About Cus-steel Group Co., Ltd. - Steel Sheets Supplier in China

Cus-steel Group Co., Ltd. is based in China and currently lists seven active steel product entries in its catalogue. The supplier groups its offerings under broad categories such as Steel Sheets, Steel Coils, Cold Rolled Coils, Steel, and Galvanized Iron Plates. The catalogue includes items identified as galvanized steel coil, various coated products (PPGI, GI, CRC, Galvalume), pre‑painted steel iron, generic steel, galvanized iron, Galvalume, and pre‑painted cold‑rolling steel. These product names correspond to standard steel families that fall under HS chapter 72, which covers iron and steel products. The listing does not provide specific HS‑8 codes, but the descriptions align with common export codes for rolled steel products.

The supplier’s portfolio reflects typical downstream steel processing stages, from hot‑rolled coils to cold‑rolled and coated variants. Galvanized coils are usually coated with a zinc layer to improve corrosion resistance, while Galvalume combines zinc and aluminum for enhanced performance. Pre‑painted steel (PPGI) is coated with polymer films for aesthetic and protective purposes. Cold‑rolled coils often meet tolerances such as thickness ranges of 0.2 - 2.0 mm and width up to 2 m, while galvanized and Galvalume products commonly adhere to standards like ASTM A653 or EN 10346. Buyers can expect these products to be shipped in coil bundles or on pallets, matching standard steel export logistics.

Product Range and Specialties of Cus-steel Group Co., Ltd.

The catalogue shows seven distinct steel items, including galvanized steel coil, PPGI/GI/CRC/Galvalume coated sheets, pre‑painted steel iron, generic steel, galvanized iron, Galvalume, and pre‑painted cold‑rolling steel. Each entry represents a common steel processing output used across construction, automotive, and appliance manufacturing. Industry practice classifies these under grades such as G90 (galvanized), Z275 (Galvalume), and standard pre‑painted grades meeting ISO 12944 for corrosion protection. Typical specifications include coating thickness measured in microns (e.g., 45 µm for hot‑dip galvanizing) and paint film thickness of 30 - 120 µm for PPGI.

In the global steel market, buyers often request compliance with standards like ASTM A792 for hot‑dip galvanized steel, ASTM A792 for Galvalume, and ISO 1461 for hot‑dip zinc coatings. Cold‑rolled coil specifications frequently cite surface roughness (Ra ≤ 0.8 µm) and tensile strength values in the range of 350 - 550 MPa. The supplier’s product mix therefore aligns with the typical technical parameters required for structural, automotive, and appliance sectors.

Trade and Export Information - Cus-steel Group Co., Ltd.

China remains one of the world’s largest exporters of flat‑rolled steel products, with major destination regions including Southeast Asia, the Middle East, Africa, and parts of Europe. HS codes commonly used for the catalogue items are 7208 (flat‑rolled products of iron or non‑alloy steel, not clad) and 7209 (flat‑rolled products of iron or non‑alloy steel, clad, plated or coated). Export shipments are usually organized in 20‑foot or 40‑foot containers, with coils loaded on pallets or in open‑top containers, and are often shipped under CIF or FOB terms.

Importers of galvanized and pre‑painted steel typically require certificates such as Mill Test Reports (MTR), compliance with ISO 9001 quality management, and, where applicable, CE marking for EU markets. Chinese steel exporters also need to meet customs inspection standards like the China Inspection and Quarantine (CIQ) requirements. Buyers should verify that the product’s coating thickness, tensile strength, and dimensional tolerances are documented before shipment, as these parameters are routinely inspected at the port of entry.

Sourcing from Cus-steel Group Co., Ltd. - Buyer Guidance

When sourcing steel coils or sheets from Cus-steel Group, buyers should request the latest Mill Test Report, coating certification (e.g., ISO 1461 for galvanizing), and a product data sheet that lists thickness, width, tensile strength, and coating weight. Samples of the coated surface, when possible, help confirm colour consistency and adhesion, especially for pre‑painted grades.

Verification of compliance with the relevant ASTM or EN standards should be part of the due‑diligence process. Buyers are advised to confirm the packaging format (coil on pallet or bundled) and the planned Incoterm, as this influences handling and insurance. Clarifying the lead time for production and any pre‑shipment inspection can reduce the risk of non‑conformity upon arrival.

What steel product families does Cus-steel Group list in its catalogue?

The catalogue includes galvanized steel coil, coated variants (PPGI, GI, CRC, Galvalume), pre‑painted steel iron, generic steel, galvanized iron, Galvalume, and pre‑painted cold‑rolling steel.

Which HS codes are typically applied to the listed steel products?

Exporters of flat‑rolled steel from China usually use HS 7208 for uncoated coils and sheets, and HS 7209 for coated or plated products such as galvanized or Galvalume steel.

What standards should buyers check for galvanized and Galvalume coils?

Buyers commonly reference ASTM A653 or EN 10346 for hot‑dip galvanized steel, and ASTM A792 or ISO 1461 for Galvalume coating specifications.

What documentation is recommended before placing an order?

Request a Mill Test Report, coating certification (ISO 1461 or equivalent), and a product data sheet detailing thickness, width, tensile strength, and coating weight.

Are there typical minimum order quantities for these steel products?

Minimum order quantities vary by product, but coil shipments often start at a single 20‑foot container, roughly 10‑15 tons depending on coil dimensions.

What are common packaging and shipping methods for the coils?

Coils are usually bundled on steel pallets or loaded in open‑top containers; shipment terms are frequently FOB or CIF, with 20‑foot or 40‑foot containers used for sea freight.

Which markets commonly import the types of steel offered by this supplier?

Major import markets include Southeast Asian countries, the Gulf Cooperation Council states, African nations, and European regions that require construction and manufacturing steel.