About Value Trade Partners, LLC - Petroleum By Products Supplier in United States

Virginia, United States hosts Value Trade Partners, LLC, which lists 19 active products across a spectrum of energy, metal and sugar commodities. The catalogue includes copper cathode and copper millberry scrap, bitumen, liquefied natural gas (LNG) specified to GOST 5542‑87, petroleum coke, A7 aluminium ingots, liquefied petroleum gas (LPG) to GOST 20448‑90, Mazut M100, three ICUMSA sugar grades (45, 150, 600‑1200) and beet sugar, as well as export‑blend crude oil, jet fuel A1, diesel Euro 4/5, diesel EN590, gasoline 95 octane, diesel virgin fuel oil D6 and light cycle oil (LCO).

Product Range and Specialties of Value Trade Partners, LLC

The product list covers standard commodity families. Copper cathode typically meets C101 purity of 99.99 % and falls under HS chapter 74, while copper millberry scrap is classified in HS 7204 and is priced by tonnage. Bitumen and other asphalt products belong to HS 2710 and are graded by penetration (e.g., 60/70) and viscosity. LNG and LPG are shipped under HS 2711 with GOST quality certificates that define calorific value, sulfur content and water‑in‑oil limits. Petroleum coke (HS 2704) is usually supplied in 20‑ft or 40‑ft containers with moisture below 5 %. A7 aluminium ingots conform to 99.7 % Al purity and are covered by HS 7601. Sugar grades follow the ICUMSA scale - ICUMSA 45 is extra‑white, ICUMSA 150 is standard white, and ICUMSA 600‑1200 covers raw or beet‑derived sugar, all classified under HS 1701. Diesel, jet fuel and gasoline products are part of the HS 2710 family and are specified by sulfur content (≤10 ppm for EN590) and cetane or octane numbers.

Trade and Export Information - Value Trade Partners, LLC

United States exporters of petroleum and refined fuel products commonly ship to Europe, Southeast Asia and Latin America, using ocean tankers for bulk volumes and 20‑ft/40‑ft containers for specialty chemicals. Copper cathode and scrap are in high demand from China’s smelting sector and the EU’s manufacturing base, typically moving in bulk cargoes with pre‑shipment inspection under the International Trade Centre (ITC) guidelines. Sugar commodities from the U.S. are frequently destined for the Middle East and North Africa, where buyers request phytosanitary certificates and laboratory analysis confirming ICUMSA values. Standard certifications for these commodities include ISO 9001 quality management, ISO 14001 environmental compliance, and, where applicable, GOST certificates for LNG/LPG. Export documentation usually comprises a commercial invoice, packing list, bill of lading, Certificate of Origin, and any required sanitary or material safety data sheets.

Sourcing from Value Trade Partners, LLC - Buyer Guidance

Buyers should request a recent Certificate of Analysis (CoA) that details purity, sulfur content, moisture and calorific value for each fuel or metal product. For sugar, a laboratory report confirming the ICUMSA grade, ash content and moisture is essential, together with a phytosanitary certificate for plant‑origin sugars. Third‑party inspection reports (e.g., SGS, Bureau Veritas) and compliance with ISO 9001 are typical prerequisites before confirming a contract. Verify that the supplier can provide GOST documentation for LNG, LPG and Mazut, and ask for sample shipments when possible to test compliance with specification limits.

What metal products does Value Trade Partners, LLC list?

The catalogue includes copper cathode, copper millberry scrap and A7 aluminium ingots. Each product is classified under the relevant HS chapters for copper (74) and aluminium (76) and is offered in standard bulk forms.

Which fuel grades are available from this supplier?

Available fuels are LNG (GOST 5542‑87), LPG (GOST 20448‑90), export‑blend crude oil, jet fuel A1, diesel Euro 4/5, diesel EN590, diesel virgin fuel oil D6, gasoline 95 octane and light cycle oil. All fall under HS 2710/2711 and are specified by sulfur content, cetane or octane numbers and calorific value.

What sugar specifications are listed?

Three ICUMSA grades are listed - ICUMSA 45 (extra‑white), ICUMSA 150 (standard white) and ICUMSA 600‑1200 (raw or beet sugar). Beet sugar is also mentioned as a separate product. All are covered by HS 1701.

How are bulk petroleum products typically packaged for export?

Petroleum coke, bitumen and solid fuels are loaded into 20‑ft or 40‑ft containers with moisture limits below 5 %. Liquid fuels such as diesel, gasoline and jet fuel are shipped in ISO‑standard tankers with temperature‑controlled compartments.

What certifications should a buyer request for LNG and LPG?

Buyers should ask for the GOST quality certificate referenced in the product description, a recent CoA showing calorific value and sulfur limits, and an independent inspection report from a recognized third‑party lab.

Which markets commonly import U.S. copper cathode?

China’s smelting industry and the European Union’s metal manufacturing sector are the primary importers of U.S. copper cathode, typically under HS 7403 with purity specifications of 99.99 %.

What documentation is required for sugar shipments?

A commercial invoice, packing list, Certificate of Origin, phytosanitary certificate and a laboratory analysis confirming the ICUMSA grade are standard for sugar exports.

What are typical lead times for bulk fuel shipments?

Lead times depend on vessel availability but generally range from 2 weeks for container‑packed LPG to 4‑6 weeks for tanker‑loaded diesel or jet fuel, assuming all certificates and inspections are in place.