About Eshal Industries - Other Ores & Minerals Supplier in Pakistan

Based in Sindh, Pakistan, Eshal Industries lists 17 mineral products in its catalogue. The company offers Barite (HS 2511.10, natural BaSO4), Chromite (HS 2610.00, FeCr2O4 concentrate), Limestone (no HS code provided), Iron Ore (HS 2601.11, hematite/magnetite with 62‑65 % Fe), Feldspar (HS 2529.10, potash/soda feldspar), Fluorspar (HS 2529.21, CaF2), Raw Magnesite (HS 2519.10, MgCO3), Bauxite (HS 2606.00, aluminum ore concentrate), Manganese (HS 8111.00, electrolytic Mn 99.7 %), Kaolin (HS 2507.00, Al2O3·2SiO2·2H2O), Gypsum (HS 2520.10, CaSO4·2H2O), Salt (no HS code), Talc (HS 2526.20, Mg3Si4O10(OH)2), Quartz (HS 2506.10, SiO2), High‑Grade Magnesite (HS 2519.10, MgCO3 > 45 %, SiO2 < 0.32 %), Magnesite (HS 2519.10, MgCO3 45 %), and Talc Powder and Lumps (HS 2526.20). The product list spans the “Other Ores & Minerals” category and related sub‑categories such as Barite Ore, Chrome Ore, Limestone, Iron Ore, Feldspar, Bauxite & Aluminium Ore, and Manganese.

Product Range and Specialties of Eshal Industries

Eshal Industries’ catalogue includes natural Barite, Chromite concentrate, bulk Limestone, Iron Ore with specified Fe content, potash and soda Feldspar, high‑purity Fluorspar, several grades of Magnesite, Bauxite concentrate, electrolytic Manganese metal, Kaolin clay, natural Gypsum, Himalayan Salt, Talc in powder and lump form, and quartz sand. Each product is identified by its HS code family, enabling straightforward customs classification for buyers.

In the global minerals market, Barite is typically supplied at > 99 % BaSO4 purity and used in drilling fluids; Chromite concentrates usually contain 45‑55 % Cr2O3 for ferrochrome production; Limestone grades for steel and cement range from 90‑95 % CaCO3; Iron Ore specifications often require 62‑65 % Fe for blast‑furnace feed; Feldspar for ceramics is classified by K2O/Na2O ratios; Fluorspar grades above 95 % CaF2 are standard for hydrofluoric acid; Magnesite for refractory applications is expected to have MgO > 45 % and silica < 0.5 %; Bauxite for alumina production commonly meets 45‑55 % Al2O3; Electrolytic Manganese metal is normally 99.7 % purity; Kaolin quality is measured by brightness (L* > 80) and low iron; Gypsum for construction is required to have moisture < 0.5 %; Talc oil‑absorption values of 120‑130 g/100 g are typical; Quartz for glass making must meet SiO2 > 99.5 %.

Trade and Export Information - Eshal Industries

Pakistani mineral exporters typically ship bulk ores from the Port of Karachi or Port Qasim using 20‑ft or 40‑ft containers for finer products (e.g., Talc, Kaolin) and open‑top bulk bags or ocean‑freight vessels for larger volumes such as Bauxite or Iron Ore. The HS code families listed (e.g., 2511, 2610, 2601, 2529, 2526) fall under Chapter 25 (mineral products) and Chapter 26 (metal ores) of the Harmonized System, which are subject to standard customs duties and often require a Certificate of Origin and a commercial invoice. Buyers in the GCC, Far East, Europe and South Asia commonly request ISO 9001 compliance (held by Eshal Industries), REACH conformity for EU imports, and SGS or Bureau Veritas inspection reports for purity and moisture content. Typical packaging includes 1‑tonne polypropylene bulk bags, 25‑kg paper bags for specialty powders, and moisture‑controlled containers for salts. Incoterms such as FOB Karachi or CIF Dubai are frequently used, with lead times of 30‑45 days depending on product volume and shipping route.

Sourcing from Eshal Industries - Buyer Guidance

When sourcing minerals from Eshal Industries, buyers should request a current Certificate of Analysis that details chemical composition (e.g., Fe % for Iron Ore, MgO % for Magnesite), moisture content, particle‑size distribution and any applicable heavy‑metal limits. The ISO 9001 certificate already held by the supplier should be verified, and additional third‑party test reports (e.g., SGS, Intertek) are advisable for high‑purity products such as Fluorspar or high‑grade Talc. Typical minimum order quantities range from 10 metric tonnes for fine powders up to 30 metric tonnes for bulk ores, with lead times of 30‑45 days after receipt of a pro‑forma invoice. Buyers should also confirm packaging specifications - bulk bags for large volumes, sealed drums for hygroscopic salts, and moisture‑proof liners for Gypsum - to ensure product integrity during transit.

What HS codes are used for the minerals listed by Eshal Industries?

The catalogue assigns HS 2511.10 to Barite, 2610.00 to Chromite, 2601.11 to Iron Ore, 2529.10 to Feldspar, 2529.21 to Fluorspar, 2519.10 to both Raw and High‑Grade Magnesite, 2606.00 to Bauxite, 8111.00 to Electrolytic Manganese, 2507.00 to Kaolin, 2520.10 to Gypsum, 2526.20 to Talc and Talc Powder/Lumps, and 2506.10 to Quartz. Limestone and Salt were listed without HS codes.

Which certifications are typically required for importing these mineral products?

Importers usually require the supplier’s ISO 9001 certificate, a Certificate of Origin, and third‑party inspection reports (e.g., SGS, Bureau Veritas). For EU destinations, REACH compliance may be needed, while GCC buyers often request a free‑sale certificate.

What are the common purity specifications for Barite and Fluorspar?

Barite supplied for drilling fluids is generally expected to be > 99 % BaSO4 purity. Fluorspar used in chemical applications normally meets 95‑98 % CaF2 purity with low iron and silica levels.

How are bulk mineral shipments typically packaged for export?

Large‑volume ores such as Bauxite, Iron Ore and Chromite are usually loaded in 20‑ft or 40‑ft containers or shipped in 1‑tonne polypropylene bulk bags on ocean vessels. Fine powders like Talc, Kaolin and Gypsum are packed in 25‑kg paper bags or sealed moisture‑proof containers.

What documentation should a buyer request before confirming an order?

Buyers should obtain the latest ISO 9001 certificate, a detailed Certificate of Analysis for the specific product batch, the commercial invoice, packing list, Bill of Lading, and any required third‑party test reports. For EU markets, a REACH compliance statement is advisable.

What are typical lead times and minimum order quantities for these minerals?

Lead times are generally 30‑45 days from receipt of a pro‑forma invoice. Minimum order quantities vary by product: about 10 metric tonnes for fine powders (e.g., Talc, Fluorspar) and 30 metric tonnes for bulk ores (e.g., Bauxite, Iron Ore).

Can samples be provided before a full shipment?

Eshal Industries can supply small‑scale samples (e.g., 5‑10 kg for powders, 1‑tonne bulk bag for ores) upon request. Samples are typically dispatched under FOB terms, and the buyer bears shipping costs.