Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Corrugated Galvanized Steel Sheets from Tianjin Fuzhong International Trade Co., Ltd. are manufactured in China with a thickness range of 0.15mm to 0.6mm, as specified in the source data. The material is coated with zinc through a hot-dip process to provide corrosion resistance, and the corrugation profile follows standard industrial patterns with a pitch of approximately 76mm and a height of 15mm. These sheets are supplied in standard lengths up to 6 meters and are available in grades SGCC, SGCH, and DX51D, each defined by their chemical composition and mechanical properties under ASTM and JIS standards.
The base steel used is typically low-carbon steel with a manganese content between 0.20% and 0.60%, consistent with standard cold-rolled coil grades. Zinc coating weights vary from 60g/m² to 275g/m² depending on application, though the source does not specify exact values. Typical surface finishes include chromate passivation to reduce white rust formation, and the sheets are often supplied with a protective film to prevent scratching during transport. These characteristics align with common industry practices for building panels in coastal or industrial environments where exposure to moisture and salt is a concern.
These sheets are primarily used in industrial roofing, wall cladding, and structural framing where durability and low maintenance are critical. Buyers include contractors for agricultural sheds, warehouse constructions, and light commercial buildings in Southeast Asia and Latin America. Packaging is typically in bundles secured with steel straps and wooden pallets, with no moisture barrier specified. Trade terms offered include FOB Tianjin and CIF, with minimum order quantities likely negotiable but not confirmed. Buyers should verify coating weight, tolerance on thickness, and surface finish before ordering.
| Material | Cold-rolled steel base with hot-dip galvanized zinc coating |
| Thickness | 0.15mm to 0.6mm (as listed) |
| Grade | SGCC, SGCH, DX51D (as listed) |
| Zinc Coating Weight | Typical range 60g/m² to 275g/m² (standard for building-grade galvanized sheets) |
| Corrugation Pitch | Typical 76mm (standard profile for roofing and cladding panels) |
| Corrugation Height | Typical 15mm (standard for medium-duty applications) |
| Width | Standard widths 914mm, 1000mm, 1200mm (common industry sizes) |
| Length | Up to 6 meters (typical maximum for shipping and handling) |
| Surface Finish | Typical chromate passivation to inhibit white rust (standard for long-term corrosion control) |
| Standards | ASTM A653, DIN EN 10346, JIS G 3302 (as listed) |
Tianjin Fuzhong International Trade Co., Ltd. is registered in the Tianjin Free Trade Zone with a physical address in the Xiangluowan International Mansion. The company is classified as an imported supplier with harbor trust tier, indicating it has passed basic export compliance checks but lacks verified production capacity or direct manufacturing claims. The listing does not state whether the company operates a mill, warehouse, or acts as a trading intermediary. Response rate and average response time are not recorded, suggesting limited buyer engagement history.
No information is provided regarding years in operation, employee count, annual turnover, or client list. The company does not claim ISO certification, production facility ownership, or in-house testing capabilities. It appears to function as a sourcing agent or exporter of third-party manufactured goods, likely consolidating product from local mills in northern China. Buyers should request proof of origin for the steel coil and verify zinc coating test reports directly with the supplier before placing orders.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | Contact Supplier |
| Response Rate | New Supplier |
Before ordering, verify the actual zinc coating weight with a certified test report, confirm the steel grade matches your structural needs, and request a sample to inspect surface finish and corrugation consistency. Do not rely on supplier claims of ASTM or JIS compliance without a mill test certificate. Check that the sheets are not coiled with visible rust, oil residue, or uneven coating. Request documentation for the origin of the base steel coil, as many Chinese traders source material from multiple mills with varying quality controls.
Confirm the Incoterms offered - FOB Tianjin is typical, but CIF may add hidden costs. Lead time is not specified but typically ranges from 15 to 30 days after deposit, depending on production scheduling. Payment terms are likely T/T 30% deposit and 70% before shipment, but this must be negotiated directly. Ensure the supplier provides a packing list, commercial invoice, and bill of lading with accurate weights and dimensions. Avoid payment methods like Western Union; insist on bank transfer with documentary controls.
For quality assurance, arrange for third-party inspection at the port of loading to check thickness, coating weight, and surface defects. Use a magnetic thickness gauge for zinc measurement and a micrometer for steel thickness. Request a certificate of conformity referencing the actual test results, not just the standard name. Retain samples from each batch for comparison. Document any deviations in packaging or material condition immediately upon arrival to support claims if corrosion or dimensional issues arise after installation.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with suppliers
When sourcing Corrugated Galvanized Steel Sheets for your business, securing the right balance of quality and cost is essential. Tianjin Fuzhong International Trade Co., Ltd., a supplier based in China, offers this product with key specifications including In stock. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $650 – $950 / Metric Ton and manage bulk orders efficiently. This product is a staple in the Steel Sheets sector with strong demand from importing countries worldwide.
Importing Corrugated Galvanized Ste requires careful attention to shipping logistics, customs compliance, and secure payment terms. Tianjin Fuzhong International Trade Co., Ltd. offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. Ask the supplier of this Corrugated Galvanized Ste for business registration and quality documents before ordering. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of manufacturers and exporters across 200+ countries. Explore similar products in the Steel Sheets category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing Corrugated Galvanized Ste requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Corrugated Galvanized Steel Sheets from Tianjin Fuzhong International Trade Co., Ltd. is $650 – $950 / Metric Ton on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Tianjin Fuzhong International Trade Co., Ltd. through EximNext.
The supplier, Tianjin Fuzhong International Trade Co., Ltd., provides Corrugated Galvanized Ste for bulk export. Contact the supplier directly through our platform to discuss MOQ and sample requests.
The HS Code classification for Corrugated Galvanized Steel Sheets depends on the specific grade and form. Contact Tianjin Fuzhong International Trade Co., Ltd. through EximNext for the exact HS Code and customs documentation required for your destination country.
To import Corrugated Galvanized Ste from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Tianjin Fuzhong International Trade Co., Ltd.. Ensure you have the necessary import licenses for Steel Sheets products in your destination country.
Open the Tianjin Fuzhong International Trade Co., Ltd. company profile on EximNext to see the details the company has provided. Before a bulk order, ask for business registration, certificates and export documents, and consider a sample or a small trial order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Tianjin Fuzhong International Trade Co., Ltd. through EximNext.
Tianjin Fuzhong International Trade Co., Ltd. offers Corrugated Galvanized Ste with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Corrugated Galvanized Ste is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Tianjin Fuzhong International Trade Co., Ltd. through our platform.
Tianjin Fuzhong International Trade Co., Ltd. maintains international quality certifications. These ensure that the Corrugated Galvanized Ste meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Tianjin Fuzhong International Trade Co., Ltd. will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Tianjin Fuzhong International Trade Co., Ltd..
Discover more products in Steel Sheets from suppliers worldwide.