About Way Medical Supplies Pty Ltd - Medical Disposable Supplies Supplier in Australia

Way Medical Supplies Pty Ltd operates from Australia and currently lists 13 active products in its catalogue. The product set focuses on disposable medical garments and hygiene solutions, covering isolation gowns, surgical gowns, chemotherapy gowns, surgical caps, and various hand sanitizer formats. Gown items are recorded under HS code 6210.10, which pertains to non‑woven medical garments, while caps appear under HS codes 6307.90 for non‑sterile caps and 6505.00 for sterile caps. Hand sanitizer entries are not assigned an HS code in the supplied data but are commonly classified under HS 3808.91 for disinfectants.

The isolation gowns are offered in AAMI Level 2 with a 40 gsm SMS polypropylene fabric and Level 3 with a 60 gsm SMS polypropylene fabric. Surgical gowns are supplied in AAMI Levels 2, 3 and 4, using SMS non‑woven constructions of 35 gsm, 43 gsm, and a polyethylene‑coated 43 gsm base respectively. Chemotherapy gowns include an ultrasonic sleeve version and a taped version, both built from polypropylene non‑woven with a 0.025 µm polyethylene laminate for fluid barrier performance. Surgical caps are listed at 35 gsm SMS non‑woven polypropylene, with a sterile variant coded under HS 6505.00. Hand sanitizer is provided in 295 ml bottles, 500 ml bottles, 25 L drums containing 75 % alcohol, and bulk 1 tonne pallets.

Product Range and Specialties of Way Medical Supplies Pty Ltd

The catalogue features isolation and surgical gowns classified by AAMI protection levels, a common benchmark in Australian and international healthcare settings. SMS (spunbond‑meltblown‑spunbond) non‑woven polypropylene is the standard material for these garments, with gram weights ranging from 35 gsm to 60 gsm to achieve the required barrier performance. Chemotherapy gowns add a polyethylene laminate of 0.025 µm to enhance liquid resistance, a specification frequently required for oncology departments. Caps are supplied in a 35 gsm SMS non‑woven format, with a sterile version meeting the requirements of ISO 14644 cleanroom standards. Hand sanitizer products are formulated with 75 % ethanol, aligning with WHO and Australian guidelines for hand hygiene.

In the broader market, AAMI Level 2 gowns correspond to fluid resistance of 0.1 ml water penetration, Level 3 to 0.5 ml, and Level 4 to 1 ml, while EN 13795 provides comparable European test methods. Buyers often look for certifications such as ISO 13485 quality management, CE marking for the European Economic Area, and FDA registration for U.S. distribution. Hand sanitizer is typically required to meet the Australian Therapeutic Goods Administration (TGA) standards and may carry an SDS indicating flammability and storage conditions. Packaging for gowns and caps usually involves sealed poly‑bagged cartons of 50‑100 pieces, whereas sanitizer is commonly packed in drums or bulk pallets ready for container loading.

Trade and Export Information - Way Medical Supplies Pty Ltd

Australian manufacturers of disposable medical garments and sanitizing liquids frequently export to the Asia‑Pacific region, the Middle East, Europe and North America, leveraging the country's robust regulatory framework. The HS code 6210.10 for non‑woven medical garments and 6307.90/6505.00 for caps are routinely inspected by customs for compliance with textile and medical device regulations, and hand sanitizer falls under HS 3808.91, which may require a pre‑export certificate of analysis. Commonly required certifications include ISO 13485, CE marking (MDD) for European markets, and FDA registration for the United States, while buyers often request an SDS for sanitizer and AAMI test reports for gowns.

Logistics for these products typically involve containerised shipping, with 20‑ft containers holding up to 1,200 gowns or caps and 40‑ft containers accommodating bulk sanitizer drums or pallets. Incoterms such as FOB (Free on Board) or CIF (Cost, Insurance and Freight) are standard in B2B transactions for medical consumables. Australian export controls mandate that sanitizer containing ≥70 % alcohol be accompanied by a declaration of compliance with the TGA, and medical garments may require a Certificate of Conformity to demonstrate adherence to AAMI or EN standards.

Sourcing from Way Medical Supplies Pty Ltd - Buyer Guidance

Prospective buyers should request material test reports confirming GSM, tensile strength and liquid barrier performance for gowns and caps, as well as AAMI level certification documents. For hand sanitizer, a Safety Data Sheet (SDS), Certificate of Analysis (CoA) indicating 75 % alcohol content, and any relevant TGA registration numbers should be obtained before placing an order.

Verification of ISO 13485 or CE certification can provide assurance of the supplier’s quality management system. Buyers are advised to confirm packaging details, such as poly‑bag sealing and carton labeling, and to agree on MOQ and lead times - standard orders of gowns and caps often start at 200‑500 pieces with a 2‑4 week production window, while bulk sanitizer pallets may require a higher MOQ and a 3‑5 week lead time.

What types of medical gowns does Way Medical Supplies offer?

The supplier lists isolation gowns at AAMI Level 2 and Level 3, and surgical gowns at AAMI Levels 2, 3 and 4. All gowns are made from SMS non‑woven polypropylene with GSM ranging from 35 to 60, and the Level 4 version includes a polyethylene coating for added fluid resistance.

Are the gowns compliant with any standard?

The product descriptions reference AAMI Level classifications, which are widely recognized. Buyers should request the supplier’s AAMI test certificates or ISO 13485 documentation to confirm compliance.

What hand sanitizer concentrations are available?

Hand sanitizer is formulated with 75 % alcohol and is offered in 295 ml bottles, 500 ml bottles, 25 L drums, and 1 tonne pallets, matching WHO‑recommended strength for effective hand hygiene.

Which HS codes are used for the gowns and caps?

Gowns are classified under HS code 6210.10 (non‑woven medical garments). Non‑sterile surgical caps use HS 6307.90, while sterile caps are recorded under HS 6505.00.

What certifications should a buyer request for these products?

Typical buyer requirements include ISO 13485 quality‑management certification, CE marking for European distribution, and an SDS for hand sanitizer. For mask‑related categories, EN 149 or NIOSH N95 certification would be relevant.

What are the typical packaging and shipping options?

Gowns and caps are usually packed in sealed poly‑bagged cartons, with bulk shipments placed in 20‑ft or 40‑ft containers. Hand sanitizer drums or pallets are loaded directly onto pallets for container loading, commonly under FOB or CIF terms.

What are the minimum order quantities and lead times?

Standard gowns and caps often have an MOQ of a few hundred pieces and a lead time of 2‑4 weeks. Bulk hand sanitizer (drum or pallet) generally requires a higher MOQ and a lead time of 3‑5 weeks.

How can a buyer obtain product samples?

Buyers can request sample packs of gowns, caps, or sanitizer by specifying the desired product code and quantity. Samples are typically shipped using a small‑scale freight arrangement, allowing the buyer to assess material quality and packaging before placing a larger order.