About Confab Metal Private Limited - Other Ores & Minerals Supplier in India

Confab Metal Private Limited is based in India and currently lists eleven distinct products in its catalogue. The portfolio spans agricultural commodity Areca nuts, several ferro‑alloys such as Silico Manganese (HS 7202.30) and Ferro Silicon, refractory materials including Dead Burned Magnesia (HS 3816.00) and high‑alumina fire bricks, as well as steel billets (HS 7207.11). Each entry is identified by a specific HS‑code family that aligns with international customs classifications. The supplier’s catalogue reflects a focus on mineral and refractory categories rather than finished consumer goods.

The product set includes Whole Dried Areca Nut (HS 0802.80), Ferro‑Silico Manganese with 60‑75 % Mn and 14‑30 % Si (HS 7202.30), Dead Burned Magnesia used as high‑MgO refractory aggregate (HS 3816.00), Zirconia ceramic components (HS 6903.20), high‑alumina castable (HS 3816.00) and composite blocks such as Laddle Well Block (HS 6902.20). Additional offerings are Magnesium Oxide composite board (HS 3824.10), Tundish Well Block (HS 6903.20) and mild‑steel billets (HS 7207.11). The catalogue therefore covers a mix of raw ores, ferro‑alloys, and engineered refractory blocks.

Product Range and Specialties of Confab Metal Private Limited

Within the ore and mineral segment, the Silico Manganese and Ferro Silicon conform to typical ferro‑alloy grades used in steelmaking, where Mn content between 60‑75 % and Si content of 14‑30 % meet ASTM A754 specifications. Indian exporters of manganese and silicon often provide chemical analysis certificates confirming impurity limits for Fe, Al, and P. The zircon products, classified under HS 6903.20, are standard zirconia ceramics with ZrO₂ content above 95 % and are comparable to grades used in ceramic tooling and refractory linings.

The refractory portfolio - Dead Burned Magnesia, high‑alumina castable, alumina‑magnesia composite blocks, and fire bricks - matches common industry grades such as Al₂O₃ 90 % for castables and MgO > 95 % for magnesia refractories. Typical specifications include bulk density (1.6‑1.8 t/m³), cold crushing strength (≥35 MPa), and moisture content below 0.5 %. Mild‑steel billets (HS 7207.11) are supplied in standard 10 mm × 10 mm dimensions and meet SAE 1008/1010 carbon‑content limits.

Trade and Export Information - Confab Metal Private Limited

India is a major exporter of ferro‑alloys, zirconia ceramics, and refractory materials, with primary destinations in the Middle East, Southeast Asia, and European steel and glass manufacturers. HS chapter 72 (iron and steel) and chapter 69 (ceramic products) are the main customs classifications for these goods, and shipments are typically handled in 20‑ft or 40‑ft containers, or in bulk bags for refractory aggregates.

Buyers usually require certificates such as ISO 9001 quality‑management, ISO 14001 environmental, and material test reports that verify chemical composition and mechanical properties. For refractory bricks and castables, compliance with EN 15270 or ASTM C1396 is often requested. Standard Incoterms for Indian exporters include FOB Mumbai or CIF Dubai, with freight forwarding arranged through major ports like Chennai and Kolkata.

Sourcing from Confab Metal Private Limited - Buyer Guidance

Sourcing from Confab Metal should begin with a request for the latest material test report, chemical analysis, and, where applicable, a mill test certificate that details Mn, Si, Al₂O₃, and MgO percentages. Verify that the supplier can provide MSDS for hazardous refractory chemicals and that packaging meets ISPM 15 phytosanitary standards for the Areca nut shipment.

Typical minimum order quantities range from one metric ton for ferro‑alloys to 5 m³ for refractory blocks, with lead times of 15‑30 days after order confirmation, depending on product and shipping term. Buyers should confirm container loading plans (e.g., 1 ton per 20‑ft container for magnesia aggregate) and request pre‑shipment inspection reports if required by the importing country.

What product categories are listed by Confab Metal Private Limited?

The catalogue includes Areca nuts, Silico Manganese, Ferro Silicon, Dead Burned Magnesia, Zirconia ceramic items, high‑alumina castable, alumina‑magnesia composite blocks, magnesium‑oxide board, refractory fire bricks, Tundish Well Block and mild‑steel billets.

How can a buyer obtain a sample of the Whole Dried Areca Nut?

Samples are typically dispatched in a sealed 25 kg bag under phytosanitary certification. Request the sample in writing and confirm the preferred Incoterm, usually FOB Mumbai, before shipment.

Which certifications are commonly required for the refractory products?

Importers often ask for ISO 9001 or ISO 14001 compliance, a mill test certificate, and conformity to EN 15270 (refractory castables) or ASTM C1396 (fire bricks). These documents should be provided prior to loading.

What is the HS code for Silico Manganese?

Silico Manganese is classified under HS code 7202.30, which covers ferro‑silico alloys containing manganese.

What packaging format is typical for the high‑alumina castable?

The castable is usually packed in 20‑ft containers in bulk bags of 1 ton each, with moisture barriers to preserve the Al₂O₃ content. Palletized units are also accepted for smaller orders.

What is the usual lead time for the mild‑steel billets (MS Billets)?

Lead time for MS Billets is generally 15‑30 days after order confirmation, subject to steel mill production scheduling and the selected shipping term.

Which regions commonly import Indian zirconia ceramic products?

Indian zirconia ceramics are frequently shipped to the Middle East, Europe (especially Germany and Italy), and East Asian countries such as South Korea, where they are used in cutting tools and high‑temperature linings.