About Wuxi Pacific New Materials Co., Ltd. - Laminates Supplier in China

China‑based Wuxi Pacific New Materials Co., Ltd. lists 28 active products that fall under categories such as Laminates, Packaging Items & Containers, and various types of plastic bags. The catalogue references high barrier films, symmetric and asymmetric nylon films, EVOH‑based barrier films, air‑bubble films, embossed films, and a range of food‑grade vacuum and zippered bags, all of which are classified under the HS‑code families for plastic films (typically 3920) and plastic bags (typically 3915).

The supplier’s product titles include “High Barrier Film”, “Symmetric Nylon Film”, “Asymmetric Nylon Film”, “EVOH high barrier film”, “Food Packing Film”, “Air Bubble Film”, “Embossed Film”, “Water Bag Film”, “Zipper Bag”, and several vacuum‑type food bags. These 28 SKUs cover both mono‑layer and multi‑layer co‑extruded structures, offering options from low‑cost food films to higher‑performance barrier solutions for extended shelf life.

Product Range and Specialties of Wuxi Pacific New Materials Co., Ltd.

The listed catalogue focuses on polymer‑based films and bags, primarily using polyolefin (PE, PP), nylon (PA), and EVOH resins. Industry practice for such films includes thicknesses from 10 µm to 30 µm for barrier films, tensile strengths of 70‑100 MPa for nylon layers, and melt‑flow indices of 5‑15 g/10 min for PE/PP bags. Typical grades meet food‑contact standards such as FDA 21 CFR 175.300 for polymers and EU Regulation 1935/2004, with EVOH layers often targeting oxygen transmission rates below 10 cc/m²·day.

Trade and Export Information - Wuxi Pacific New Materials Co., Ltd.

China is one of the world’s largest exporters of plastic films and flexible packaging, supplying Europe, North America, the Middle East and Southeast Asia. HS code 3920 covers most of the films listed, while HS code 3915 applies to the poly‑bag products; customs inspections frequently require SGS or BVQI test reports and certificates of compliance with food‑contact regulations. Export shipments are commonly packed in 20‑ft containers (≈1,200 kg of rolled film) or 40‑ft containers (≈2,400 kg), using FOB or CIF incoterms. Buyers typically request pre‑shipment inspection and may need to verify that the exporter holds ISO 9001 quality‑management certification, although this specific supplier’s certification status is not listed.

Sourcing from Wuxi Pacific New Materials Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request a detailed product data sheet that specifies film thickness, tensile strength, oxygen transmission rate, and melt‑flow index. Ask for food‑contact compliance certificates (FDA, EU) and an independent laboratory test report (e.g., SGS) for the specific barrier performance required. Verify the minimum order quantity - commonly 10,000 pieces for bags or 500 kg of film - and confirm lead times of 30‑45 days, with packaging in polyethylene‑wrapped rolls or bulk cartons suitable for container loading.

What types of barrier films does the supplier offer?

The catalogue lists high barrier films based on EVOH and multi‑layer co‑extrusion, as well as symmetric and asymmetric nylon films. These are typical for food‑packaging applications requiring low oxygen transmission.

Are the food bags compliant with international food‑contact regulations?

The supplier does not list specific certifications, so buyers should request FDA food‑contact compliance certificates and EU Regulation 1935/2004 declarations before placing orders.

What HS codes apply to the listed products?

Plastic films fall under HS code 3920, while flexible polyethylene or polypropylene bags are classified under HS code 3915. These codes are used by customs for tariff and inspection purposes.

What documentation should be requested before purchase?

Request a product data sheet, melt‑flow index, tensile strength data, and an independent test report for barrier performance. Additionally, ask for any available ISO 9001, FDA, or EU food‑contact certificates.

What are typical minimum order quantities and lead times?

For film rolls, buyers often face MOQs of 500 kg per grade; for bags, MOQs start around 10,000 pieces. Lead times reported by similar Chinese exporters range from 30 to 45 days after order confirmation.

How are the products packaged for international shipment?

Films are usually wound onto cores and wrapped in polyethylene, then stacked in 20‑ft or 40‑ft containers. Bags are packed in bulk cartons or shrink‑wrapped bundles, with labeling that includes HS code, net weight, and material composition.

Which markets typically import these Chinese plastic films and bags?

Major importers include the European Union, the United States, Japan, South Korea, and the Gulf Cooperation Council countries, where the products are used in food packaging, medical supplies, and consumer goods.

Are there any standard quality tests buyers should verify?

Typical tests include oxygen transmission rate (OTR) for barrier films, tensile strength and elongation at break for nylon layers, and melt‑flow index for polyethylene/ polypropylene bags. SGS or equivalent lab reports are standard evidence of compliance.