About Zhongmei (hebei) Special Rubber Product - Agriculture Supplier in China

China‑based Zhongmei (hebei) Special Rubber Product lists five distinct hydraulic hose models in its catalogue. The items are identified as Hydraulic hose 1SN, 2ST, 2SC, R17 and 2SN, all classified under the broader agriculture category, where such hoses are commonly fitted to irrigation equipment, sprayers and harvesting machinery. The supplier’s catalogue does not provide HS codes, so the products fall under the general HS chapter 39 for rubber‑reinforced hoses or chapter 73 for steel‑braided variants, depending on material composition. Each model is presented without additional technical data, leaving the buyer to request specifications such as pressure rating, internal diameter and reinforcement type.

The five hose models cover a range of pressure classes typically from 150 bar to 350 bar and nominal diameters between 6 mm and 40 mm, which aligns with standard agricultural hydraulic systems. Industry practice groups similar hoses under ISO 4423 (hydraulic fluid power hoses) and DIN 2353 (reinforced rubber hoses) for quality and safety verification. Because the catalogue lists only product names, buyers should confirm the exact material - natural rubber, synthetic rubber or a composite - and the type of braid (steel or textile) before placing an order.

Product Range and Specialties of Zhongmei (hebei) Special Rubber Product

Zhongmei’s catalogue focuses exclusively on hydraulic hoses, a core component for transmitting pressurised fluid in farm machinery and related equipment. The 1SN, 2ST, 2SC, R17 and 2SN designations typically indicate variations in pressure class, coupling type and reinforcement pattern; for example, “2” series hoses often meet a higher pressure class than “1” series, while “R” may denote a specific coupling thread. In the global market, hydraulic hoses are offered in grades such as ISO 4423‑A (up to 210 bar) and ISO 4423‑B (up to 350 bar), with common materials including nitrile rubber (NBR), fluorocarbon (FKM) and EPDM for chemical resistance. Buyers also look for standard fittings - JIC, NPT or ISO 8434 - and specifications like burst pressure (typically 1.5‑2 times the working pressure) and temperature range (‑40 °C to +120 °C).

Trade and Export Information - Zhongmei (hebei) Special Rubber Product

China is a major exporter of hydraulic hoses, with shipments frequently directed to agricultural regions in Southeast Asia, the European Union and North America. Export logistics normally use 20‑foot or 40‑foot containers, each capable of holding 1,200‑1,500 kg of coiled hoses, and the goods are often packed in waterproof wooden crates or cardboard reels to prevent contamination. Buyers generally require compliance with ISO 9001 quality‑management systems and may request CE marking or UL certification depending on the destination market. The HS‑code families most often applied to these products are 3917 (plastic‑reinforced hoses) and 7307 (steel‑braided hoses), which are subject to customs inspections for correct declaration of material composition and pressure class. Typical Incoterms used by Chinese hose exporters include FOB Shanghai or CIF destination port, allowing the importer to arrange further inland transport.

Sourcing from Zhongmei (hebei) Special Rubber Product - Buyer Guidance

When sourcing hydraulic hoses from Zhongmei, buyers should ask for a detailed data sheet that lists working pressure, burst pressure, internal diameter, length, coupling type and material composition. Request test reports such as ISO 4423 pressure‑cycle testing and material‑compatibility certificates, especially if the hoses will be used with agro‑chemicals or high‑temperature fluids. Verify whether the supplier holds ISO 9001 or other relevant quality certifications, and confirm packaging dimensions and container loading plans to ensure efficient freight handling.

What types of hydraulic hoses does Zhongmei list in its catalogue?

The catalogue includes five models - Hydraulic hose 1SN, 2ST, 2SC, R17 and 2SN - all intended for agricultural machinery and similar hydraulic systems.

Are pressure ratings provided for these hoses?

Specific pressure ratings are not listed in the catalogue; buyers should request the working pressure (commonly 150 bar to 350 bar) and burst pressure from the supplier.

Which material standards are typical for Chinese hydraulic hoses?

Chinese manufacturers usually adhere to ISO 4423 for hydraulic hoses and may use rubber compounds such as NBR, EPDM or FKM, with steel or textile reinforcement according to the hose class.

What HS code should I expect for these hoses when importing?

Hydraulic hoses are generally classified under HS chapter 39 (e.g., 3917 for rubber‑reinforced hoses) or chapter 73 for steel‑braided versions, depending on material.

What certifications are commonly required for agricultural hydraulic hoses?

Importers often request ISO 9001 quality‑management certification, CE marking for European markets, and test reports confirming pressure‑cycle performance.

How are the hoses typically packaged for export?

Export shipments are usually coiled and packed in waterproof wooden crates or reinforced cardboard reels, suitable for placement in standard 20‑ft or 40‑ft containers.

What Incoterms are typically used by Chinese hose exporters?

FOB Shanghai and CIF to the buyer’s destination port are the most common Incoterms used for hydraulic hose shipments from China.

What documentation should I obtain before confirming an order?

Request a product data sheet, material safety data sheet (if chemicals are involved), ISO 4423 test report, and proof of any quality certifications such as ISO 9001.