About Anping Walter Hardware Wire Mesh Products Co., Ltd. - Wire Mesh Supplier in China

China, specifically the Anping region, hosts five active product listings from Anping Walter Hardware Wire Mesh Products Co., Ltd. The catalogue includes perforated metal mesh, expanded metal mesh (HS code 7314.50, material carbon steel or stainless steel 304), coil mesh, corner mesh (HS code 7314.31, galvanized steel), and generic metal mesh. Each entry falls under the HS‑4 heading 7314, which covers fabricated metal mesh products. The supplier is classified as an imported, harbor‑tier supplier. The product set aligns with the top categories of metal scraps, wire mesh, and metal wire.

The five listings span common hardware wire mesh applications in construction, filtration, and industrial equipment. Product titles are presented without additional specifications, indicating that detailed grades, dimensions, and finish options are to be negotiated with the buyer. The presence of both carbon‑steel and stainless‑steel materials suggests the ability to serve corrosion‑sensitive projects as well as standard structural uses.

Product Range and Specialties of Anping Walter Hardware Wire Mesh Products Co., Ltd.

The catalogue lists perforated metal mesh, expanded metal mesh, coil mesh, corner mesh and a generic metal mesh. In the metal‑mesh industry, perforated sheets are typically offered in thicknesses from 0.5 mm to 5 mm with opening sizes between 2 mm and 20 mm, conforming to ASTM A123 for zinc coating or ASTM A240 for stainless steel. Expanded metal mesh is produced by shear‑cut and stretch processes, usually with expansion ratios of 2:1 to 8:1 and thicknesses from 0.6 mm to 3 mm, meeting ASTM A672 for carbon steel and ASTM A240 for stainless‑steel 304. Coil mesh is supplied in coils of 500 mm to 1500 mm width, while corner mesh, made from galvanized steel, follows ASTM A123 zinc‑coating standards and is often used for reinforcement edges. Typical industry grades include commercial‑grade carbon steel (Yield ≈ 250 MPa) and food‑grade stainless steel 304 (Yield ≈ 215 MPa).

Trade and Export Information - Anping Walter Hardware Wire Mesh Products Co., Ltd.

China is a leading exporter of fabricated metal mesh under HS chapter 73, especially heading 7314. Major importing regions include Southeast Asia, the European Union and North America, where the mesh is used in construction, automotive and filtration sectors. Buyers usually require ISO 9001 quality‑management certification, CE marking for EU markets, and compliance with ASTM or EN standards; these documents are often verified by third‑party inspectors such as SGS or Bureau Veritas. Export shipments are commonly packed on Euro‑pallets or in 20‑ft/40‑ft containers, with FOB Shanghai or CIF European ports as the prevailing Incoterms.

Sourcing from Anping Walter Hardware Wire Mesh Products Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request a mill test report that details chemical composition, tensile strength (≥ 350 MPa for carbon‑steel mesh) and zinc‑coating thickness where applicable. Verify that the product matches the HS code listed (7314.50 for expanded mesh, 7314.31 for galvanized corner mesh) and that any applicable certifications (ISO 9001, CE) are provided before order confirmation. Typical minimum order quantities range from 500 kg to one full container load, with lead times of 20‑35 days after final specifications are approved; a 1 m² sample with accompanying test data is standard practice for quality validation.

What are the typical dimensions and opening sizes for the perforated metal mesh?

Perforated mesh is commonly supplied in sheet widths of 1000 mm to 1500 mm, thicknesses from 0.5 mm to 5 mm, and circular or square openings ranging from 2 mm to 20 mm. The product usually conforms to ASTM A123 specifications for coating and dimensional tolerance.

Which material standards apply to the expanded metal mesh listed under HS 7314.50?

The expanded mesh is produced from carbon steel or stainless‑steel 304 and is generally manufactured to ASTM A672 for carbon steel and ASTM A240 for stainless steel. Expansion ratios typically vary between 2:1 and 8:1, with thicknesses from 0.6 mm to 3 mm.

What certification documents should a buyer request for the galvanized corner mesh (HS 7314.31)?

Buyers should request a mill test report, a zinc‑coating thickness certificate in line with ASTM A123, and the supplier’s ISO 9001 quality‑management certificate. These documents confirm material grade and corrosion protection.

What is the usual minimum order quantity for coil mesh?

Suppliers commonly set a MOQ of 500 kg, which corresponds to roughly one standard 20‑ft container load depending on coil width and thickness. Smaller quantities may be accepted for sample or prototype orders.

How are the mesh products typically packaged for export?

Products are coiled or stacked, wrapped in moisture‑resistant film, banded and placed on Euro‑pallets. Full container loads are secured with strapping to meet IEC 62837 handling standards.

Which Incoterms are most frequently used for shipping Chinese metal mesh?

FOB Shanghai and CIF European ports are the prevailing terms, allowing buyers to arrange inland transport or receive door‑to‑door service. These terms accommodate the typical container sizes used for metal‑mesh shipments.

What testing is normally performed on the metal mesh before shipment?

Standard tests include tensile strength (≥ 350 MPa for carbon steel), a salt‑spray corrosion test per ASTM B117, and dimensional verification of mesh opening size. Test results are documented in the mill test report.

Can samples be provided before a full order?

Suppliers generally supply a 1 m² sample cut from the production batch, accompanied by the relevant test report and material certificate. Samples allow the buyer to verify opening size, thickness and coating quality before committing to larger volumes.