About Foshan Qi Aluminum Decorative Materials Co., Ltd. - Aluminum Decorative Materials Supplier in China

Foshan Qi Aluminum Decorative Materials Co., Ltd. is based in Foshan, Guangdong, China and lists nine active product entries. The catalogue covers several aluminum‑based items that fall under HS chapter 76, including perforated sheets, punching panels, mesh panels and double‑curved solid panels. Specific HS codes appear for products such as the Special Pattern Aluminum Perforated Sheet (7606.12) and the Special Pattern Aluminum Punching Panel (7606.92). The listed materials reference common alloy series - 3003, 5052, 5000 and 6000 series - which are standard for decorative and architectural aluminum applications. The supplier also mentions generic items like Decorative Aluminum Screen and Aluminum Mesh without separate HS codes, indicating they belong to the broader 7606 family. Overall the product set focuses on lightweight, high‑strength aluminum panels and meshes used in construction, interior design and façade systems.

Product Range and Specialties of Foshan Qi Aluminum Decorative Materials Co., Ltd.

The product portfolio includes a Special Pattern Aluminum Perforated Sheet made from 3003 or 5052 alloy (HS 7606.12), a Special Pattern Aluminum Punching Panel using Al1100 or Al3003 series (HS 7606.92), and Light Weight Aluminum Punching Panels from the 3000/5000 series (HS 7616.99). High Strength Aluminum Mesh Panel is specified as 3003‑H24 alloy (HS 7606.11) and the Aluminum Double Curved Solid Panel uses 5xxx or 6xxx series alloys (HS 7606.12). Typical industry grades for these alloys include temper designations H14, H24 for strength, and surface finishes such as brushed, anodised or powder‑coated. Perforated and punched panels are usually offered in thicknesses from 0.5 mm to 3 mm with opening sizes ranging from 2 mm to 20 mm, while mesh panels often have wire diameters of 0.3 mm to 1.0 mm and tensile strengths above 150 MPa. The catalogue’s “Decorative Aluminum Screen”, “Aluminum Mesh” and “Hot Sale Aluminum Mesh Panel” fall under the same HS 7606 family and are typically supplied in coil or cut‑to‑size formats for façade and interior partition projects.

Trade and Export Information - Foshan Qi Aluminum Decorative Materials Co., Ltd.

China remains one of the largest exporters of architectural aluminum products, with shipments of panels and meshes frequently destined for Southeast Asia, the Middle East, Europe and North America. HS chapter 7606 items are subject to customs inspections for alloy composition and surface treatment compliance, while HS 7616 items may require additional documentation for non‑standard shapes. Buyers usually request Mill Test Reports (MTR) and conformity certificates such as ISO 9001 or CE marking, especially for projects that must meet ASTM B209 (aluminum sheet) or EN 755‑2 (aluminum panels) standards. Export logistics commonly employ 40‑ft containers packed on wooden pallets, with FOB or CIF terms to major ports like Shanghai, Ningbo or Guangzhou. Chinese aluminum manufacturers often work with freight forwarders familiar with anti‑dumping duties imposed by the EU and the US, so importers should verify the applicable tariff codes and any required anti‑subsidy certificates.

Sourcing from Foshan Qi Aluminum Decorative Materials Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request a Mill Test Report that details the exact alloy designation, temper, tensile strength and chemical composition for each panel or mesh item. Verify that the thickness tolerance (typically ±0.1 mm) and surface finish specifications match project requirements; samples of the finished surface (e.g., brushed, anodised) should be inspected before bulk orders. Ask for compliance documents such as ISO 9001 quality‑management certificates, CE conformity declarations or ASTM test reports, and confirm that the packaging plan includes moisture‑resistant wrapping and edge protection suitable for 40‑ft container loading.

What alloy grades are used for the Special Pattern Aluminum Perforated Sheet?

The sheet is supplied in aluminum alloy grades 3003 or 5052, both of which are part of the 7606.12 HS code family and are commonly used for decorative perforated applications.

Does the supplier provide material certification for the High Strength Aluminum Mesh Panel?

The catalogue lists the mesh as 3003‑H24 alloy; buyers should request a Mill Test Report that confirms the alloy composition, temper and tensile strength before placing an order.

What are the typical dimensions and thicknesses for the Aluminum Double Curved Solid Panel?

These panels are manufactured from 5xxx or 6xxx series alloys and are normally offered in thicknesses between 0.8 mm and 2.5 mm, with panel widths up to 2 m and lengths up to 6 m, depending on customer specifications.

Which HS codes apply to the Light Weight Aluminum Punching Panels?

The Light Weight Aluminum Punching Panels fall under HS code 7616.99, which covers other articles of aluminum not classified elsewhere.

What packaging method is recommended for shipping the Aluminum Mesh products?

Mesh panels are typically packed flat on wooden pallets, wrapped in moisture‑resistant film, and loaded into 40‑ft containers to protect the surface finish during sea freight.

Are there any standard certifications buyers should request for these aluminum products?

Buyers usually ask for ISO 9001 quality‑management certificates, CE marking for European markets, and ASTM B209 compliance reports for sheet and panel specifications.

What lead time is typical for the Special Pattern Aluminum Punching Panel?

Lead time for custom‑pattern punching panels generally ranges from 4 to 6 weeks after final artwork approval and material confirmation.

Can the supplier provide samples of the Decorative Aluminum Screen?

Yes, sample requests are common; buyers should specify the desired screen mesh size, alloy series and surface finish when requesting a trial piece.