About Yst Tianjin Import And Export Co., Ltd. - Fluorspar Supplier in China

China, specifically Tianjin, lists eight active products under the fluorite (fluorspar) family. The catalogue includes fluorspar lump, sand, and several powder grades ranging from 70 % to 95 % calcium fluoride (CaF₂) purity. Products are classified under HS code 2529.21 for lump, sand and most powder forms, and HS code 2529.22 for higher‑purity grades such as the 90 % minimum metallurgical grade. The supplier’s trust tier is recorded as “harbor”, indicating a mid‑level verification level on major trade platforms. All items are described as metallurgical grade, suitable for industrial chemical processes. The eight listed items cover both coarse and fine material forms. Fluorspar lump and sand are presented without additional HS‑code variation, while powder grades are split between 75 % (HS 2529.21) and 80 % - 90 % (HS 2529.22). One entry lacks an HS code in the source data, but the product name “Metallurgical grade fluorite Caf2 85% min” aligns with the 2529.22 family used for higher‑purity grades. The catalogue therefore provides a spectrum of CaF₂ concentrations that match typical metallurgical specifications. Buyers can select the appropriate grade based on required fluoride content for downstream processes.

Product Range and Specialties of Yst Tianjin Import And Export Co., Ltd.

The supplier’s catalogue focuses exclusively on calcium fluoride products used in metallurgical applications. Fluorspar lump and sand are typically supplied in bulk bags or 20‑ft containers, with particle sizes ranging from 2 mm to 10 mm for coarse material. Powder grades are usually graded by purity (70 %‑95 %) and moisture content below 1 %, and are shipped in sealed bags to prevent moisture ingress. In the global market, metallurgical fluorspar is commonly classified by purity: 70 %‑80 % for standard steel‑making fluxes, 85 %‑90 % for aluminum‑smelting, and 95 %+ for hydrofluoric‑acid production. Buyers often request a certificate of analysis confirming CaF₂ content, moisture, and particle‑size distribution. Industry standards such as ISO 9001 for quality management and SGS or Bureau Veritas inspection reports are frequently required for bulk shipments. Typical specifications also reference the International Fluorine Association (IFA) grade definitions, where “metallurgical grade” denotes a minimum of 70 % CaF₂ and impurity limits on iron, silica, and aluminum oxides. These benchmarks help buyers compare offers from different exporters.

Trade and Export Information - Yst Tianjin Import And Export Co., Ltd.

China is among the world’s largest exporters of fluorspar, with shipments mainly destined for aluminum smelters in the Middle East, steel producers in Europe, and hydrofluoric‑acid manufacturers in North America. The HS‑code families 2529.21 (natural fluorspar, lump, sand, and lower‑purity powder) and 2529.22 (higher‑purity metallurgical grade) are routinely inspected by customs under the Harmonised System Chapter 25, which covers mineral products. Importing countries often require pre‑shipment laboratory analysis, an SGS inspection certificate, and a Bill of Lading indicating the correct HS code. Typical logistics involve loading bulk bags onto 20‑ft or 40‑ft containers, with freight terms such as FOB Tianjin or CIF destination port. Chinese exporters commonly obtain export licenses from the Ministry of Commerce and may need to comply with REACH or RoHS regulations when the product is destined for downstream chemical processing. Buyers should verify that the shipment is accompanied by a Material Safety Data Sheet (MSDS) outlining fluoride hazards.

Sourcing from Yst Tianjin Import And Export Co., Ltd. - Buyer Guidance

When sourcing fluorspar from this supplier, request a recent Certificate of Analysis that details CaF₂ purity, moisture level, particle‑size range, and any listed impurities (Fe, Si, Al₂O₃). Confirm the HS code on the commercial invoice matches the product grade (2529.21 for 70 %‑80 % grades, 2529.22 for 85 %‑95 % grades). Ask for an independent inspection report (e.g., SGS) and, if required by the destination country, a REACH compliance statement. Typical minimum order quantities for bulk fluorspar range from 10 metric tonnes for powder to 20 metric tonnes for lump, with lead times of 30‑45 days after receipt of a pro‑forma invoice. Verify packaging integrity - sealed polyethylene bags inside a sturdy wooden crate or bulk container - to protect against moisture. Clarify Incoterms (FOB Tianjin or CIF) and ensure the supplier can provide a full set of export documents, including a phytosanitary certificate if required by the importing jurisdiction.

What are the HS codes for the fluorspar products listed by Yst Tianjin?

Lump, sand and lower‑purity powders are classified under HS code 2529.21, while higher‑purity metallurgical grades (90 % CaF₂ and above) use HS code 2529.22.

Which purity levels are available in the catalogue?

The catalogue includes CaF₂ purities of 70 % (lump), 75 %, 80 %, 85 % and 90 % (powders), as well as sand and lump grades with 95 %‑98 % calcium fluoride content.

What documentation should a buyer request before placing an order?

A Certificate of Analysis, an independent inspection report (e.g., SGS), a Material Safety Data Sheet, and the commercial invoice showing the correct HS code.

What are the common packaging methods for bulk fluorspar shipments?

Bulk shipments are typically packed in sealed polyethylene bags (often 20 kg or 25 kg) placed inside wooden crates or directly loaded into 20‑ft/40‑ft containers for ocean freight.

Which international standards are usually applied to metallurgical fluorspar?

Buyers often look for ISO 9001 quality‑management certification, SGS inspection reports, and compliance with IFA grade definitions for metallurgical fluorspar.

What are typical lead times and minimum order quantities for these products?

Lead times are generally 30‑45 days after order confirmation, with minimum order quantities ranging from 10 metric tonnes for powder grades to 20 metric tonnes for lump or sand.

Which markets commonly import Chinese fluorspar?

Major importers include aluminum smelters in the Gulf region, steel manufacturers in Europe, and hydrofluoric‑acid producers in North America.

What Incoterms are most frequently used for these exports?

Exporters from Tianjin often quote FOB Tianjin or CIF to the buyer’s destination port, depending on the buyer’s logistical preferences.