Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›The 6mm pitch full color indoor LED display from Shenzhen Topvision Optoelectronic Technology Co., Ltd is built around a 6mm pixel pitch matrix, producing a pixel density of approximately 27,778 dots per square metre. The module delivers full-colour RGB reproduction through surface-mount device (SMD) packaging, with each pixel comprising one red, one green and one blue LED chip. Typical brightness for indoor-grade panels of this pitch sits in the 1,000 to 1,500 nits range, with contrast ratios commonly exceeding 3,000:1. The refresh rate is normally 1,920 Hz or higher to eliminate scan-line artefacts on camera, and the unit accepts standard signal inputs such as HDMI, DVI and SDI through a receiving card architecture.
Construction relies on die-cast aluminium or extruded aluminium cabinet frames, keeping module weight to roughly 8 to 12 kg per panel and total depth under 80 mm. Power consumption at full white typically ranges from 400 to 800 W per square metre, dropping to 200 to 400 W for average content through dynamic power management. The driver ICs are usually constant-current multi-switch devices with 16 to 24 outputs, supporting 14 to 16-bit colour depth per channel. Viewing angles are standard at 140 to 160 degrees horizontal and vertical, with a flatness tolerance of less than 0.5 mm across module joints to avoid visible seams.
This display category serves rental-staging companies, broadcast studios, corporate briefing centres and retail installations where viewers stand 5 to 15 metres from the screen. Common configurations include 500 mm x 500 mm or 500 mm x 1000 mm cabinets, stackable for curved or flat walls. Buyers should confirm with Shenzhen Topvision Optoelectronic Technology Co., Ltd whether the quoted price includes receiving cards, power supplies and hanging bars, or if these are line-item extras. Lead time, exact MOQ and accepted Incoterms are not stated in the source data and must be verified directly with the supplier.
| Pixel Pitch | 6 mm (nominal) |
| Pixel Density | 27,778 dots/m² (standard for 6 mm pitch) |
| Brightness | 1,000 to 1,500 nits (typical indoor grade) |
| Refresh Rate | 1,920 Hz minimum (standard broadcast specification) |
| Colour Depth | 14 to 16 bit per RGB channel (typical driver IC capability) |
| Viewing Angle | 140 to 160 degrees horizontal / vertical (typical SMD LED) |
| Cabinet Material | Die-cast or extruded aluminium (standard indoor construction) |
| Module Weight | 8 to 12 kg per panel (typical for 500 mm x 500 mm format) |
| Power Consumption (Full White) | 400 to 800 W/m² (typical range, content-dependent) |
| Signal Input | HDMI, DVI, SDI via receiving card (standard interface suite) |
Shenzhen Topvision Optoelectronic Technology Co., Ltd is located in Bao An District, Shenzhen, within the Xin Hao Shen Hi-Tech Park in Fu Yong Town. The supplier address is Building No.1, Xin Hao Shen Hi-Tech Park, Fu Yong Town, Shenzhen 518013, Bao An District, China. The listing carries a harbour trust tier and an imported supplier tier, with a response rate of 0.00 percent and zero average response hours recorded. No verified on-site audit, trade assurance value or transaction history is shown in the source material.
The supplier profile does not state year of establishment, factory floor area, number of employees, annual revenue, named clients or specific certifications held. Buyers should therefore request copies of ISO 9001, ISO 14001 or CE/LVD/EMC certificates directly, and ask for a factory visit or third-party audit report before committing to volume orders. The source description mentions compliance with international standards, but the exact standards and certificate numbers are absent and must be confirmed with the supplier.
| 企业类型 | Supplier |
| 成立年份 | Contact Supplier |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| 响应时间 | <4h |
| 响应率 | Contact Supplier |
Before placing an order with Shenzhen Topvision Optoelectronic Technology Co., Ltd, verify that the quoted specification sheet matches the actual module you will receive. Request a sample cabinet for evaluation, measure the real pixel pitch with calipers, and run_gap check. Ask for LED brand certificates, RoHS compliance documents and a factory ISO audit report. Because the response rate is shown as zero percent, initiate contact through multiple channels (email, phone and any available messaging platform) and document all commitments in writing before transferring any deposit.
