About China Shipping Anchor Chain (Jiangsu) Co., Ltd. - Industrial Chains, Anchor & Hooks Supplier in China

China Shipping Anchor Chain (Jiangsu) Co., Ltd. is based in Jiangsu province, China and lists ten active products in its catalogue. The company focuses on marine and offshore mooring systems and provides stud‑link anchor chains ranging from 26 mm to 73 mm in diameter. Each product is identified by a specific grade (U2 or U3), material designation (CM490 or CM690), and an HS‑code within chapter 73.15 for steel chains (e.g., 7315.12, 7315.81, 7315.82, 7315.89). The catalogue includes grades U2 Stud Link chains in diameters 26 mm, 28 mm, 30 mm, 32 mm, 34 mm, 36 mm, 38 mm, 40 mm, 42 mm and a single U3 Stud Link chain of 73 mm.

The listed categories cover Industrial Chains, Anchor & Hooks, Steel Fasteners, Steel Hardware, Door Chains, Other Type Of Fasteners, Fasteners, Bolts and Artificial Chains. By the end of 2021 the supplier reported certifications from ten international classification societies (including DNV‑GL, ABS, BV, LR) as well as ISO 9001, ISO 14001 and OHSAS 18001. No additional product lines or services beyond the ten chain items are mentioned in the supplied data.

Product Range and Specialties of China Shipping Anchor Chain (Jiangsu) Co., Ltd.

The catalogue presents stud‑link anchor chains in standard marine grades U2 and U3. Grade U2 chains are manufactured from carbon‑steel grade CM490, while the larger 73 mm U3 chain uses CM690, a higher‑strength alloy. Typical industry specifications for these grades include a minimum tensile strength of 490 MPa for CM490 and 690 MPa for CM690, with proof loads defined by the chain diameter according to ABS and DNV‑GL tables. Chain links are forged and welded, and the stud‑link design provides higher shear resistance compared with plain link chains.

In global anchor‑chain markets, diameters between 22 mm and 200 mm are common, with most buyers specifying the chain grade, material, and link type to match vessel size and classification requirements. HS‑code 7315.* is the standard tariff classification for steel chains, and buyers often request mill test reports and classification approvals that reference the exact HS sub‑heading (e.g., 7315.81 for 30 mm stud link chains).

Trade and Export Information - China Shipping Anchor Chain (Jiangsu) Co., Ltd.

China is a major exporter of marine steel products, and anchor chains from Jiangsu are routinely shipped to shipyards and offshore operators in Southeast Asia, the Middle East, Europe and Africa. The HS‑code family 7315 covers steel chains and is subject to standard customs duties and anti‑dumping investigations in many importing countries. Buyers typically require certification from classification societies such as ABS, DNV‑GL, LR or BV, together with ISO 9001 quality system certification, to satisfy maritime safety regulations under SOLAS and IMO guidelines. Packaging for stud‑link chains is usually in bundled steel coils or on pallets, loaded into 20‑foot or 40‑foot containers for containerized shipments, or secured on roll‑on/roll‑off vessels for larger bulk orders. Common Incoterms used by Chinese steel exporters include FOB Shanghai, CIF Dubai or CIF Rotterdam, depending on the buyer’s logistics plan.

The Chinese export framework for steel chains includes compliance with the China Compulsory Certificate (CCC) for certain safety‑critical items, although many marine chains fall under exemption when accompanied by classification society approval. Inspection agencies such as SGS or Bureau Veritas often perform pre‑shipment inspections to verify dimensions, material grade and heat‑treatment records. Export documentation typically includes a commercial invoice, packing list, bill of lading, certificate of origin and the relevant classification society certificates.

Sourcing from China Shipping Anchor Chain (Jiangsu) Co., Ltd. - Buyer Guidance

When sourcing from this supplier, buyers should request the mill test certificate (MTC) that confirms CM490 or CM690 chemical composition and mechanical properties for the specific diameter ordered. A proof‑load test report aligned with the ABS or DNV‑GL standard for the chosen grade (U2 or U3) should be verified before contract finalisation. It is also prudent to obtain copies of the ten classification society approvals listed in the supplier profile and the ISO 9001, ISO 14001 and OHSAS 18001 certificates to ensure compliance with quality and environmental management systems.

Buyers should confirm the exact HS‑code for the ordered diameter (e.g., 7315.81 for 30 mm stud‑link chain) to avoid customs mis‑classification. Typical minimum order quantities for stud‑link chains range from one full bundle (approximately 500 kg) to full container loads, depending on the buyer’s project size. Lead times for forged steel anchor chains in China are generally 30‑45 days after receipt of a confirmed purchase order and required test documentation. Verify packaging details - bundles are usually shrink‑wrapped and palletised - to ensure safe handling during sea transport.

What anchor chain grades are listed in the catalogue?

The catalogue lists Grade U2 stud‑link chains for diameters 26 mm to 42 mm and a single Grade U3 stud‑link chain of 73 mm diameter.

Which material grades are used for the chains?

Grade U2 chains are made from carbon steel CM490, while the Grade U3 73 mm chain is made from carbon steel CM690.

What HS‑codes apply to the listed products?

HS‑codes are 7315.12 for the 73 mm U3 chain, 7315.81 for 30 mm and 32 mm U2 chains, 7315.82 for 26 mm, 36 mm and 38 mm U2 chains, and 7315.89 for the remaining U2 sizes (28 mm, 34 mm, 40 mm, 42 mm).

Which certifications does the supplier hold?

The supplier holds certifications from ten classification societies (including DNV‑GL, ABS, BV, LR) and ISO 9001, ISO 14001 and OHSAS 18001 management system certifications.

What documentation should a buyer request before ordering?

Buyers should request the mill test certificate, proof‑load test report, classification society approval documents for the specific grade, and the ISO quality system certificates.

What are typical packaging and shipping methods for these chains?

Chains are bundled, shrink‑wrapped and palletised for container loading, commonly shipped in 20‑foot or 40‑foot containers or on roll‑on/roll‑off vessels for bulk orders.

What are common Incoterms used for exporting these chains from China?

Typical Incoterms include FOB Shanghai, CIF Dubai and CIF Rotterdam, chosen according to the buyer’s preferred logistics arrangement.

What are the usual lead times for production and delivery?

Lead times are generally 30‑45 days after order confirmation, subject to verification of material certifications and proof‑load test results.