Zhuhai Feiyang Novel Materials Co., Ltd.

China‑based Zhuhai Feiyang Novel Materials Co., Ltd. lists nine active products across the Industrial Chemicals, Chemicals & Allied Products and Resin categories. The catalogue includes Pgda (CAS 623‑84‑7), Tmpde (Trimethylolpropane Diallyl Ether), a pentaerythritol triallyl ether derivative, Ibib (isobutyl isobutyrate), a solvent formulation labelled EGDA to replace DBE/PMA, Acetoacetoxyethyl Methacrylate (HS 2916.14), methyl 3‑methoxypropionate, Ethylene Glycol Tertiary Butyl Ether (HS 2909.44) and Ethylene Glycol Diacetate. Each entry follows the chemical naming conventions used in global trade and the two items with HS codes fall under Chapter 29 of the Harmonized System, which covers organic chemicals.

The product set reflects typical intermediates used in polymer production, coatings, and solvent blends. Acetoacetoxyethyl Methacrylate is described as a methacrylic monomer with a keto‑functional group (C10H14O4) and is classified under HS 2916.14, while Ethylene Glycol Tertiary Butyl Ether (C6H14O2, CAS 7580‑85‑0) carries HS 2909.44. The remaining items are identified by common trade names without HS codes, indicating they are generally grouped within broader HS headings for glycol ethers, esters, and allyl‑functional resins. The list provides a snapshot of the chemical intermediates that Chinese exporters commonly list for downstream manufacturers.

The catalogue centres on speciality monomers, glycol ethers and ester solvents that serve as building blocks for coatings, adhesives and polymeric resins. Acetoacetoxyethyl Methacrylate is typically supplied at 98‑99 % purity, with a viscosity of 10‑15 cP at 25 °C and a water content below 0.1 %. Ethylene Glycol Tertiary Butyl Ether is usually offered with a flash point above 30 °C, a moisture content under 0.05 % and conforms to ASTM D86 distillation range specifications. Pgda and the pentaerythritol triallyl ether derivative are allyl‑functional glycol esters that are often graded by epoxy equivalent weight (EEW) and by residual allyl content, parameters important for resin synthesis. Ibib and the methyl 3‑methoxypropionate solvent are standard ester solvents graded by boiling point range (120‑130 °C for Ibib) and by total acid number (typically <0.1 mg KOH/g).