About Guangzhou Auge Business - Laminates Supplier in China

China, Guangzhou, is the base of Guangzhou Auge Business, a supplier that currently lists six active products in its catalogue. The company’s catalogue focuses on polymer film applications such as laminates, window films, waterproofing material, and PVC foil. All six items are variations of PVC film, ranging from metallic membrane foils to solid‑color decorative sheets. The product titles indicate use cases in kitchen surfaces, furniture finishes, door decoration, and high‑gloss interior styling. The supplier is classified in the “harbor” trust tier.

The listed items include a metallic PVC membrane foil for kitchen applications, a solid‑color PVC film aimed at furniture, a wood‑grain decorative PVC film for kitchen surfaces, a generic metallic PVC membrane foil, a high‑gloss decorative PVC film, and a matte door decorative PVC film. These products fall under the broader categories of laminates and PVC foil, which are typically classified under HS Chapter 39 for plastics and articles thereof. The catalogue does not provide HS codes for individual items, but the product family aligns with HS headings such as 3919 (self‑adhesive plastics) and 3910 (polyethylene terephthalate films).

Product Range and Specialties of Guangzhou Auge Business

The six PVC film products cover common market grades for interior decorative films. Metallic membrane foils are usually supplied in thicknesses between 0.15 mm and 0.30 mm and may carry a gloss level of 80 - 90 % measured by gloss meters. Solid‑color and wood‑grain films are typically produced in rolls of 1 m to 2 m width, with lengths up to 100 m, and are often rated for a fire‑retardant class such as B1 or C in accordance with Chinese GB standards. High‑gloss decorative films generally meet a surface hardness of 3 - 4 Shore A and a UV‑resistance of at least 200 hours. Matte door films are commonly specified with a low reflectance value (≤10 %) and a surface roughness below 1 µm. Buyers usually request data sheets that list thickness (µm), tensile strength (MPa), elongation at break (%), and adhesion strength (N/25 mm).

Trade and Export Information - Guangzhou Auge Business

Exports of PVC films and laminates from China are primarily destined for construction, furniture manufacturing, and interior design sectors in Southeast Asia, the Middle East, and Europe. Buyers in these regions often require compliance with REACH registration, ISO 9001 quality management, and CE marking for products that will be installed in public spaces. Standard packaging involves 1 mm‑thick polyethylene shrink wrap on rolls, with container loading of up to 20 ft or 40 ft units depending on roll dimensions. Freight is commonly arranged under FOB or CIF Incoterms, and customs inspections frequently reference HS 3919 and 3910 for classification. Chinese exporters of PVC films also need to provide a Certificate of Origin and, where requested, a Material Safety Data Sheet (MSDS) to satisfy regulatory requirements in the destination country.

Sourcing from Guangzhou Auge Business - Buyer Guidance

When sourcing PVC decorative films from Guangzhou Auge Business, buyers should request a product data sheet that confirms thickness, gloss level, fire‑rating, and mechanical properties such as tensile strength and elongation. Samples of at least 1 m × 1 m are typical for evaluating colour match, surface texture, and adhesion on the intended substrate. Verify that the supplier can provide REACH registration numbers and, if the project requires it, CE conformity assessment reports. Clarify the minimum order quantity, which for roll‑based films often starts at one full roll (approximately 100 kg) and confirm lead times, which can range from 15 to 30 days after order confirmation. Ensure that packaging meets moisture barrier requirements and that the shipping terms (FOB, CIF) are clearly defined in the contract.

What types of PVC film does Guangzhou Auge Business offer?

The catalogue lists six PVC film variants, including metallic membrane foils for kitchen use, solid‑color film for furniture, wood‑grain decorative film, high‑gloss decorative film, and matte door decorative film, all supplied as rolls suitable for interior applications.

Which HS codes are applicable to these PVC films?

While the supplier does not publish individual HS codes, PVC films of this type are generally classified under HS Chapter 39, specifically headings 3919 (self‑adhesive plastics) and 3910 (polyethylene terephthalate films).

What specifications should I check before ordering?

Buyers should verify film thickness (typically 0.15 - 0.30 mm), gloss level, fire‑retardant class (e.g., B1 or C), tensile strength (≥20 MPa), elongation at break (≥200 %), and UV‑resistance data provided in the product data sheet.

Are certifications such as ISO 9001 or REACH required?

For most international projects, buyers request ISO 9001 quality management certification and REACH registration; CE marking may also be required for products installed in public or commercial spaces.

How are the films packaged for export?

Films are typically wound on cores, wrapped in polyethylene shrink film, and loaded in 20 ft or 40 ft containers; moisture‑barrier packaging is used to protect surface finish during transit.

What is the typical minimum order quantity and lead time?

Minimum orders commonly start at one full roll (around 100 kg), and lead times are usually 15 - 30 days from order confirmation, depending on production scheduling and shipping arrangements.

Which markets commonly import these PVC films from China?

Major import markets include Southeast Asian countries, the United Arab Emirates, Saudi Arabia, and European nations such as Germany, Italy, and the United Kingdom, where the films are used in construction, furniture, and interior décor projects.