About J.C Electronic Industry & Trade Co., Ltd. - Light Emitting Diode Supplier in China

China‑based J.C Electronic Industry & Trade Co., Ltd. currently lists five active LED products in its catalogue. The company’s offerings are confined to the Light Emitting Diode category and include items such as LED White Dancing Floor, 5 Eyes LED RGBW 4‑in‑1 Moving Head Beam Light, and 8pcs × 3 W LED Effect Gobo Light. Power ratings range from low‑wattage effect modules to a 30 W spot unit combined with a 6 × 8 W wash array, and a 350 MW RGB Animation Laser Light that integrates LED and laser diodes for dynamic colour projection. Product titles indicate use in stage, club and event environments, with functions covering static colour fields, moving‑head beam effects and programmable floor lighting. No HS codes are provided in the catalogue, but the items fall under the usual HS chapters for lighting equipment.

Product Range and Specialties of J.C Electronic Industry & Trade Co., Ltd.

The catalogue comprises five distinct LED fixtures: a programmable white‑dancing floor panel, a 5‑eye RGBW moving‑head beam, an array of eight 3 W gobo LEDs, a 30 W spot head with an auxiliary 6 × 8 W wash module, and a high‑power 350 MW RGB animation laser light. In the LED lighting market, similar products are typically rated by luminous flux (lm), colour rendering index (CRI ≥ 80), colour temperature (for white LEDs often 5000‑6500 K), and IP protection level (IP20 for indoor effect lamps, IP65 for outdoor units). Industry standards such as IEC 60598‑2‑34 for LED luminaires, RoHS compliance for hazardous substances, and CE marking for European markets are commonly applied. Buyers often request data sheets that list drive current, power factor, and thermal management details, as well as photometric curves for beam angle and colour mixing performance. The product mix suggests the supplier can meet requirements for entertainment venues, temporary installations and indoor architectural lighting projects.

Trade and Export Information - J.C Electronic Industry & Trade Co., Ltd.

Exporters of LED stage and effect lighting from China usually serve markets in North America, Western Europe, the Middle East and Southeast Asia, where demand for programmable visual effects is strong. Typical HS code families for such equipment include Chapter 94 (Furniture; lamps and lighting fittings) and Chapter 85 (Electrical machinery), and customs authorities often require conformity certificates such as CE, UL, FCC or CB depending on the destination. Buyers generally expect packaging in sturdy cardboard boxes or wooden crates, with pallets for container loading; a 20 ft container can accommodate roughly 30‑40 medium‑size fixtures, while a 40 ft container holds up to 70‑80. Common Incoterms are FOB Shanghai or CIF Hong Kong, with freight forwarders handling temperature‑controlled handling for sensitive LED modules. Chinese exporters of LED lighting typically maintain quality control labs that perform EMC testing, thermal cycling and optical performance verification before shipment.

Sourcing from J.C Electronic Industry & Trade Co., Ltd. - Buyer Guidance

When sourcing LED effect and moving‑head fixtures from J.C Electronic Industry & Trade Co., Ltd., buyers should request the latest test reports covering IEC safety compliance, RoHS declaration and photometric data sheets. Verifying the supplied power rating, colour mixing matrix (RGBW ratios) and beam angle for each model helps confirm suitability for the intended venue. Samples of the LED modules or a short‑run prototype can reveal build quality, heat dissipation and colour consistency before committing to larger volumes. Buyers are advised to confirm that the supplier can provide CE or UL certificates on request, and to check that the packaging meets ISPM‑15 standards for wooden pallets when shipping to regions with phytosanitary regulations.

What LED product categories does J.C Electronic Industry & Trade Co., Ltd. list?

The supplier lists five LED products: a white dancing floor panel, a 5‑eye RGBW 4‑in‑1 moving‑head beam, an 8‑unit 3 W gobo effect light, a 30 W spot head with a 6 × 8 W wash module, and a 350 MW RGB animation laser light.

How many active LED items are in the catalogue?

The catalogue contains five active LED items, as indicated by the active_product_count field.

What power ratings are typical for the listed products?

Power ratings range from 3 W per module in the gobo set, to 30 W for the spot head, a combined 6 × 8 W wash array, and a high‑output 350 MW RGB laser unit.

Which certifications should a buyer request for these LED fixtures?

Buyers should ask for RoHS compliance, IEC safety test reports, and region‑specific marks such as CE for Europe, UL for the United States or FCC for radio‑frequency emissions, if applicable.

What packaging and shipping formats are common for these LED products?

Typical packaging includes reinforced cardboard boxes or wooden crates, stacked on Euro pallets for container loading; a 20 ft container usually fits 30‑40 medium‑size fixtures, while a 40 ft container can hold 70‑80.

What documentation is essential before placing an order?

Essential documents include a detailed data sheet with luminous flux, colour temperature, CRI, beam angle, an IEC‑60598‑2‑34 safety test report, and any applicable CE/UL certificates.

Which markets most often import LED stage lighting from China?

North America, Western Europe, the Middle East and Southeast Asian countries are the primary import markets for Chinese LED stage and effect lighting.

What are typical lead times for custom LED effect fixtures from this supplier?

Lead times commonly range from 4 to 8 weeks for standard models, with longer periods for custom colour programming or bespoke mechanical designs.