About Anping Shengxiang Metal Products Co., Ltd - Steel Wires Supplier in China

Anping Shengxiang Metal Products Co., Ltd is based in China and currently lists seven active products. The catalogue includes galvanized wire, brass wire, cut wire, test sieves, filter discs, black wire cloth and wire containers, covering the top categories of Steel Wires, Brass Wires, Iron Wire, Scientific Instruments, Industrial Filters and Wire Mesh. These items fall under the HS‑73 family for steel products and HS‑74 for copper/brass items, while the scientific instruments and filter products are classified in the HS‑90 and HS‑84 chapters respectively. The supplier is marked as an imported tier with a harbor trust level, indicating that it is a recognized exporter in Chinese trade portals. The product list reflects a focus on raw wire forms and ancillary filtration components rather than finished assemblies.

The seven entries are presented without additional specifications such as diameter or tensile rating, which are typical details buyers request for wire products. Each wire type is likely to be supplied in standard industrial diameters ranging from 0.2 mm to 5 mm, while the filter discs and test sieves are commonly offered in diameters of 100 mm to 300 mm. The black wire cloth and wire containers are usually manufactured as mesh panels or cylindrical baskets for industrial filtration and material handling. No certifications are declared in the supplied data, so buyers should verify compliance with relevant standards before purchase. The supplier’s product mix suggests service to sectors such as construction, automotive parts, and laboratory equipment.

Product Range and Specialties of Anping Shengxiang Metal Products Co., Ltd

The catalogue shows three wire products - galvanized steel wire, brass wire and cut wire - which are typical raw materials for fastening, reinforcement and spring applications. In the steel wire market, galvanized wires are often produced to ASTM A578 or ISO 9001‑based specifications with tensile strengths between 350 MPa and 600 MPa and coating thicknesses of 30‑80 µm. Brass wires are usually supplied to ASTM B221 standards, featuring copper‑zinc alloys with conductivity around 28 % IACS and tensile strengths of 250‑350 MPa. Cut wire generally refers to pre‑cut lengths for tie‑down or mesh manufacturing, commonly offered in lengths of 10 m to 100 m per coil. The filter‑related items - test sieves, filter discs, black wire cloth and wire containers - belong to the industrial filtration segment where mesh openings are expressed in microns (e.g., 20 µm to 200 µm) and wire diameters in the range of 0.1 mm to 0.5 mm. Typical material grades include stainless steel 304/316 for corrosion resistance or carbon steel with anti‑corrosive coatings for less demanding environments. Buyers often request product data sheets that list aperture size, opening count per square inch, and maximum operating temperature.

Trade and Export Information - Anping Shengxiang Metal Products Co., Ltd

China is a major exporter of metal wire and filtration products, with the majority of shipments destined for Southeast Asia, Europe and North America. Steel wire under HS‑73 and brass wire under HS‑74 are frequently used in construction, automotive manufacturing and electrical equipment, while scientific instruments and industrial filters classified under HS‑90 and HS‑84 serve laboratory, pharmaceutical and food‑processing industries. Export logistics for wire products typically involve 20‑ft or 40‑ft containers, packed in bulk coils or on wooden pallets with moisture‑resistant wrapping to prevent corrosion. Commonly required certifications for Chinese wire exporters include ISO 9001 quality management, CE marking for EU markets, and, where applicable, ASTM test reports. Importing countries often inspect these goods under the World Customs Organization’s Harmonized System rules, checking for accurate HS code declaration, material composition and compliance with safety standards such as REACH in the EU or ASTM F1140 for filtration media.

Sourcing from Anping Shengxiang Metal Products Co., Ltd - Buyer Guidance

When sourcing galvanized or brass wire from this supplier, request a material test report that confirms chemical composition, tensile strength and coating thickness according to ASTM A578 or ASTM B221. Samples should be examined for uniform diameter, surface finish and any visible defects before confirming bulk orders. For the filtration products, ask for pore‑size distribution data, mesh opening count and material certification (e.g., stainless‑steel grade 304 L) to ensure suitability for the intended application. Verify that the supplier can provide packaging details, such as coil wrapping for wires or cardboard boxes with moisture‑proof liners for sieves, to protect the goods during transit. Because no certifications are listed, buyers should obtain copies of any ISO or CE certificates the supplier holds, and confirm that the export documentation matches the HS codes used for customs clearance.

What wire diameters are available for the galvanized and brass wires?

The supplier lists galvanized and brass wires without specific diameters; typical industrial suppliers in China offer diameters from 0.2 mm up to 5 mm, so buyers should request a size chart or sample range before ordering.

Are tensile strength or coating thickness specifications provided?

No tensile or coating data are included in the catalogue. Buyers should ask for ASTM‑based test reports that detail tensile strength (e.g., 350‑600 MPa for steel) and galvanizing thickness (30‑80 µm) for verification.

What are the standard sizes for the test sieves and filter discs?

The catalogue does not state dimensions; standard test sieves are commonly supplied in diameters of 100 mm, 150 mm or 200 mm, while filter discs often range from 100 mm to 300 mm in diameter with mesh openings measured in microns.

Which certifications should a buyer request for these metal products?

Typical certifications include ISO 9001 for quality management, CE marking for EU markets, and ASTM test reports for wire specifications; buyers should request copies of any such certificates the supplier holds.

How are the wire products usually packaged for export?

Export shipments of wire are usually coiled and wrapped in moisture‑resistant film, then placed on wooden pallets or in 20‑ft/40‑ft containers; the supplier should confirm packaging details to avoid corrosion during transit.

What are the common HS codes for these items?

Steel wires fall under HS 73.31, brass wires under HS 74.15, and filtration products such as test sieves and filter discs are generally classified under HS 84.69 for industrial filters and HS 90.03 for scientific instruments.

What lead times and minimum order quantities are typical for these products?

While the catalogue does not list MOQ or lead time, Chinese wire exporters often require minimum orders of 1 ton for bulk wire and 500 units for mesh or sieve items, with production lead times ranging from 15 to 30 days after sample approval.

How can a buyer obtain a sample before placing a full order?

Buyers should contact the supplier to request a small quantity sample of each wire or filter product, specifying the required dimensions and standards; the supplier can then arrange shipment, usually via air freight for rapid evaluation.