Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Core veneer from Vtp Tec Jsc is rotary-cut or sliced thin wood material used as the central structural layer in plywood and engineered panel production. The listing specifies eucalyptus, acacia and mixed hardwood as raw material species, with sheet dimensions of 1270 mm by 640 mm and nominal thickness options of 1.7, 1.8, 2.0, 2.1 and 2.2 mm. Moisture content is stated at 15 to 18 percent, a range typical for veneer destined for glue lamination in plywood manufacture. The grade mix options range from 100 percent grade A through combinations with grade B to 100 percent grade B, allowing buyers to match material quality to end-product structural requirements and cost targets.
Eucalyptus and acacia species common to Vietnamese plantation forestry provide veneer with density and bonding characteristics suited to interior-grade and select structural plywood applications. The 1270 mm by 640 mm dimension format is standard for core layer assembly in metric-system markets, with the shorter dimension allowing cross-band or same-grain layup depending on panel construction. Thickness tolerance and within-sheet variation are critical for uniform glue spread and press cycle efficiency; buyers should request thickness tolerance specification in millimetres or as a percentage of nominal. The 15 to 18 percent moisture content sits at the upper end of the typical 8 to 15 percent target for tropical veneer exports, so drying to customer specification and moisture uniformity across the load should be confirmed with Vtp Tec Jsc.
This core veneer serves plywood mills, laminated board manufacturers and furniture substrate producers requiring consistent layup material. The pallet packing option at approximately 42 cubic metres with 10 percent tolerance, or loose packing at approximately 45 cubic metres with 10 percent tolerance, affects container utilisation and unloading method at the destination. Buyers should clarify whether pallet material is ISPM-15 compliant for international shipment, and whether edge protectors or strapping specification is provided. Payment terms, minimum order quantity, lead time and certificate of origin issuance must be confirmed directly with Vtp Tec Jsc, as these are not stated in the source data. The supplier's registered address is in Cau Giay, Hanoi, with operational presence linked to Vietnamese timber processing regions.
| Wood species | Eucalyptus, acacia, mixed hardwood |
| Sheet dimensions | 1270 mm x 640 mm |
| Nominal thickness options | 1.7 / 1.8 / 2.0 / 2.1 / 2.2 mm |
| Moisture content | 15% - 18% |
| Typical thickness tolerance | +/- 0.1 to +/- 0.2 mm (standard rotary-cut veneer; confirm with supplier) |
| Typical veneer cut | Rotary cut (standard for core veneer; confirm with supplier) |
| Grade options | 100% A / 90% A + 10% B / 80% A + 20% B / 100% B |
| Pallet packing volume | 42 cbm (+/- 10%) |
| Loose packing volume | 45 cbm (+/- 10%) |
| Typical density range (eucalyptus) | 450 - 600 kg/m³ at 12% moisture (standard plantation hardwood; confirm with supplier) |
Vtp Tec Jsc is registered at Room 1002, Block 2, N07-B3 Building, Dich Vong Ward, Cau Giay District, Hanoi, Viet Nam. The supplier holds an 'imported' tier and 'harbor' trust classification. No response rate data is recorded, and average response hours show zero, indicating limited platform communication history. The available profile does not include information about establishment year, mill location relative to the Hanoi registered address, number of employees, annual production volume, or export destinations previously served.
The company offers core veneer in mixed hardwood species with flexible grade sorting, suggesting supply chain access to Vietnamese plantation and/or natural forest resources. The listing does not state whether Vtp Tec Jsc operates its own rotary lathe facility or sources from sub-contracted mills. Buyers should request mill audit access, chain of custody documentation if FSC or legal timber verification is required, and sample approval protocols before committing to volume orders. The supplier does not list specific certifications, environmental compliance statements, or customer reference information in the available data.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | Contact Supplier |
| Response Rate | New Supplier |
Before ordering core veneer from Vtp Tec Jsc, request representative samples of each grade and thickness you intend to purchase, with species clearly identified. Test the samples for moisture content using a calibrated meter, measure actual thickness at multiple points, and conduct a small-scale glue bond test with your intended adhesive system. Verify that the supplier can provide phytosanitary certificate, certificate of origin, and fumigation documentation required by your country's import regulations. If chain of custody or legal timber verification is mandated by your market, request evidence of compliance with Vietnamese timber legality requirements or FSC certification status.
Shipping terms for Vietnamese wood products typically operate from Hai Phong Port, though confirmation with Vtp Tec Jsc is essential. Sea freight to East Asian destinations takes 7 to 14 days, to European ports 30 to 45 days, and to North American west coast 20 to 30 days. Ask whether the supplier quotes FOB, CIF or CFR terms, and who arranges marine insurance. Payment structures common in Vietnamese wood product trade include 30 percent deposit with 70 percent against shipping documents, or documentary credit for initial transactions. Escrow or secure payment through a verified trade service may be preferable given the limited response history available. Confirm whether the 42 cbm pallet packing or 45 cbm loose packing better suits your unloading equipment and warehouse layout.
Quality inspection for imported veneer should include pre-shipment at the mill or loading warehouse. Engage an independent inspection agency to verify moisture content with a calibrated pin meter on a representative sample, check thickness with a micrometer at multiple sheet positions, and assess grade sorting against an agreed sample seal. On arrival, inspect for moisture gain during transit, mechanical damage from improper lashing, and mould if ventilation was inadequate. Document any discrepancy immediately for insurance or supplier claim purposes. Store veneer in a covered, ventilated space with moisture protection from ground contact, and rotate stock to prevent sticker stain or warp before processing into plywood layup.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with suppliers
When sourcing Best Price Core Veneer for your business, securing the right balance of quality and cost is essential. Vtp Tec Jsc, a supplier based in Viet Nam, offers this product with key specifications including In stock. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $420 – $560 / Metric Ton and manage bulk orders efficiently. This product is a staple in the Veneer sector with strong demand from importing countries worldwide.
Importing Best Price Core Veneer requires careful attention to shipping logistics, customs compliance, and secure payment terms. Vtp Tec Jsc offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading online B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. Ask the supplier of this Best Price Core Veneer for business registration and quality documents before ordering. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of manufacturers and exporters across 200+ countries. Explore similar products in the Veneer category and connect with top-tier exporters on our comprehensive B2B marketplace. Start your sourcing journey today.
Importing Best Price Core Veneer requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Best Price Core Veneer from Vtp Tec Jsc is $420 – $560 / Metric Ton on FOB terms from Viet Nam. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Vtp Tec Jsc through EximNext.
The supplier, Vtp Tec Jsc, provides Best Price Core Veneer for bulk export. Contact the supplier directly through our platform to discuss MOQ and sample requests.
The HS Code classification for Best Price Core Veneer depends on the specific grade and form. Contact Vtp Tec Jsc through EximNext for the exact HS Code and customs documentation required for your destination country.
To import Best Price Core Veneer from Viet Nam, negotiate shipping terms (FOB, CIF, or EXW) directly with Vtp Tec Jsc. Ensure you have the necessary import licenses for Veneer products in your destination country.
Open the Vtp Tec Jsc company profile on EximNext to see the details the company has provided. Before a bulk order, ask for business registration, certificates and export documents, and consider a sample or a small trial order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Vtp Tec Jsc through EximNext.
Vtp Tec Jsc offers Best Price Core Veneer with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Best Price Core Veneer is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Vtp Tec Jsc through our platform.
Vtp Tec Jsc maintains international quality certifications. These ensure that the Best Price Core Veneer meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Vtp Tec Jsc will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Vtp Tec Jsc.
Discover more products in Veneer from suppliers worldwide.