Logistics from Shenzhen typically ship through Yantian or Shekou port under FOB, CIF or DDP terms depending on your preference. The source mentions FOB and CIF as available, but exact lead time is not stated. Standard production for indoor LED cabinets runs four to six weeks after artwork approval, plus two to four weeks ocean freight to Europe or North America. Confirm whether the price includes plywood flight cases or only carton packaging. Payment terms quoted include L/C and T/T; for first orders, a 30 percent deposit with 70 percent against copy of B/L is a common safeguard, though this must be negotiated case by case.
Quality assurance for LED displays demands pre-shipment inspection at the factory. Plan for an independent third-party inspector or a video-call factory audit to check colour uniformity, dead-pixel count and cabinet finish. Ask the supplier to power the batch for a 72-hour burn-in test before packing. Documentation required for customs clearance usually includes commercial invoice, packing list, certificate of origin and, for some destinations, a CCC export certificate or CE compliance declaration. Ensure the supplier provides these in the correct format for your import country before the cargo departs Shenzhen port.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
确保6mm Pitch Full Color Indoor Led Display供应链的稳定对业务运转至关重要。Shenzhen Topvision Optoelectronic Technology Co., Ltd是位于China的认证供应商,提供可用于国际出口的高品质6mm Pitch Full Color Indo。直接对接供应商后,买家可绕过中间环节,协商定制化批发价格并安排大宗出货。该产品是Products行业的重要品类,服务全球的分销商、批发商和进口商。
当您能直接对接合适的生产商和出口商,全球采购的复杂度将大幅降低。从China进口6mm Pitch Full Color Indo时,买家可直接与Shenzhen Topvision Optoelectronic Technology Co., Ltd沟通物流方案、包装要求和偏好付款方式。这一无缝沟通由 EximNext 提供支持 — 一个汇聚全球主要行业认证卖家的顶级全球 B2B 贸易平台。
我们深知供应商资质核实是进口商的首要关切。Shenzhen Topvision Optoelectronic Technology Co., Ltd已纳入我们广泛的国际认证出口商网络。浏览Products类目下的更多产品,或发掘Products行业的新供应商。借助我们可信赖的进出口交易平台 — 为严肃国际贸易而生的进出口交易平台,全面拓展您的采购能力。
从China进口6mm Pitch Full Color Indo时,买家应考虑运输条款(FOB、CIF、EXW)、清关文件要求以及付款安全。请联系供应商,商议最适合目的国的物流方案。
点击"索取报价"按钮直接联系Shenzhen Topvision Optoelectronic Technology Co., Ltd。供应商将根据您的批量需求和运输目的地提供定制报价。
可以,Shenzhen Topvision Optoelectronic Technology Co., Ltd从China供应6mm Pitch Full Color Indo用于批量出口。您可直接与供应商协商最小起订量、包装细节和运输条款。
FOB、CIF、EXW 等运输条款均可直接与Shenzhen Topvision Optoelectronic Technology Co., Ltd协商。请联系供应商,商议最适合将6mm Pitch Full Color Indo进口至您所在国家的物流方案。
在下达大宗批发订单前,可通过平台直接向Shenzhen Topvision Optoelectronic Technology Co., Ltd发送消息索取产品样品。
Shenzhen Topvision Optoelectronic Technology Co., Ltd是 EximNext 平台注册并认证的供应商。建议使用平台的安全消息系统以及标准国际支付方式(L/C、T/T、担保交易)完成交易。
请向Shenzhen Topvision Optoelectronic Technology Co., Ltd索取详细的产品资料,包括等级、纯度、尺寸、材质成分以及适用的行业标准。
EximNext 上的众多供应商(包括Shenzhen Topvision Optoelectronic Technology Co., Ltd)均为大宗批发订单提供定制包装和贴牌(OEM/ODM)选项。
常用付款方式包括信用证(L/C)、电汇(T/T)、付款交单(D/P)以及担保交易服务。
是的,EximNext 汇聚了来自 200 多个国家和地区的Products类生产商、出口商和批发商。
点击本页的"索取报价"或"联系供应商",提供所需数量、目的国和偏好的运输条款。所有沟通均通过我们的全球 B2B 贸易平台安全完成。
发掘 Products 类目下来自全球认证供应商的更多产品。