Import H Beam — Buy in Bulk from Supplier in China

Rizhao Haijun Steel in Shandong, China manufactures rolled H‑beam sections for structural use. The beams are supplied in a range of heights, flange widths and web thicknesses to match project requirements. Each profile is fabricated from steel that meets the relevant ISO quality standards. The supplier states that the beams are designed for high load‑bearing capacity and structural stability. Production is carried out at the Guihe Edifice facility on Yantai Road, Rizhao.

Typical material grades for these beams are Q235 and Q345, with a yield strength of at least 250 MPa for Q235 and 355 MPa for Q345. Standard dimensions follow the GB/T 707‑2008 catalogue, for example a 200 mm × 100 mm × 6 mm section weighs about 20 kg per metre. Tolerances are usually ±2 mm on depth and flange width and ±0.5 mm on thickness, which aligns with industry practice. Beams are normally delivered in bundled packs of 10 metre lengths, wrapped in protective film to prevent corrosion. The supplier notes that the steel undergoes ultrasonic testing and visual inspection before dispatch.

The beams are commonly used in commercial buildings, bridges and industrial facilities where robust load‑bearing capacity is essential. Buyers should verify the grade, dimensions and ISO test reports with Rizhao Haijun Steel and arrange Incoterms and payment terms directly.

Rizhao Haijun Steel is located at Guihe Edifice, No.207 Yantai Road, Rizhao 276800, Shandong, China. It is classified as an imported supplier with a harbor trust tier, indicating compliance with customs and port regulations. The profile shows a response rate of 0.00 and no average response time recorded, suggesting that inquiries may need proactive follow‑up.

The company specialises in producing structural steel sections, including H‑beams, and ships directly from its own facilities. Apart from the ISO certifications mentioned in the product data, no additional certifications are listed. Prospective buyers should request current mill test certificates and arrange a factory audit to confirm production capabilities.