About Dalian Jin Xiang Chemical Co., Ltd. - Industrial Chemicals Supplier in China

Dalian Jin Xiang Chemical Co., Ltd. is located in Dalian, China and currently lists five active products. The catalogue spans the Industrial Chemicals, Agriculture and Chemicals & Allied Products categories, reflecting a focus on basic and specialty chemicals. The five items are Perchloroethylene, Methanol methyl isobutyl (MIBC), Gum rosin, Dicalcium phosphate (DCP) and Maleic anhydride. Each product falls under the HS chapter 29 organic chemicals or HS chapter 38 fertilizers, which are common classification groups for Chinese chemical exporters. The supplier is classified as an imported tier with a harbor trust rating, indicating it operates through established logistics channels in China.

The supplier’s catalogue provides the chemical name only, without detailed specifications or HS‑code numbers, so buyers must request the exact HS‑code for customs clearance. The product set includes a dry‑cleaning solvent (Perchloroethylene), a surfactant solvent (MIBC), a natural resin (Gum rosin), a phosphate mineral (Dicalcium phosphate) and a polymer precursor (Maleic anhydride). These chemicals are typical bulk commodities used in textile processing, metal cleaning, adhesives, animal feed and polyester production respectively. Buyers can expect standard bulk packaging such as 20 ft or 40 ft containers, IBCs or drums, depending on the material’s safety data sheet.

Product Range and Specialties of Dalian Jin Xiang Chemical Co., Ltd.

Perchloroethylene is normally supplied in technical grade with purity around 99 % and is used for dry‑cleaning and metal degreasing. Buyers usually request a Certificate of Analysis (CoA) confirming the purity and a Material Safety Data Sheet (MSDS) that lists the flash point and vapor pressure. Methanol methyl isobutyl (MIBC) is a low‑odor solvent employed in inks and coatings; typical specifications include 99.5 % purity, water content below 0.1 % and a cloud point near - 40 °C. Gum rosin, derived from pine, is offered in gum grade or refined grade; industry standards cite acid value below 30 mg KOH/g and softening point between 80‑100 °C. Dicalcium phosphate (DCP) is a feed‑grade mineral with particle size 150‑250 µm and calcium‑phosphorus ratio near 1.5, often required to meet Chinese GB standards for animal nutrition. Maleic anhydride is a polymerisation monomer typically supplied in 99 % purity, with moisture content below 0.05 % and packaged under nitrogen to prevent hydrolysis. The catalogue does not list HS codes, but these products belong to HS chapters 29 (organic chemicals) and 38 (fertilizers) which guide customs classification.

Trade and Export Information - Dalian Jin Xiang Chemical Co., Ltd.

Chinese chemical exporters commonly ship to Southeast Asia, Europe and North America, where demand for solvents, resins and feed additives remains strong. The HS‑code families for the listed items (e.g., 2905 for Perchloroethylene, 2906 for MIBC, 3808 for Dicalcium phosphate) trigger standard customs duties and may require import licenses in the destination country. Buyers usually require compliance with REACH (EU), TSCA (US) or GHS labeling, as well as an ISO 9001 quality management certificate from the supplier. Typical logistics involve 20 ft or 40 ft containers, with drums for liquids and bulk bags for powders, and Incoterms such as FOB Dalian or CIF destination port are frequently used. Chinese export regulations mandate a full MSDS, a CoA and, where applicable, a phytosanitary certificate for feed‑grade phosphates. The supplier’s harbor trust tier suggests it uses recognized Chinese ports and customs brokers, facilitating smoother clearance for bulk chemical shipments.

Sourcing from Dalian Jin Xiang Chemical Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request the latest MSDS and a CoA for each chemical to verify purity, moisture content and hazardous classifications. Verify that the product meets the grade required for your application - for example, technical grade versus USP grade for Perchloroethylene, or gum versus refined grade for Gum rosin. Ask for test reports covering key parameters such as flash point, cloud point, particle size distribution or acid value, depending on the material. Confirm the packaging format (drum, IBC, bulk bag) and ensure that the container complies with UN hazardous material regulations if applicable. Clarify the minimum order quantity, typical lead time (often 2‑4 weeks for bulk chemicals from China) and the preferred Incoterm before finalising the contract.

What grades of Perchloroethylene does Dalian Jin Xiang Chemical provide?

The supplier lists Perchloroethylene without a grade, so buyers should request technical grade specifications, typically around 99 % purity, and obtain a Certificate of Analysis before purchase.

Can I obtain a sample of Methanol methyl isobutyl (MIBC)?

Samples of MIBC are usually offered in 1‑L containers; request a sample together with the MSDS and a CoA that confirms purity above 99.5 % and low water content.

What documentation is required for importing Dicalcium phosphate (DCP) for animal feed?

Importers generally need a Material Safety Data Sheet, a Certificate of Analysis showing particle size and calcium‑phosphorus ratio, and a compliance certificate with the destination country’s feed additive regulations (e.g., EU Feed Additives Regulation).

Is Gum rosin from this supplier suitable for printing inks?

Gum rosin used in inks is typically supplied in gum grade with an acid value below 30 mg KOH/g; request the CoA and a test report for softening point to confirm suitability.

What are the typical shipping containers used for Maleic anhydride?

Maleic anhydride is usually packed in sealed drums or IBCs to prevent moisture ingress; bulk shipments are placed in 20 ft or 40 ft containers depending on volume.

Which certifications should I verify before buying chemicals from this Chinese supplier?

Buyers should ask for ISO 9001 certification, REACH compliance documentation for EU markets, and any relevant GHS labeling, as well as the supplier’s MSDS and CoA for each product.

What is the standard lead time for bulk orders from Dalian Jin Xiang Chemical?

Lead times for bulk chemical orders from Chinese manufacturers commonly range from 2 to 4 weeks, subject to production scheduling and export clearance.

How are the chemicals packaged for export from Dalian?

Export packaging typically follows UN recommendations: liquids in 200 L drums or 1 000 L IBCs, powders in bulk bags or sealed drums, with appropriate hazard labeling and palletisation for container loading.