About Hebei Jin Neng Power Technology Co., Ltd. - Industrial Gloves Supplier in China

China‑based Hebei Jin Neng Power Technology Co., Ltd. lists 77 active products spanning safety footwear, dielectric rubber sheets, high‑voltage insulating gloves, safety helmets, bird‑control devices and digital multimeters. The catalogue includes items such as 30 kV black dielectric boots, 35 kV red dielectric rubber sheets, 5 kV latex dielectric gloves and Fluke digital multimeters, each falling under typical HS‑code families for protective equipment (e.g., chapter 64 for safety footwear, chapter 40 for rubber gloves and sheets, chapter 90 for measuring instruments).

The supplier’s product mix reflects common Chinese export streams of industrial protective gear, with voltage‑rated dielectric items designed for electrical utilities and construction sites. While no specific certifications are listed, the items correspond to industry standards such as IEC 60903 for dielectric footwear, IEC 60903‑2 for gloves, and IEC 61010 for test equipment, which buyers normally verify before import.

Product Range and Specialties of Hebei Jin Neng Power Technology Co., Ltd.

The catalogue lists a variety of dielectric safety boots ranging from 6 kV to 35 kV, rubber sheets in thicknesses from 3 mm to 35 mm, and latex or rubber gloves rated from 5 kV to 30 kV. In the glove segment, products such as 5 kV latex dielectric gloves and 20 kV work insulating gloves align with typical IEC 60903 classifications that specify dielectric strength, tensile strength and resistance to oil or abrasion. The digital multimeter line (Fluke 116c, 87‑V, 289 cn, Unit 39a) falls under IEC 61010‑1 requirements for accuracy, safety category, and input impedance.

Trade and Export Information - Hebei Jin Neng Power Technology Co., Ltd.

Chinese manufacturers of safety footwear and dielectric gloves commonly ship to Southeast Asian construction markets, Middle‑East power utilities, African mining operations and European OEMs. HS chapter 64 (footwear) and chapter 40 (rubber products) are routinely inspected for compliance with CE marking or ISO 9001 quality systems, while HS chapter 90 (measuring instruments) often requires IEC 61010 test reports and a CE Declaration of Conformity. Export logistics typically use 20‑ft or 40‑ft containers with pallets wrapped in stretch film; Incoterms such as FOB Tianjin or CIF Shanghai are standard for these bulk protective goods.

Sourcing from Hebei Jin Neng Power Technology Co., Ltd. - Buyer Guidance

When sourcing dielectric boots or gloves from this supplier, request the IEC 60903 dielectric strength test report and, if available, an ISO 9001 quality‑management certificate. Verify the voltage rating printed on the product label matches the buyer’s system voltage and confirm the thickness of rubber sheets (e.g., 12 mm red sheet) against specification sheets. Buyers usually place a minimum order of 100 units for gloves and 50 pairs for boots, allowing a lead time of 4‑6 weeks after sample approval, with packaging on standard Euro pallets.

What voltage ratings are available for the dielectric safety boots?

The catalogue includes boots rated at 6 kV, 10 kV, 25 kV, 30 kV and 35 kV. Each rating corresponds to IEC 60903 dielectric strength specifications for footwear used in high‑voltage environments.

Are the rubber sheets suitable for electrical insulation?

Yes. The sheets are offered in 3 mm, 5 mm, 12 mm and 35 mm thicknesses and are described as dielectric rubber, which typically meets IEC 60903‑2 insulation standards for use as barrier material.

What standards should I request for the digital multimeters?

Buyers should ask for IEC 61010‑1 test reports, a CE Declaration of Conformity and, if needed, calibration certificates that state the device’s accuracy class (e.g., ±0.5 % for the Fluke 87‑V).

Which certifications are commonly required for the gloves?

Typical certifications include IEC 60903 dielectric strength, EN 388 abrasion resistance and, where applicable, ISO 9001 for the manufacturing process. Request copies of these test reports before placing an order.

What is the usual minimum order quantity for the latex dielectric gloves?

Suppliers of similar Chinese glove lines often set a MOQ of 100 pieces per size and voltage rating, which balances production batch size with shipping efficiency.

How are the products packaged for export?

Standard export packaging uses cardboard boxes placed on Euro pallets, wrapped in stretch film. For larger items such as safety boots, cartons are typically stacked in 20‑ft containers with a maximum gross weight of about 22 t.

What lead time can I expect after confirming a sample?

After sample approval, most items - boots, gloves, rubber sheets and multimeters - are produced within 4‑6 weeks, depending on the order size and any required custom labeling.