbox for solar trackers is a planetary or helical gear unit that converts motor speed to the required panel‑tilt movement. Standard solar‑tracker gearboxes are rated for low torque (up to 2 kNm), high efficiency (>95 %), and often meet IEC 61215 requirements for photovoltaic system components. They are typically sealed to IP65 to withstand outdoor exposure, and mounted on a steel housing with corrosion‑resistant coating. Buyers also expect dimensional data that fits standard tracker frames and a weight that allows installation on lightweight structures.

Trade and Export Information - Jiangyin H-Fang Professional Manufacture Of Slewing Drive

China is a major exporter of heavy‑machinery components, and products such as slewing drives and gearboxes are frequently shipped to Southeast Asia, the Middle East, Europe, and Africa for use in construction cranes, wind‑turbine yaw systems, and solar‑tracking installations. The relevant HS sub‑headings (8425 for slewing drives and 8483 for gear units) are subject to standard customs valuation and may require CE marking or IEC conformity for entry into the European Union, while Middle‑East importers often request ISO 9001 certification and a test report confirming torque and load capacities.

Export logistics for these items typically involve 20‑foot or 40‑foot containers with wooden crates or steel pallets, protected by moisture‑resistant wrapping. Incoterms such as FOB Jiangyin or CIF destination port are common, and buyers should verify that the supplier can provide a Certificate of Origin and any required inspection certificates from agencies like SGS or Bureau Veritas. While the supplier’s target markets are not listed, the general trade pattern for Chinese heavy‑machinery components aligns with demand from infrastructure and renewable‑energy projects worldwide.

Sourcing from Jiangyin H-Fang Professional Manufacture Of Slewing Drive - Buyer Guidance

When sourcing slewing drives from this supplier, request detailed product datasheets that specify torque rating, gear ratio, speed limit, bearing type, material grade (e.g., 45 CrMo steel), and IP protection class. Buyers should also ask for a third‑party test report confirming static and dynamic load performance, as well as a copy of any CE or IEC conformity certificates that the supplier holds.

For the solar‑tracker gearbox, obtain dimensional drawings, efficiency curves, and verification that the unit meets IEC 61215 or IEC 61400 standards if intended for wind‑turbine yaw applications. Confirm the packaging method (e.g., double‑wall wooden crate) and ask for a pre‑shipment inspection certificate. Minimum order quantities are typically defined per model and may range from a single unit for trial to full container loads, with lead times of 30‑45 days after order confirmation.

What product categories does Jiangyin H-Fang list?

The supplier lists five items: a slewing drive, a slewing bearing, two variants of industrial‑machinery slewing drives, and a gearbox for solar trackers and other industrial machines.

Which HS codes are applicable to these products?

Slewing drives and related gear units are generally classified under HS chapter 84, with sub‑heading 8425 for slewing drives and 8483 for gearboxes, though the catalogue does not specify exact codes.

What specifications should I verify for a slewing drive?

Key specifications include torque capacity (kNm), gear ratio, maximum speed (rpm), IP protection rating, material grade, and bearing load rating. Request a test report that documents these parameters.

Are any certifications required for importing these items?

Importers commonly require CE marking for EU markets, IEC conformity for solar‑tracker gearboxes, and ISO 9001 quality‑management certification. Buyers should ask the supplier to provide copies of any such certificates.

What packaging and shipping methods are typical for these heavy‑machinery components?

Products are usually packed in wooden crates or steel pallets, wrapped to protect against moisture, and shipped in 20‑ft or 40‑ft containers. FOB Jiangyin or CIF destination ports are standard Incoterms.

What is the usual lead time and minimum order quantity?

Lead times are generally 30‑45 days after order confirmation. Minimum order quantities depend on the model, ranging from a single unit for sampling to full container loads for bulk orders.

How can I request a sample or technical data?

Contact the supplier with the specific product name and request a datasheet, material test report, and, if needed, a functional sample. Include any required certification checks in the request.