About IDP. Co. Ltd. - Transmission Parts Supplier in Taiwan

Taiwan, New Taipei City hosts IDP. Co. Ltd., which lists six active products in its catalogue. The catalogue includes a planetary gear design (HS 8483.40) made from hardened alloy steel such as 8620H, a small worm gearbox (HS 8483.40.10) with a carbon‑steel housing, a screw‑and‑nut set for transmissions (HS 7318.16) using glass‑filled nylon or POM, O‑rings (HS 4016.93) in NBR or FKM, stamped aluminum parts (HS 8708.40) of alloy 6061/5052, and motors (HS 8503.00) built from ferrous and non‑ferrous alloys. Each entry specifies the material family and the relevant HS‑code family, allowing buyers to match customs classifications directly. The supplier’s profile notes that all processes - from prototyping through tooling, injection molding and final assembly - are performed in‑house, which limits subcontracting steps. IDP. Co. Ltd. states that its gearboxes, pumps, AGV components and robot joints are intended for sectors such as medical equipment, automotive, education and robotics.

The company’s description emphasizes in‑house control of material selection and long‑term supplier relationships, which it claims supports consistent quality of transmission components. It highlights design capabilities for emerging Industry 4.0 applications, including arm‑joint gearboxes and AGV power rollers. The product list reflects a focus on mechanical power transmission parts rather than complete vehicle assemblies. No external certifications are listed, so buyers should verify compliance documentation separately. The six catalogue items cover both gear sets and ancillary parts such as O‑rings and stamped components, offering a modular approach to transmission system design.

Product Range and Specialties of IDP. Co. Ltd.

IDP. Co. Ltd.’s catalogue covers planetary gears, worm gearboxes, screw‑and‑nut transmission kits, sealing O‑rings, aluminum stamping parts and electric motors. In the gear sector, planetary gear sets are commonly supplied to ISO 6336 standards with hardness levels around 58‑62 HRC for alloy steels, while worm gearboxes often use bronze worm wheels and carbon‑steel shafts meeting DIN 3990 tolerances. Plastic transmission components such as glass‑filled nylon or POM typically meet ISO 527 tensile strength specifications of 70‑100 MPa. NBR and FKM O‑rings are usually graded by durometer (Shore A 70‑85) and compression set limits below 5 % at 100 °C. Aluminum stamping parts for automotive use are frequently produced from 6061‑T6 alloy, delivering a tensile strength near 310 MPa and are classified under HS 8708.40. Motors listed under HS 8503.00 are generally rated by power output (kW) and efficiency class (IE 3 or higher).

Trade and Export Information - IDP. Co. Ltd.

Taiwan is a major exporter of precision transmission components, with the majority of shipments destined for East Asian manufacturers, European automotive suppliers and North American robotics firms. HS 8483 covers gearboxes and gear units, which often require CE marking for EU markets and UL listing for the United States. O‑ring products under HS 4016 are subject to REACH registration in the EU and may need to comply with FDA 21 CFR 177 for medical‑grade elastomers. Aluminum stamping parts (HS 8708) typically follow ASTM B209 standards for alloy composition and may be inspected under ISO 9001 quality management. Motors (HS 8503) are frequently shipped in 20‑ft containers with anti‑corrosion packaging, and buyers often request test reports for voltage, torque and efficiency. Export documentation from Taiwan usually includes a commercial invoice, packing list, certificate of origin and, where required, a material safety data sheet (MSDS) for rubber or plastic parts.

Sourcing from IDP. Co. Ltd. - Buyer Guidance

When sourcing planetary gears or worm gearboxes from IDP. Co. Ltd., buyers should request material test certificates confirming alloy composition and hardness, as well as gear geometry inspection reports per ISO 1328. For plastic transmission kits, a melt flow index (MFI) report and moisture content analysis are standard verification items. O‑ring orders should be accompanied by a batch‑level durometer chart and a compression set test at the intended service temperature. Aluminum stamping parts benefit from a mill test report (MTR) showing alloy designation, temper condition and dimensional tolerance compliance. Motor specifications should be validated with a performance test report covering voltage, current draw, no‑load speed and torque curves. In all cases, obtaining a copy of the supplier’s ISO 9001 certificate - or confirming equivalent quality management - helps align with typical import requirements.

What transmission product categories are listed in IDP. Co. Ltd.’s catalogue?

The catalogue includes planetary gears, small worm gearboxes, screw‑and‑nut transmission kits, sealing O‑rings, aluminum stamping parts and electric motors, each identified with its HS‑code.

Which material is used for the planetary gear design?

The planetary gear is manufactured from hardened alloy steels such as 8620H, SCM415 or SNCM220, which provide typical hardness values of 58‑62 HRC.

What are the common standards for the O‑rings supplied by IDP. Co. Ltd.?

O‑rings are produced from NBR or FKM elastomers and are usually graded by Shore A durometer 70‑85, with compression‑set limits below 5 % at 100 °C, complying with ISO 2282.

How are the aluminum stamping parts classified for export?

They fall under HS 8708.40 and are typically made from aluminum alloys 6061 or 5052, which meet ASTM B209 specifications for tensile strength around 310 MPa.

What documentation should a buyer request for the electric motors?

Buyers should ask for a performance test report showing voltage, power rating, efficiency class (IE 3 or higher) and a material certification for the ferrous or non‑ferrous alloys used.

Which certifications are normally required for transmission components exported from Taiwan?

Exporters usually provide ISO 9001 quality‑management certificates, CE marking for EU gearboxes, REACH registration for rubber parts and, where applicable, UL or CSA listings for motors.

What packaging and shipping format is typical for these products?

Gear sets and motors are often packed in wooden crates with anti‑corrosion wraps, while O‑rings and plastic kits are placed in sealed poly‑bags; shipments commonly use 20‑ft or 40‑ft containers under CIF terms.

What HS‑code family does the small worm gearbox belong to?

The small worm gearbox is classified under HS 8483.40.10, the sub‑heading for gear units with worm gear arrangements.