About Cdc Sa De CV - Metals Supplier in Mexico

Mexico hosts the operations of Cdc Sa De CV and currently lists seven distinct metal products in its catalogue. The catalogue covers copper wire scrap, aluminium wire scrap, copper cathodes, copper concentrate ingot, zinc concentrate ingot, lead concentrate ingot, and iron ore lumps. These items fall under HS chapters 74 (copper products), 76 (aluminium), 79 (zinc), 78 (lead), and 26 (iron ores). The supplier’s product set reflects typical primary metal feedstocks used in downstream smelting and fabricating operations. Export data shows Mexico’s metal sector frequently supplies raw and semi‑processed metals to North America, Europe and East Asia.

The copper wire scrap is specified as 99.99 % electrolytic copper and carries HS code 7404.00. Copper cathodes and copper concentrate ingots share HS code 7403.11 and are also described as electrolytic copper with 99.99 % purity. The aluminium wire scrap is listed under HS code 7602.00.00 and is presented as generic aluminium scrap wire. Zinc and lead concentrates are recorded with HS codes 7901.11 and 7801.99 respectively, each described as high‑grade ingots with minimum 99 % metal content. Iron ore lumps, classified under HS code 2601.11, are described as hematite/magnetite with iron content between 62 % and 65 %.

Product Range and Specialties of Cdc Sa De CV

The catalogue includes copper wire scrap (99.99 % Cu, HS 7404.00), copper cathodes (99.99 % Cu, HS 7403.11), and copper concentrate ingots (99 % Cu after flotation, HS 7403.11). In the aluminium sector, only aluminium wire scrap (HS 7602.00.00) is listed. Zinc and lead are offered as high‑grade concentrates (HS 7901.11 for zinc, 7801.99 for lead) with minimum 99 % purity. Iron ore lumps (HS 2601.11) are supplied with Fe 62‑65 % typical for blast‑furnace feedstock. Industry standards for these materials commonly reference assay grades such as Cu ≥ 99.9 % for electrolytic copper, Zn ≥ 99.5 % for special high‑grade zinc, and Pb ≥ 99 % for lead concentrates. Buyers usually expect material test certificates conforming to ISO 9001 quality management or independent SGS assay reports, and may request compliance with REACH or RoHS for downstream processing.

Trade and Export Information - Cdc Sa De CV

Mexico is a major exporter of primary metals, with copper scrap and cathodes frequently shipped to the United States, Canada, China and the European Union. HS chapter 74 products are subject to customs inspections that verify purity and weight, and many importers require a Certificate of Origin and a third‑party assay report. Aluminium scrap (HS 7602) is commonly used in secondary aluminium smelting and is exported to South‑East Asia and the Middle East, where buyers look for moisture content below 0.5 % and alloy‑free composition. Zinc and lead concentrates (HS 7901 and 7801) are typically sold in 20‑ft containers with bulk packaging, and buyers often ask for compliance with the International Lead and Zinc Association (ILZA) guidelines. Iron ore lumps (HS 2601) are bulk‑shipped in open‑top containers or bulk carriers, with buyers in steel‑making regions such as Brazil, South Korea and Turkey requiring a mineral assay and moisture analysis. Common Incoterms used by Mexican metal exporters include FOB Mexican port (e.g., Veracruz) and CIF destination ports, allowing buyers to plan freight and insurance accordingly.

Sourcing from Cdc Sa De CV - Buyer Guidance

Prospective buyers should request an up‑to‑date assay certificate for each metal batch, confirming the purity percentages stated in the catalogue. For copper products, a third‑party test conforming to ASTM B115 (copper purity) or equivalent is standard practice. Aluminium scrap should be accompanied by a moisture and alloy content report, often verified against EN 12384. Zinc and lead concentrates usually require a compliance statement with ILZA specifications and a safety data sheet (SDS) covering handling and transport hazards. Iron ore shipments should include a mineral composition analysis and a bulk weight certificate, especially when the Fe content is near the 62‑65 % range. Buyers are advised to confirm the supplier’s export licences, request a Certificate of Origin, and verify that packaging meets ISPM 15 phytosanitary standards for any wood pallets used.

What purity levels are offered for copper wire scrap?

The supplier lists copper wire scrap as electrolytic copper with 99.99 % purity, classified under HS 7404.00. This grade meets the typical specification for high‑purity copper feedstock.

Which HS codes apply to the listed metal products?

Copper wire scrap - 7404.00; copper cathodes and concentrate ingots - 7403.11; aluminium wire scrap - 7602.00.00; zinc concentrate - 7901.11; lead concentrate - 7801.99; iron ore lumps - 2601.11. Each code aligns with the respective product category.

What documentation should I request before purchasing copper cathodes?

Request an assay certificate meeting ASTM B115, a Certificate of Origin, and any relevant ISO 9001 quality‑management documentation. These documents verify purity and compliance with international trade standards.

How are aluminium wire scrap shipments typically packaged?

Aluminium wire scrap is usually bundled in steel drums or packed in bulk bags, with moisture content kept below 0.5 %. Packaging complies with HS 7602.00.00 labeling requirements for metal scrap.

Which markets commonly import Mexican zinc concentrate?

Major importers include China, the European Union and South Korea. Buyers in these regions often require ILZA‑compliant assay reports and a safety data sheet.

What are the typical lead time and minimum order quantities for iron ore lumps?

Lead times generally range from 30 to 45 days after order confirmation. Minimum orders are typically one full 20‑ft container, approximately 20 metric tons of iron ore lumps.

Are there any standard certifications buyers should verify for these metal products?

While the supplier’s specific certifications are not listed, buyers usually ask for ISO 9001, independent SGS assay reports, and compliance with REACH or RoHS where applicable to ensure quality and regulatory adherence.

What Incoterms are most frequently used for exporting these metals from Mexico?

Exporters commonly use FOB from Mexican ports such as Veracruz and CIF to the buyer’s destination port. These terms define responsibilities for freight, insurance and customs handling.