About Unity4wd Accessories Factory - Automobile & Auto Accessories Supplier in China

Unity4wd Accessories Factory is based in China and lists five distinct products in its catalogue. The company’s offerings fall under the categories Automobile & Auto Accessories, Agriculture, and Tents, Awnings & Accessories. Within the automotive segment it provides lift spacers for Nissan Navara and Toyota Hilux Vigo models and a snorkel designed for the Ford Ranger SS970HF. The tent segment includes two roof‑top tent models labelled Roof top tent‑1 and Roof top tent‑2. No additional product families are recorded in the supplied data.

Lift spacers are classified under HS Chapter 87 (vehicle parts) and are typically recorded under HS 8708. Snorkels for off‑road trucks are also grouped in HS 8708 as automotive accessories. Roof‑top tents are textile‑based camping equipment commonly recorded under HS Chapter 63, HS 6306. The catalogue does not specify material composition, but such items are usually fabricated from steel alloys for spacers, high‑density polyethylene or aluminum for snorkels, and rip‑stop polyester with aluminum frames for tents. Buyers should note the product count of five when evaluating the supplier’s breadth.

Product Range and Specialties of Unity4wd Accessories Factory

The current catalogue lists two lift spacers (for Nissan Navara and Toyota Hilux Vigo), one snorkel for a Ford Ranger SS970HF, and two roof‑top tent models. Lift spacers for 4‑wheel‑drive trucks are typically made from cold‑rolled steel or chrome‑vanadium alloy, with thicknesses ranging from 3 mm to 6 mm and bolt‑on dimensions matched to factory‑specified lift heights of 30 - 50 mm. Snorkels are usually injection‑moulded from UV‑stabilised polycarbonate or aluminium extrusion, designed to maintain air flow while providing water ingress protection, and are tested to IEC 60721‑3‑3 standards for vibration resistance. Roof‑top tents for the Chinese market often use 150‑200 gsm rip‑stop polyester with a waterproof coating (≥3000 mm water column) and aluminium lattice frames that support 150 kg load per person. Typical sizes range from 180 cm × 210 cm to 210 cm × 240 cm when deployed, and they pack into a 30 L to 45 L carry bag suitable for 20‑ft container loading.

Industry practice for these categories includes ISO 9001 quality management, CE marking for automotive accessories sold in the EU, and ASTM D 388 for fabric water‑proofness on tents. Buyers frequently request material test reports (tensile strength for steel, impact resistance for polycarbonate, UV‑fade resistance for fabric) and dimensional drawings to verify fit‑ment on specific vehicle models.

Trade and Export Information - Unity4wd Accessories Factory

China remains one of the world’s largest exporters of automotive aftermarket parts and portable camping equipment. Lift spacers and snorkels from Chinese manufacturers are routinely shipped to markets in Southeast Asia, the Middle East, Africa, and Europe, where off‑road and utility vehicle owners retrofit their trucks for increased ground clearance. Roof‑top tents are in demand across Europe, North America, and Oceania for adventure tourism, and are typically exported in bulk‑packed cartons of 10‑12 units per 40‑ft container. Common certification requirements include CE for EU imports, ISO 9001 for quality assurance, and, for certain regions, the China Compulsory Certification (CCC) for automotive accessories. Standard Incoterms used are FOB Shanghai or CIF Los Angeles, with goods usually loaded in wooden crates or reinforced cardboard boxes that meet ISPM 15 phytosanitary standards for wooden packaging.

Regulatory considerations for automotive accessories involve compliance with the EU’s REACH chemical safety regulation and the US EPA’s vehicle emissions standards when the product incorporates any fluid‑handling components. Tent manufacturers must ensure compliance with the International Maritime Dangerous Goods (IMDG) Code for any fire‑retardant treatments applied to fabrics. Export documentation typically includes a commercial invoice, packing list, certificate of origin, and test reports for material strength or waterproofness, depending on the buyer’s market.

Sourcing from Unity4wd Accessories Factory - Buyer Guidance

When sourcing lift spacers, request a detailed engineering drawing that shows bolt‑hole pattern, spacer thickness, and material grade (e.g., ASTM A36 steel). For snorkels, ask for a UV‑stabilisation certificate and impact‑test results that meet IEC 60721‑3‑3. Roof‑top tents should be supplied with fabric water‑proofness test data (minimum 3000 mm water column) and frame load‑capacity certificates (minimum 150 kg per person). Verify that any CE or ISO 9001 certificates are current and that test reports are signed by an accredited laboratory. Confirm packaging details: lift spacers are usually packed in corrugated boxes with inner foam inserts, snorkels in double‑wall boxes, and tents in reinforced cartons with the folded tent and frame bundled together. Ask the supplier to provide a sample or pre‑production prototype before committing to a full order, especially to check fit on the specific vehicle chassis. Review the supplier’s export documentation checklist to ensure all required certificates, test reports, and origin statements are prepared for customs clearance in the target market.

What material is used for the Nissan Navara lift spacer?

The catalogue does not specify, but lift spacers for 4‑wheel‑drive trucks are typically fabricated from cold‑rolled steel or chrome‑vanadium alloy with a thickness of 3‑6 mm.

Does the Ford Ranger snorkel meet any safety standards?

Snorkels of this type are usually tested to IEC 60721‑3‑3 for vibration resistance and may carry a CE mark if the supplier has obtained it.

What are the typical dimensions of the roof‑top tents offered?

Chinese roof‑top tents commonly deploy to sizes between 180 cm × 210 cm and 210 cm × 240 cm and pack into 30‑45 L carry bags suitable for container loading.

Which certifications should a buyer request for these automotive accessories?

Buyers should request current ISO 9001 quality‑management certification, CE marking for EU markets, and, if applicable, China Compulsory Certification (CCC) for automotive parts.

What is the usual minimum order quantity for the lift spacers?

Suppliers of automotive lift spacers often set a MOQ of 100 units per model, but the exact figure must be confirmed with Unity4wd Accessories Factory.

What packaging is used for the roof‑top tents during export?

Roof‑top tents are typically packed in reinforced cardboard cartons with the folded tent, frame, and accessories bundled together, and the cartons are stacked on wooden pallets that comply with ISPM 15.

How long is the typical lead time for a batch of snorkels?

Lead times for injection‑moulded snorkels from Chinese factories generally range from 20 to 35 working days after receipt of a confirmed purchase order and approved sample.

Can I request a material test report for the steel used in the lift spacers?

Yes, buyers should ask for a tensile‑strength test report that references the applicable ASTM or ISO steel grade standard before placing a large order.