About Dongguan ASD New Materials Co., Ltd - Foams Supplier in China

Dongguan ASD New Materials Co., Ltd is located in Dongguan, China and currently lists five active products. The catalogue concentrates on foam and plastic products, specifically conductive EVA foam sheets, PP foam sheets, IXPP foam for automotive headliners and interiors, ESD IXPE foam rolls or sheets, and electrostatic discharge EVA foam sheets. These items belong to HS‑code families such as 3916 (cellular plastics) and 3921 (plastic sheets, plates, films and other flat products). The supplier’s product set reflects typical Chinese export volumes for engineered foams used in electronics, automotive and packaging sectors.

All five offerings are supplied as sheets or rolls, with thicknesses that commonly range from 0.5 mm to 10 mm and widths up to 1 m. Conductive EVA foams are used for electromagnetic shielding, while PP foams serve lightweight cushioning applications. IXPP foams are cross‑linked polyolefin materials designed for automotive interior panels, and the ESD IXPE variants provide surface resistivity below 10⁹ Ω/sq for static control. The electrostatic discharge EVA sheets meet similar ESD specifications for consumer electronics packaging.

Product Range and Specialties of Dongguan ASD New Materials Co., Ltd

The catalogue includes conductive EVA foam sheets, which in the industry are typically produced with densities of 30‑200 kg/m³ and surface resistivity between 10 and 100 Ω·cm. PP foam sheets are usually closed‑cell, with densities from 10‑100 kg/m³ and compression set values under 5 % per ASTM D3574. IXPP foam for automotive headliners is cross‑linked polyolefin, often fire‑retardant to UL‑94 V‑0 or V‑1 standards, with thicknesses of 2‑8 mm for interior panel applications. ESD IXPE foam rolls or sheets are engineered to meet surface resistivity below 10⁹ Ω/sq and are supplied in rolls up to 25 m length. Electrostatic discharge EVA foam sheets share similar conductivity targets and are commonly offered in standard sheet sizes (1 m × 1 m) for easy integration into packaging lines.

Typical industry specifications for these foam categories include moisture content below 0.5 %, tensile strength above 0.3 MPa for EVA, and flame‑retardant certifications such as IEC 60335 for automotive interior use. Buyers often request material data sheets that list density, hardness (Shore A 30‑80), and dimensional stability. Packaging is usually in polyethylene‑wrapped pallets, with each 20‑ft container capable of holding approximately 1,200 sheets depending on thickness.

Trade and Export Information - Dongguan ASD New Materials Co., Ltd

China is a major exporter of engineered foam products, supplying North America, Europe and Southeast Asia with volumes that exceed several hundred thousand metric tonnes annually. Foams classified under HS 3916 and 3921 are subject to customs inspections that verify compliance with REACH and, for electronic applications, RoHS directives. Typical importers include automotive OEMs, consumer electronics manufacturers, and packaging firms that require ESD‑controlled or flame‑retardant materials.

Buyers usually request certificates such as ISO 9001 quality management, REACH registration, and, where applicable, UL 94 flame‑rating or IEC 60335 safety test reports. Standard Incoterms for these shipments are FOB or CIF, with logistics favoring 20‑ft or 40‑ft containers; a 40‑ft container can accommodate up to 2,400 sheets of 1 mm thickness. Export documentation often includes a commercial invoice, packing list, certificate of origin, and material safety data sheet (MSDS).

Sourcing from Dongguan ASD New Materials Co., Ltd - Buyer Guidance

When sourcing from Dongguan ASD New Materials Co., Ltd, request a full material data sheet that details density, hardness, surface resistivity, moisture content and any flame‑retardant classification. Verify that the supplier can provide REACH compliance statements and, for ESD products, test reports showing surface resistivity below 10⁹ Ω/sq. Samples of at least 1 m² are advisable to confirm dimensional tolerances and mechanical performance before confirming a full order.

Confirm the minimum order quantity, which is commonly expressed in per‑container or per‑tonne terms for foam sheets, and ask for lead‑time estimates that typically range from four to six weeks after sample approval. Ensure that packaging specifications meet your logistics plan - e.g., pallets wrapped in polyethylene and labeled with HS codes 3916 or 3921. Request any additional certifications required for your target market, such as UL‑94 for automotive interiors or IEC‑60335 for consumer electronics.

What types of foam does Dongguan ASD New Materials Co., Ltd offer?

The supplier lists conductive EVA foam sheets, standard PP foam sheets, IXPP foam for automotive headliners, ESD IXPE foam rolls or sheets, and electrostatic discharge EVA foam sheets.

Which HS codes are relevant to these foam products?

Foam sheets and rolls typically fall under HS 3916 (cellular plastics) and HS 3921 (plastic sheets, plates, films and other flat products).

What industry standards should I check for automotive headliner foams?

Automotive IXPP foams are often required to meet UL‑94 flame‑rating (V‑0 or V‑1) and IEC 60335 safety standards, with density and compression‑set values defined in ASTM D3574.

Are certifications like ISO 9001 or REACH mandatory for these products?

While the supplier’s catalogue does not list specific certifications, buyers typically request ISO 9001 quality management and REACH compliance for foam products exported from China.

What sample size is practical for evaluating the foam sheets?

A 1 m² sample of each sheet type is common and allows verification of thickness, density, surface resistivity and mechanical properties before a larger purchase.

What is the usual packaging and container capacity for these foams?

Foam sheets are usually wrapped in polyethylene and palletized; a 20‑ft container can hold roughly 1,200 sheets of 1 mm thickness, while a 40‑ft container can hold up to 2,400 sheets.

Which markets most frequently import these Chinese foam products?

Major import regions include North America, the European Union, and Southeast Asian countries, especially for automotive interiors, electronic device packaging and consumer goods.

What documentation should I request before placing an order?

Ask for a material data sheet, REACH compliance statement, any relevant flame‑retardant or ESD test reports, and standard export documents such as a commercial invoice, packing list and certificate of origin.