About Zibo Taa Metal Technology Co., Ltd - Metal and Abrasive Supplier in China

China‑based Zibo Taa Metal Technology Co., Ltd lists five active products in its catalogue. The company’s portfolio includes steel shot, steel grit, low carbon steel shot, stainless steel cut‑wire shot and garnet grit abrasive. Each item is linked to a specific HS code: steel shot (7205.10), steel grit (7326.90), low carbon steel shot (7326.90), stainless steel cut‑wire shot (7204.49) and garnet grit abrasive (2513.20). Materials are described as high carbon steel with 0.65‑1.20 % carbon, tempered high carbon steel, low carbon steel with 0.05‑0.25 % carbon, stainless steel grades 304/316 and natural almandine garnet (Al₂Si₃O₁₂). The catalogue groups the items under broader categories such as steel blocks, steel balls, stainless steel scrap and abrasives.

The five products fall within two HS‑code families for ferrous metal products (7205, 7204, 7326) and one family for mineral abrasives (2513). Steel shot and grit are standard media for shot‑blasting and surface preparation, while the stainless‑steel cut‑wire shot supplies corrosion‑resistant blasting applications. Garnet grit is a natural mineral abrasive commonly used in sandblasting and water‑jet cutting. The active product count of five indicates a focused offering within the metal and abrasive segments.

Product Range and Specialties of Zibo Taa Metal Technology Co., Ltd

The catalogue specifies five concrete products: steel shot (high carbon steel, 0.65‑1.20 % C), steel grit (tempered high carbon steel), low carbon steel shot (C 0.05‑0.25 %), stainless steel cut‑wire shot (grades 304/316) and garnet grit abrasive (natural almandine). In the steel‑shot market, typical grain sizes range from 0.2 mm to 4 mm and hardness values are often 55‑65 HRC. Steel grit is usually supplied in angular particles of 0.5‑3 mm with a Rockwell hardness of 60‑70 HRC. Low‑carbon steel shot is selected for applications requiring lower impact energy, often graded by weight per cubic metre (≈7.8 t/m³). Stainless‑steel cut‑wire shot is graded by stainless grade and particle size, frequently 0.3‑2 mm for aerospace and food‑processing surface cleaning. Garnet grit is typically sized 0.2‑1.2 mm, with a Mohs hardness of 7‑7.5 and a bulk density around 3.9 t/m³. These specifications reflect common industry grades that buyers compare when evaluating suppliers.

Trade and Export Information - Zibo Taa Metal Technology Co., Ltd

China is a leading exporter of steel shot, grit and mineral abrasives, supplying automotive, construction and heavy‑industry sectors worldwide. HS‑code 7205.10 covers carbon steel shot used for surface preparation, while 7326.90 includes various steel grit and low‑carbon shot forms; both are subject to customs inspections for chemical composition and hardness compliance. HS‑code 7204.49 for stainless‑steel cut‑wire shot often requires documentation of stainless grade (304/316) and corrosion‑resistance tests. Mineral abrasives under HS‑code 2513.20, such as garnet, are typically accompanied by mineralogical analysis and bulk density certificates. Major import regions for these products include Southeast Asia, the Middle East, Europe and North America, where buyers commonly request ISO 9001 quality‑management certification and, where applicable, ISO 14001 environmental compliance. Standard packaging includes 20‑ft or 40‑ft containers with steel drums or bulk bags, and Incoterms such as FOB or CIF are regularly used.

Sourcing from Zibo Taa Metal Technology Co., Ltd - Buyer Guidance

When sourcing steel shot or grit from this supplier, request a mill test report that details carbon content, tensile strength and Rockwell hardness for each grade. For the stainless‑steel cut‑wire shot, ask for a certificate of stainless grade (304 or 316) together with a corrosion‑resistance test report. Garnet grit buyers should obtain a mineral analysis report, bulk density data and a particle‑size distribution chart. Verify that the supplier can provide Material Safety Data Sheets (MSDS) and, if required by the destination market, an ISO 9001 compliance certificate. Sampling is typically done in 1 kg or 5 kg quantities, and buyers often confirm packaging integrity (e.g., 20‑ft container with sealed steel drums) before finalizing the order.

What HS codes are used for the steel shot and steel grit offered by Zibo Taa Metal Technology?

Steel shot is classified under HS code 7205.10, while steel grit and low carbon steel shot fall under HS code 7326.90.

Which stainless grades are available for the cut‑wire shot?

The cut‑wire shot is supplied in stainless grades 304 and 316, as indicated in the catalogue.

What material is the garnet grit abrasive made from?

The garnet grit is natural almandine garnet with the chemical formula Al₂Si₃O₁₂.

What typical particle sizes should a buyer expect for the steel shot products?

Industry practice places steel shot particle sizes between 0.2 mm and 4 mm, depending on the specific grade.

Which certifications are commonly required for steel shot and abrasive imports?

Buyers usually request ISO 9001 quality‑management certification and, for stainless products, documentation of the stainless grade; environmental certification such as ISO 14001 may also be required.

What documentation should be requested before placing an order?

Request a mill test report, material safety data sheet, chemical composition analysis and, where applicable, a certificate of stainless grade or mineral analysis for garnet.