About Guney Celik - Steel Wires Supplier in Turkey

Turkey hosts a diversified steel wire sector, and Guney Celik lists five distinct wire products for export. The catalogue covers galvanized carbon steel wire, a zinc‑aluminum alloy wire (Zn95Al5), cable armouring wire, ACSR conductor wire, and high‑carbon steel wire, each classified under HS chapters 7217 or 7614 as indicated. The products are described with material specifications such as SAE1005‑1008 carbon steel cores, hot‑dip zinc coating, and primary zinc coating at 99.995% purity for the ACSR type. The supplier’s active product count of five reflects a focused portfolio within the broader steel wire market. Export listings reference the exact HS codes 7217.20 for most wires and 7614.90 for the ACSR conductor, aligning with customs classifications for steel products.

Guney Celik’s catalogue does not include additional wire grades beyond the five items, but each entry specifies the core steel grade, coating type, and basic composition. For example, the Arzincal wire combines a hot‑dip zinc‑aluminum coating with SAE1006‑1070 rod cores, while the cable armouring wire meets EN10244‑2 Class A standards for hot‑dip galvanizing. The ACSR wire pairs a galvanized steel core (SAE1045‑1070) with an aluminum conductor, a configuration common in overhead power transmission. High‑carbon steel wires are listed as containing more than 0.6 % carbon, a typical threshold for increased tensile strength. All items are presented without reference to certifications or production volumes.

Product Range and Specialties of Guney Celik

The product list includes galvanized wire (HS 7217.20) made from carbon steel with a hot‑dipped zinc coating, a Zn95Al5 alloy wire (HS 7217.20) using a zinc‑aluminum dip, cable armouring wire (HS 7217.10) of SAE1005‑1008 carbon steel galvanized to EN10244‑2 Class A, ACSR conductor wire (HS 7614.90) with a steel core and aluminum conductor, and high‑carbon steel wire (HS 7217.20) exceeding 0.6 % carbon. In the steel wire industry, galvanized wires are typically produced to meet ASTM A123 or EN 10346 specifications, with coating thickness ranging from 50 to 150 µm and tensile strengths of 400‑620 MPa depending on the carbon grade. Zinc‑aluminum coated wires (often referred to as Z‑Al or Galvalume) are evaluated against ASTM A901, offering corrosion resistance comparable to pure zinc while maintaining similar mechanical properties. Cable armouring wires are required to meet EN 10244‑2 Class A, which defines minimum tensile strength of 400 MPa and coating adherence. ACSR conductors follow IEC 60826, with aluminum strands typically of 99.5 % purity and steel cores meeting ASTM A615 standards. High‑carbon steel wires are commonly graded by carbon content and tensile strength, with grades such as 0.6‑0.8 % C delivering 600‑800 MPa tensile strength.

Industry practice shows buyers often request material test reports (MTR), coating thickness measurements, and tensile test certificates for each wire type. Standard packaging for these wires includes bundled coils on wooden pallets, suitable for 20‑ft or 40‑ft containers, with moisture‑resistant wrapping to preserve coating integrity during sea freight.

Trade and Export Information - Guney Celik

Turkey is a major exporter of steel wire products, with shipments typically destined for the European Union, the Middle East, North Africa, and parts of Southeast Asia. HS 7217 covers steel wire rod and bar, while HS 7614 pertains to insulated or coated conductors, both of which are subject to customs duties that vary by destination country. Buyers usually require compliance with ISO 9001 quality management systems and may request CE marking for products entering the EU market, although such certifications are not listed for Guney Celik. Commonly requested certificates for steel wire include ASTM A123 (galvanizing), ASTM A901 (Zn‑Al coating), and IEC 60826 for ACSR conductors. Export logistics often employ FOB Istanbul or DDP terms, with containers packed on pallets and secured with stretch film; the typical container load is 15‑18 metric tonnes for bundled wire coils.

Regulatory considerations include adherence to REACH restrictions on heavy metals for European buyers and compliance with the US ASTM A53 or AISI standards for structural steel wire. Turkish steel producers frequently undergo third‑party inspections by SGS or Bureau Veritas to verify coating thickness and tensile properties before shipment. Seasonal demand peaks in the construction and power transmission sectors, influencing lead times and container availability.

Sourcing from Guney Celik - Buyer Guidance

When sourcing from Guney Celik, buyers should request an up‑to‑date material test report that includes chemical composition, tensile strength, elongation, and coating thickness for each wire type. For the Zn95Al5 alloy wire, a zinc‑aluminum coating certification (ASTM A901) and a corrosion resistance test (salt spray) are typical verification points. Buyers of ACSR conductors should verify the aluminum strand purity (≥99.5 %) and the steel core grade, and request compliance documentation with IEC 60826. It is advisable to confirm the HS code used on the commercial invoice matches the product description to avoid customs discrepancies.

Typical minimum order quantities for bulk wire coils range from 1 tonne to 5 tonnes, depending on the wire diameter and coating. Lead times in the Turkish steel wire sector are usually 4‑6 weeks after order confirmation, with longer periods for custom diameters or special coating specifications. Packaging should be inspected for proper palletization, shrink‑wrap integrity, and correct labeling of HS code and country of origin before loading.

What steel grades are available for the galvanized wire listed by Guney Celik?

The galvanized wire is described as carbon steel with a hot‑dipped zinc coating, commonly produced to ASTM A123 or EN 10346 specifications, which cover grades such as SAE 1006‑1010 and tensile strengths between 400‑620 MPa.

Which certification should I ask for when purchasing the Zn95Al5 alloy wire?

Request the ASTM A901 certification that verifies the zinc‑aluminum coating composition and thickness, along with a material test report showing the underlying SAE 1006‑1070 steel grade.

How is the cable armouring wire coated and what standard does it follow?

The cable armouring wire is hot‑dip galvanized to EN 10244‑2 Class A, meaning it must meet a minimum coating thickness of 50 µm and a tensile strength of at least 400 MPa.

What are the typical specifications for ACSR conductors exported from Turkey?

ACSR conductors usually combine a galvanized steel core (SAE 1045‑1070) with an aluminum conductor of 99.5 % purity, conforming to IEC 60826, and the steel core is often coated with a primary zinc layer at 99.995 % purity.

What HS codes apply to the products offered by Guney Celik?

Four of the five products fall under HS 7217.20 (galvanized wire, Zn‑Al alloy wire, carbon steel wire) and one under HS 7217.10 (cable armouring wire); the ACSR conductor is classified under HS 7614.90.

What packaging and container options are typical for these steel wires?

Steel wires are usually bundled on wooden pallets, wrapped in moisture‑resistant film, and loaded into 20‑ft or 40‑ft containers, allowing a typical load of 15‑18 metric tonnes per container.

Which documents are essential before confirming an order for steel wires from Turkey?

Key documents include the commercial invoice with correct HS code, a packing list, a material test report, coating thickness certificates, and, if required by the destination, an ISO 9001 or CE conformity declaration.

Are there any regional trade restrictions I should be aware of for Turkish steel wire exports?

Exporters must ensure compliance with EU REACH regulations on heavy metals and, for the United States, meet the applicable ASTM standards; otherwise, there are no specific embargoes on Turkish steel wire shipments.