About Bindlas International Ltd. - Paper Products Supplier in India

Bindlas International Ltd. is based in India and currently lists six active product lines. The catalogue covers paper products such as duplex boards, coated paper, speciality paper, hygiene products, writing and printing A4 paper, and kraft paper. These items fall under HS chapter 48, which classifies paper, paperboard and related articles. The supplier’s top categories include paper products, paper boards, tissue paper, printing paper and kraft paper. The product set reflects typical Indian exporters that serve both domestic and overseas paper markets.

The duplex boards offered are uncoated multi‑layer boards commonly supplied in grammages between 200 g/m² and 400 g/m². Coated paper is usually provided with a surface gloss of 30 - 70 gloss units and brightness of 80 - 90 ICRU. Speciality paper may include heat‑set, carbonless or security grades, each with defined basis weight and surface treatment. Hygiene products refer to bulk tissue sheets with moisture content below 8 %. The A4 writing and printing paper follows ISO 216 dimensions with a basis weight of 80 g/m², while kraft paper is supplied in brown grades ranging from 70 g/m² to 120 g/m².

Product Range and Specialties of Bindlas International Ltd.

The six catalogued items span the main segments of the paper industry. Duplex boards are used for packaging and book covers, typically manufactured from virgin fibre with a burst strength of 6 kPa. Coated paper serves high‑gloss printing applications and is often finished with a mineral coating that provides a smooth surface for offset presses. Speciality papers include variants such as thermal paper, carbonless copy paper and security‑grade paper, each requiring specific additives and controlled fibre composition. Hygiene products mainly consist of tissue rolls designed for low‑fluff, high‑absorbency performance, usually delivered in bulk on plastic cores. Writing and printing A4 paper is produced in standard ISO 216 size, with a typical brightness of 85 ICRU and a tensile strength of 30 N/10 mm. Kraft paper is a brown, high‑tear‑resistance grade, frequently used for wrapping and bag making, with typical basis weights of 70‑120 g/m² and a tear resistance of 4 - 6 kN·m⁻¹.

Trade and Export Information - Bindlas International Ltd.

India ranks among the top global exporters of paper and paperboard, with major shipments directed to the Middle East, Africa, Southeast Asia and Europe. Exported paper products are classified under HS codes 4802 (paper, uncoated) and 4806 (paper, coated) as well as 4805 for paperboards, which align with the supplier’s duplex boards and kraft paper. Buyers usually require certifications such as FSC (Forest Stewardship Council), ISO 9001 for quality management and ISO 14001 for environmental management, although the specific supplier’s certificates are not listed in the provided facts. Standard export packaging includes bales for board products, bulk rolls for tissue and paper, and corrugated cartons for A4 sheets, typically loaded in 20‑ft or 40‑ft containers under CIF or FOB terms. Indian paper exporters must comply with destination country phytosanitary and customs regulations, and many importers request a pre‑shipment inspection report issued by a recognized agency.

Sourcing from Bindlas International Ltd. - Buyer Guidance

When sourcing paper from Bindlas International Ltd., buyers should request a product data sheet that lists basis weight, brightness, grammage, moisture content and tensile strength for each paper grade. Samples in the form of small sheets or roll sections allow verification of surface finish, colour consistency and printability before placing a bulk order. In the absence of listed certifications, buyers are advised to ask for FSC or ISO audit reports, as well as a recent laboratory test report covering the parameters mentioned above. Verification of packaging dimensions, container loading plans and the supplier’s compliance with Incoterms such as FOB or CIF helps align logistics expectations.

What paper categories does Bindlas International Ltd. list in its catalogue?

The catalogue includes duplex boards, coated paper, speciality paper, hygiene (tissue) products, writing and printing A4 paper, and kraft paper, covering six distinct product lines.

How many active product lines are currently offered?

The supplier lists six active product lines, as indicated in the provided facts.

Are there any standard certifications that buyers should request for these paper products?

Buyers should typically request FSC certification for sustainable sourcing and ISO 9001 or ISO 14001 audit reports, which are common requirements for paper exports from India.

What are the typical specifications for the A4 writing and printing paper?

A4 paper is usually supplied in ISO 216 size with a basis weight of 80 g/m², brightness around 85 ICRU and a tensile strength of about 30 N per 10 mm.

What packaging formats are used for the hygiene (tissue) products?

Hygiene products are generally rolled on plastic cores and packed in bulk cartons or shrink‑wrapped bundles, suitable for container loading.

Which HS codes generally apply to the supplier’s paper products?

Indian paper exporters commonly use HS 4802 for uncoated paper, HS 4806 for coated paper, and HS 4805 for paperboards, which correspond to the supplier’s product range.

What lead times are typical for paper shipments from India?

Lead times for paper shipments from India usually range from 30 to 45 days, depending on product type, order size and required certifications.

How can a buyer request a sample before placing a full order?

Buyers can request a small sample pack or roll through the supplier’s trade platform, specifying the desired grade, and the supplier will ship the sample under a nominal cost or on a FOB basis.