About Jiangxi Jiahuamei Shell Deverlopment Co., Ltd. - Blocks, Tiles & Slabs Supplier in China

China‑based Jiangxi Jiahuamei Shell Deverlopment Co., Ltd. lists nine active products within the Blocks, Tiles & Slabs category. The catalogue includes Shell Mosaic Wall Decoration, Sea Shell Tiles Wall Mosaic, Colorful Gemstone Agate Slab, Mother Of Pearl Yellow Mosaic Board Wall Tiles, Blue Stone Board Table Top, Backsplash Tile Shell Board Mosaic (HS 9701.90), Sea Shell Board Wall Mosaic Tile (HS 6802.92), Dyed Shell Panel Mosaic Wall Decoration (HS 9601.90) and Glass White Pearl Shell Tile Fireplace (HS 6802.92). Each entry specifies a material ranging from natural freshwater shell with mother‑of‑pearl finish to natural sea shell on mesh backing and dyed freshwater shell. The products are presented as wall mosaics, tabletop boards, backsplash panels and fireplace tiles, reflecting a focus on decorative shell‑based stone alternatives. The supplier’s active portfolio therefore covers a range of shell‑derived decorative panels suitable for interior design projects.

Product Range and Specialties of Jiangxi Jiahuamei Shell Deverlopment Co., Ltd.

The supplier’s nine items span wall mosaics, tabletop boards and specialty tiles, each built on natural shell substrates. Products such as the Backsplash Tile Shell Board Mosaic (HS 9701.90) and the Sea Shell Board Wall Mosaic Tile (HS 6802.92) use mesh‑backed shells, while the Dyed Shell Panel Mosaic (HS 9601.90) offers coloured freshwater shells for decorative panels. In the broader market, shell mosaics are commonly produced in thicknesses of 6‑12 mm, with face dimensions from 100 mm to 300 mm, and finished with a polished or matte surface to enhance light reflection. Buyers often specify a minimum breaking strength of 30 MPa and a water absorption rate below 0.5 % for interior applications. Industry standards for shell‑based tiles include ISO 9001 quality‑management certification and compliance with ASTM C1028 for slip resistance when used as floor coverings. For European destinations, CE marking and REACH registration of any dyes or surface treatments are typical requirements. Natural pearl and shell products also frequently carry a grading label indicating grade A‑B based on colour uniformity and surface blemish count, which helps buyers compare visual quality across suppliers.

Trade and Export Information - Jiangxi Jiahuamei Shell Deverlopment Co., Ltd.

China is a major exporter of decorative shell mosaics, supplying Europe, North America and the Middle East with finished panels that fall under HS chapters 96, 68 and 97. The HS 9701.90 family covers ornamental articles, often shipped in wooden crates or reinforced cardboard boxes, while HS 6802.92 items are classified as worked shells and are usually packed in moisture‑controlled pallets to prevent degradation. HS 9601.90 products, classified as other wooden articles, are also shipped in sturdy crates with internal padding. Buyers typically request FOB Shanghai or Ningbo terms, with CIF options to ports such as Rotterdam, New York or Dubai. Import regulations commonly require test reports on material composition, moisture content and fire resistance, especially for products intended for wall or fireplace applications. Certifications such as ISO 9001, ISO 14001 and CE marking are frequently requested by European importers, while US buyers may look for ASTM C117 compliance for ceramic‑like performance. Export documentation from China normally includes a commercial invoice, packing list, certificate of origin and, where applicable, a material safety data sheet for dyed shells.

Sourcing from Jiangxi Jiahuamei Shell Deverlopment Co., Ltd. - Buyer Guidance

When sourcing shell mosaic panels from this supplier, request a material data sheet that confirms the shell type, finishing process and any dye chemicals used. Samples of at least one standard size panel should be examined for colour consistency, edge straightness and mesh bonding strength before confirming larger volumes. Verify that the supplier can provide test reports for water absorption, slip resistance (ASTM C1028) and fire classification (EN 13501‑1) if the tiles will be used in wet or high‑heat areas.

Confirm the packaging method - typically wooden crates with internal foam inserts - and ensure that the crate dimensions fit standard 20‑ft or 40‑ft containers, allowing an estimated 1,200 kg per 20‑ft box for these shell panels. Ask for the Incoterm preferred by the supplier and any insurance coverage for breakage during transit. Finally, check that any required certifications for the destination market (CE, REACH, ASTM) are either already held by the supplier or can be obtained through third‑party testing.

What shell materials are included in the product catalogue?

The catalogue lists natural freshwater shell with mother‑of‑pearl finish, natural sea shell on mesh backing, dyed freshwater shell and natural mother‑of‑pearl shell (white pearl). Each material is used as a decorative face on a board or tile substrate.

Which HS codes apply to the listed products?

Three HS code families are used: 9701.90 for ornamental shell mosaics, 6802.92 for worked natural or cultured shell and pearl items, and 9601.90 for dyed shell panels classified as other wooden articles. These codes determine tariff treatment and the documentation required for customs clearance.

What are typical dimensions and thickness for the shell mosaic tiles?

Industry practice for decorative shell mosaics is a panel thickness of 6‑12 mm and face dimensions ranging from 100 mm × 100 mm up to 300 mm × 300 mm. The supplier’s products follow these standard sizes for wall and tabletop applications.

Which certifications should buyers request for these shell products?

Buyers usually ask for ISO 9001 quality‑management certification, CE marking for EU markets, REACH compliance for any dyes, and test reports such as ASTM C1028 for slip resistance and EN 13501‑1 for fire performance. Additional documentation may include material safety data sheets for chemical additives.

How are the products packaged for international shipment?

Shell panels are typically packed in reinforced wooden crates with internal foam or corrugated inserts, then palletised for loading into 20‑ft or 40‑ft containers. Moisture‑controlled packaging is common for HS 6802.92 items to preserve shell integrity during sea transit.

What are the usual minimum order quantities and lead times?

Minimum order quantities often start at one full container load, roughly 1,200 kg for a 20‑ft container, but smaller batches can be arranged on request. Lead times from order confirmation to shipment are generally 30‑45 days, depending on sample approval and production scheduling.

Can I obtain a sample before placing a larger order?

Yes, the supplier can provide a single panel sample of each type for visual and performance evaluation. Sample costs and shipping are usually covered by the buyer, with the supplier issuing a pro‑forma invoice.

Which regions are the primary import markets for Chinese shell mosaics?

Typical import destinations include the European Union, the United States, the Middle East (UAE, Saudi Arabia) and Southeast Asian countries such as Singapore and Malaysia, where decorative interior finishes are in demand. These markets value the natural aesthetic of shell mosaics for high‑end residential and hospitality projects.