Import 5hp Water Cooled Scroll Chiller — Buy in wholesale FOB from Supplier in China

The Hailingke 5HP water-cooled scroll chiller is a compact refrigeration unit that rejects process heat through a water-cooled condenser rather than ambient air, making it suitable for installations where outdoor noise or space constraints rule out air-cooled alternatives. The machine is driven by a 5HP motor with IP23 and IP54 protection ratings and F-class insulation, the same electrical platform used across the supplier's small-horseholder range. Water-cooled condensers in this class typically use shell-and-tube or plate-type heat exchangers fed by cooling-tower water or a municipal chilled-water loop, allowing the compressor to operate at lower head pressures than air-cooled equivalents and therefore consume less electricity per ton of refrigeration. The compact footprint mentioned in the source description suggests a packaged design with compressor, evaporator and condenser on a common skid, though buyers should confirm whether the cooling-water pump and reservoir are integrated or separate.

Scroll compressors at the 5HP scale are almost exclusively hermetic or semi-hermetic orbiting-scroll designs from manufacturers such as Copeland, Panasonic or absorbed into Chinese brands under licence. The scroll mechanism offers fewer moving parts than reciprocating compressors, translating into lower vibration and maintenance demands. Water-cooled operation allows the condensing temperature to track the wet-bulb temperature rather than the dry-bulb, so in humid climates the efficiency advantage over air-cooled systems can be substantial. F-class insulation on the motor permits continuous operation at loads up to the service factor without insulation degradation. The IP54 rating on electrical enclosures is particularly important in pharmaceutical and food-processing halls where wash-down protocols are mandatory.

Primary applications include HVAC secondary loops, plastic injection-moulding temperature control, pharmaceutical reactor cooling and food-processing pasteuriser circuits. The chiller is normally positioned in a plant room or mezzanine with piped access to a cooling tower or borehole supply. Buyers in the plastics industry should verify that the chilled-water outlet temperature can be set low enough for their mould-tempering requirements, typically 5 °C to 15 °C. Trade terms from this Shenzhen-based exporter are quoted as CIF or T/T, though the latter is a payment method rather than a delivery term; clarify with the supplier whether they offer FOB, CFR or DAP alternatives. Minimum order quantities are described as flexible, but no figure is given, so negotiate directly for pilot or bulk quantities.

Hailingke Refrigeration Co., Ltd. maintains its registered address in Songgang, Baoan District, Shenzhen, Guangdong Province, placing it within one of China's most concentrated electronics and light-manufacturing corridors. The supplier is classified at the Harbor trust tier, which provides basic identity verification but does not constitute an audited quality-assurance credential. Platform data shows a 0.00 percent response rate and zero recorded average response hours, signalling that the company has not yet established a reliable enquiry-handling track record through this channel. Prospective buyers should therefore initiate contact via multiple methods, telephone and email, to gauge responsiveness before relying on the platform messaging alone.

No information is provided in the source material about the year of establishment, factory floor area, number of employees, annual production volume, or named reference customers. The profile does not list specific ISO, CE or other certification numbers, so buyers must request current certificates and scope statements during negotiations. The company's product range appears to span oil cooling chillers and water-cooled scroll chillers, but the depth of its engineering capability, whether it designs heat exchangers in-house or sources them from sub-suppliers, and its after-sales service network outside China are all unknowns that require direct confirmation. A factory visit or third-party audit is advisable given the limited disclosed credentials.