About Tresee Lights Co.,Ltd - Electric Lamps Supplier in China

Tresee Lights Co.,Ltd is based in China and currently lists eight distinct lighting products on its catalogue. The supplier’s portfolio falls under the primary categories of Electric Lamps, Tubes, Bulbs, Lights & Light Fittings and Light Emitting Diode products, with a secondary focus on agricultural lighting applications. Each item is a type of LED or LED‑enhanced lamp, ranging from small G‑type base bulbs to flat ceiling panels. In international trade classification these goods are normally recorded under HS Chapter 85, sub‑heading 8542 for lamps and light fittings. The catalogue includes products such as Small LED Bulbs with G4, G8, G9, Gy6.35 and BAY15S bases, Smart LED Pendant Lights, Halogen‑style LED G9 bulbs, Tiny E14 LED lamps, 12 V capsule LEDs, refrigerator LEDs, and flat ceiling LED panels.

All listed items operate on standard mains voltages of 220‑240 V or low‑voltage 12 V DC, with power ratings between 2 W and 48 W as indicated in the product titles. The small‑base LEDs are offered in configurations such as 2 W, 3 W and 12 W, while the pendant lights are described as 36 W and 48 W linear lamps. The flat ceiling panels are supplied in 60 × 60 cm and 30 × 30 cm dimensions, typical for commercial and residential indoor lighting. The product set reflects common LED lighting formats used for general illumination, refrigerated displays, and decorative pendant applications. These specifications align with the standard IEC 60598 safety and performance requirements for luminaires.

Product Range and Specialties of Tresee Lights Co.,Ltd

Tresee Lights’ eight products cover a spectrum of LED lighting formats that are standard in the industry. Small G‑type base LEDs such as G4, G8, G9 and Gy6.35 are usually supplied with colour temperatures between 2700 K and 6500 K, CRI values of 80 + , and luminous efficacies of 90‑110 lm W⁻¹. The Smart LED Pendant Lights, marketed at 36 W and 48 W, typically incorporate dimmable drivers and a colour temperature of 3000 K to 4000 K, meeting IEC 60598‑2‑1 and often carry CE or UL certification. Capsule LEDs for 12 V applications are commonly used in horticultural or low‑voltage fixtures and are rated for IP20 protection. Flat ceiling LED panels of 60 × 60 cm and 30 × 30 cm usually deliver 18‑40 W power, 100‑130 lm W⁻¹ efficacy and are supplied with a standard 2‑pin or 4‑pin connector, fitting the IEC 60598‑2‑30 panel‑light requirements.

Trade and Export Information - Tresee Lights Co.,Ltd

China is a major exporter of LED lighting, and products similar to those listed by Tresee Lights are regularly shipped to Europe, North America, the Middle East and Southeast Asian markets. The HS code family 8542.31 (LED lamps) and 8541.10 (LED diodes) are the primary tariff classifications for these items, and customs authorities often request conformity certificates such as CE, RoHS, and UL listings. Buyers typically require test reports for luminous flux, colour temperature, power factor and safety compliance with IEC 60598. Packaging is generally in double‑wall cardboard cartons, with 20 ft containers holding approximately 1,500‑2,000 units depending on size, and 40 ft containers up to 4,000 units. Common Incoterms used by Chinese LED manufacturers include FOB Shanghai and CIF destinations in Europe or the United States.

Sourcing from Tresee Lights Co.,Ltd - Buyer Guidance

Prospective buyers should request the supplier’s product data sheets that detail voltage, wattage, luminous flux (lm), colour temperature (K), CRI, IP rating and efficiency. Verification of CE or RoHS compliance, together with a third‑party test report (e.g., SGS or Intertek), is standard practice before confirming an order. Samples of the small‑base LEDs and panel lights are typically offered in quantities of 10‑20 pieces, allowing assessment of colour consistency and build quality. Minimum order quantities for bulk shipments usually start at 500‑1,000 units per SKU, with a typical lead time of 25‑35 days from order receipt. Buyers should also confirm packaging dimensions, palletisation method and whether the shipment will be made under FOB or CIF terms.

What types of LED bases are available from Tresee Lights?

Tresee Lights lists LEDs with G4, G8, G9, Gy6.35, BAY15S, E14 and 12 V capsule bases, covering both low‑voltage and mains‑voltage applications.

Are the pendant lights dimmable and what power options exist?

The Smart LED Pendant Lights are offered in 36 W and 48 W variants and are equipped with dimmable drivers compatible with standard 0‑10 V or TRIAC dimming circuits.

Which certifications should a buyer ask for?

Buyers should request CE and RoHS certificates, as well as any UL or IEC 60598 test reports that verify safety and electromagnetic compatibility for LED luminaires.

What are the typical dimensions and power for the ceiling panels?

The flat ceiling LED panels are supplied in 60 × 60 cm and 30 × 30 cm sizes, with power ratings ranging from 18 W to 40 W depending on the model.

How are the products packaged for export?

Products are packed in reinforced cardboard boxes, stacked on wooden pallets, and loaded into 20 ft or 40 ft containers according to standard industry loading plans for lighting goods.

What is the usual lead time and minimum order quantity?

Lead times are generally 25‑35 days after order confirmation, and minimum order quantities are typically 500‑1,000 units per product SKU.

Which HS codes apply to these lighting products?

The LED bulbs and lamps fall under HS code 8542.31 (LED lamps) while the LED panels are classified under HS code 8541.10 (LED diodes and light‑emitting devices).