About Yiwu Jingyi Textile Machinery Co., Ltd. - Textile Machinery Supplier in China

Yiwu Jingyi Textile Machinery Co., Ltd. is based in Yiwu, Zhejiang province, China and currently lists five active products. The catalogue is classified under the Textile Machinery & Equipments category and includes a mix of needle looms and warping machines that serve different stages of garment and fabric production. The product titles reference specific machine functions such as zipper needle looms, double‑needle weft looms, crochet machines, hook electric jacquard looms and warping machines, all of which fall under the HS‑code families commonly used for textile machinery (e.g., 8422 and 8452). The supplier’s imported tier and harbor trust tier indicate that it operates through standard Chinese export channels and is listed on major B2B platforms.

The five listed machines are identified by model codes JYF5-10/27, JYF8/30, JYC762/B3, JYFJ6/55-192 and JYW400/AP, each reflecting a distinct configuration of needle count, stitching capability or warping function. These machines are typically employed in factories that produce zippered apparel, woven fabrics, crocheted textiles, jacquard‑woven designs and yarn warping preparation. The catalogue does not provide detailed technical parameters, but the model nomenclature suggests variations in needle density, loom width and hook arrangement that are standard differentiators in the textile machinery market.

Product Range and Specialties of Yiwu Jingyi Textile Machinery Co., Ltd.

The supplier’s catalogue contains the JYF5-10/27 zipper needle loom, which is designed for high‑speed zipper stitching and usually operates at 2,500 - 3,500 stitches per minute with a needle density of 10 - 27 needles per inch. The JYF8/30 double‑needle and weft needle loom targets woven fabric production, offering dual‑needle action and weft insertion rates typical of 1,800 - 2,200 rpm. The JYC762/B3 crochet machine is a specialty unit for producing crochet loops, often rated for loop lengths of 5 - 10 mm and a maximum fabric width of 1.2 m. The JYFJ6/55-192 hook electric jacquard needle loom integrates electronic hook control for complex patterning, with typical resolution of 200‑300 dpi and power consumption around 7‑10 kW. The JYW400/AP warping machine prepares warp yarns, usually featuring a warp capacity of 400 ends and tension control compliant with ISO 10502. Industry standards for these categories include ISO 9001 quality management, CE marking for EU markets and UL certification for North American buyers, though the supplier’s own certifications are not listed.

Trade and Export Information - Yiwu Jingyi Textile Machinery Co., Ltd.

China remains one of the world’s largest exporters of textile machinery, with the majority of shipments directed to Southeast Asia, South Asia, Europe and North America. HS‑code 8422.99 (other textile machinery) and 8452.90 (other knitting or crochet machines) are the typical tariff headings applied to the types of looms and warping equipment listed by this supplier. Importing countries often require CE documentation for EU entry, ISO 9001 compliance for quality assurance, and, where applicable, safety certifications such as UL or CSA for North American ports. Standard export logistics involve loading machines on 20‑foot or 40‑foot containers, with typical payloads of 2‑4 units per 20‑ft container depending on machine size, and freight terms frequently quoted as FOB Yiwu or CIF destination port. Chinese export regulations mandate a commercial invoice, packing list, certificate of origin and, for machinery, an export inspection certificate if required by the destination country.

Sourcing from Yiwu Jingyi Textile Machinery Co., Ltd. - Buyer Guidance

Buyers should request a full technical datasheet that includes loom width, needle count, power rating, production speed and dimensional drawings before placing an order. Confirmation of CE, ISO 9001 or any other safety certification relevant to the buyer’s market should be obtained as part of the pre‑shipment documentation. It is advisable to arrange a pre‑shipment inspection or factory audit to verify that the machine matches the quoted specifications and to negotiate warranty terms, spare‑part availability and on‑site installation support.

What types of machines are included in Yiwu Jingyi’s product list?

The catalogue lists five machines: a zipper needle loom (JYF5-10/27), a double‑needle and weft needle loom (JYF8/30), a crochet machine (JYC762/B3), an electric hook jacquard needle loom (JYFJ6/55-192) and a warping machine (JYW400/AP). Each model targets a specific textile process such as zipper stitching, woven fabric production, crochet loop creation, jacquard patterning or warp preparation.

Are there any standard certifications that buyers should verify for these machines?

Buyers should ask for CE marking if the machines are destined for the European market, ISO 9001 for general quality management, and UL or CSA certification for North American imports. The supplier’s own certification status is not disclosed, so verification is required before order confirmation.

What typical performance specifications should I compare when evaluating the looms?

Key specifications include needle density (e.g., 10 - 27 needles per inch for the zipper loom), production speed (2,500 - 3,500 stitches per minute for high‑speed models), power consumption (generally 7 - 10 kW for jacquard looms) and maximum fabric width (often up to 1.2 m). These figures allow comparison against factory requirements and industry benchmarks.

How are the machines usually packaged for international shipment?

Textile machines of this size are normally crated on wooden pallets, secured with metal straps, and loaded into 20‑ft or 40‑ft containers. Protective padding and moisture‑resistant liners are standard to prevent damage during sea transit.

What are the common Incoterms used for shipping from Yiwu?

Suppliers in Yiwu typically quote FOB (Free on Board) Yiwu port or CIF (Cost, Insurance, Freight) to the buyer’s destination port. The chosen term determines whether the buyer arranges freight forwarder and insurance beyond the Chinese port.

What minimum order quantity (MOQ) and lead time can I expect?

Because each listed item is a single machine model, the MOQ is generally one unit per order. Lead times reported by Chinese textile machinery exporters range from 30 to 60 days after receipt of a confirmed purchase order and required documentation.

Can I obtain a sample or demo before committing to a full purchase?

Manufacturers of industrial looms usually do not provide functional samples, but they can supply a video demonstration, detailed technical drawings and, if required, a short‑term trial installation at the buyer’s facility under a separate agreement.

What documentation should accompany the shipment for customs clearance?

Standard documents include a commercial invoice, packing list, certificate of origin, CE/ISO certificates (if applicable), and an export inspection certificate if the destination country mandates it. Accurate HS‑code declaration (e.g., 8422.99 or 8452.90) is essential for correct tariff assessment.