About Foshan Mono Building Material Co., Ltd. - Marble & Granite Supplier in China

Foshan Mono Building Material Co., Ltd. is located in Foshan, China and currently lists ten active products. The catalogue is filed under the Marble & Granite category and includes items such as beige marble water‑jet medallions, polished rainbow onyx composite tiles, and a variety of coloured marble slabs. Each entry specifies the colour and vein pattern, for example white marble with black vein or blue‑vein Palissandro Bluette. The product titles indicate typical stone finishes - polished, laminated or water‑jet cut - which are common for architectural and interior applications. The list reflects a focus on natural stone tiles and slabs intended for flooring, wall cladding and bathroom surfaces.

The ten products cover a spectrum of hues including beige, white, sky‑blue, black, red‑brown and Turkish‑style grey tones. Descriptions mention processing methods such as water‑jet shaping and polishing, suggesting ready‑to‑install dimensions. Several items reference their origin within China, while one entry cites a Turkish‑named style, indicating a design influence rather than a different source. The catalogue does not provide quantitative details such as size or thickness, but the naming convention aligns with standard stone‑industry terminology. Overall, the supplier presents a concise portfolio of decorative natural stone suitable for a range of commercial and residential projects.

Product Range and Specialties of Foshan Mono Building Material Co., Ltd.

The product portfolio consists exclusively of natural marble and onyx varieties, each offered as tiles or slabs. In the stone market, marble is commonly graded by visual quality (e.g., premium, commercial) and by technical specifications such as thickness (typically 10 mm to 30 mm), surface finish (polished, honed, laminated) and dimensions (often 600 mm × 600 mm or larger slabs). Onyx composite tiles are usually produced with a backing material and are evaluated for uniform colour and translucency. Buyers of marble tiles often look for low porosity (below 0.5 % water absorption) and a compressive strength above 70 MPa, standards that are reflected in ASTM C615 and EN 1469. The catalogue’s emphasis on veining patterns - wood veins, rainbow onyx, blue veins - matches common buyer preferences for decorative effect in high‑visibility interiors.

Trade and Export Information - Foshan Mono Building Material Co., Ltd.

China ranks among the world’s largest exporters of natural stone, with HS chapter 68 covering “Granite, marble, travertine and other calcareous building stone”. The specific HS code most frequently applied to finished marble tiles and slabs is 6802.20‑99 (marble, not elsewhere specified). Export shipments are typically packed in wooden crates or cardboard boxes with protective foam, and shipped in 20‑foot or 40‑foot containers. Major import regions for Chinese marble include the United States, the European Union, the Middle East and Southeast Asia, where architects and developers seek a wide colour palette. Buyers usually request certificates such as ISO 9001 for quality management, CE marking for EU compliance, and test reports confirming water absorption, compressive strength and dimensional tolerances. While the supplier’s own certifications are not listed, these documents are standard for natural stone trade from China.

Sourcing from Foshan Mono Building Material Co., Ltd. - Buyer Guidance

When sourcing marble or onyx from this supplier, buyers should obtain a physical sample of the exact colour and finish to verify veining consistency. Request laboratory test reports that cover water absorption, compressive strength, freeze‑thaw resistance and dimensional accuracy, as these are typical acceptance criteria. Confirm that the supplier can provide any required certifications - ISO 9001, CE or other regional standards - before finalising a contract. Verify packaging details, such as the use of reinforced wooden crates, moisture‑resistant liners and palletization, to prevent breakage during transit. Clarify lead times for slab cutting, surface finishing and shipment, and establish the Incoterm (e.g., FOB Foshan or CIF destination port) that will govern responsibility and cost allocation.

What types of stone does Foshan Mono Building Material Co., Ltd. list in its catalogue?

The catalogue includes ten items of natural marble and onyx, ranging from beige marble water‑jet medallions to polished rainbow onyx composite tiles and various coloured marble slabs.

Are the listed products finished with a specific surface treatment?

Product titles indicate finishes such as polished, laminated or water‑jet cut, which are standard surface treatments for decorative stone tiles and slabs.

What HS code is typically used for these marble and onyx products?

Marble and onyx tiles or slabs are generally classified under HS code 6802.20‑99, the category for marble not elsewhere specified.

Which certifications should a buyer request for these stone products?

Buyers normally request ISO 9001 quality‑management certification, CE marking for EU markets, and laboratory test reports for water absorption and compressive strength.

What are common dimensions and thicknesses for the stone items in this range?

In the natural stone market, tiles are often 600 mm × 600 mm and slabs 1200 mm × 2400 mm, with thicknesses ranging from 10 mm to 30 mm, although exact sizes should be confirmed with the supplier.

How are the stone products typically packaged for export?

Export shipments are usually packed in reinforced wooden crates or sturdy cardboard boxes with foam or corrugated padding, placed on pallets to protect against breakage during sea freight.

What Incoterms are commonly used for Chinese marble exports?

Buyers frequently use FOB (Free on Board) from a Chinese port such as Shenzhen or CIF (Cost, Insurance, Freight) to the destination port, depending on the agreed division of costs and risk.

Is a minimum order quantity (MOQ) required for these marble items?

Natural stone suppliers often set an MOQ based on container load - typically one 20‑foot container (around 12‑15 tons) or a specific number of slabs - but the exact MOQ should be confirmed with the supplier.